question
stringlengths 236
348k
| answer
stringlengths 10
2.11k
|
|---|---|
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Problem 1: nothing provides requested (crate(picky) >= 7.0.0~rc.12 with crate(picky) < 8.0.0~)
Problem 2: nothing provides requested (crate(picky-krb/default) >= 0.9.0 with crate(picky-krb/default) < 0.10.0~)
Problem 3: nothing provides requested (crate(picky/x509) >= 7.0.0~rc.12 with crate(picky/x509) < 8.0.0~)
Problem 4: nothing provides requested (crate(uuid/default) >= 1.15.0 with crate(uuid/default) < 2.0.0~)
Problem 5: nothing provides requested (crate(uuid/v4) >= 1.15.0 with crate(uuid/v4) < 2.0.0~) | Package manager reports issues with resolution of dependencies. 5 required packages were not found in installed repositories. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/llvm-20.0.0~pre20241209.g1dfa34c8e1f289-3.fc40.aarch64
error: Installed (but unpackaged) file(s) found:
/usr/bin/mlir-rewrite
/usr/lib/debug/usr/bin/mlir-rewrite-20.0.0~pre20241209.g1dfa34c8e1f289-3.fc40.aarch64.debug
]: [Files /usr/bin/mlir-rewrite and /usr/lib/debug/usr/bin/mlir-rewrite-20.0.0~pre20241209.g1dfa34c8e1f289-3.fc40.aarch64.debug are not included in the final package.
]
| Issue: The error message indicates that the RPM package installation process detected files that were installed on the system but were not included in the RPM package itself. This is a common issue in package maintenance.
Resolution: Missing Files: Ensure that all necessary files are included in the RPM package. This might involve adjusting the spec file section %files to include additional files or directories.
Incorrect File Permissions: Verify that the file permissions of the included files are correct. Incorrect permissions can prevent the RPM package manager from installing files properly. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/llvm-20.0.0~pre20241209.g1dfa34c8e1f289-3.fc40.aarch64
error: Installed (but unpackaged) file(s) found:
/usr/bin/mlir-rewrite
/usr/lib/debug/usr/bin/mlir-rewrite-20.0.0~pre20241209.g1dfa34c8e1f289-3.fc40.aarch64.debug
| Files /usr/bin/mlir-rewrite and /usr/lib/debug/usr/bin/mlir-rewrite-20.0.0~pre20241209.g1dfa34c8e1f289-3.fc40.aarch64.debug are not included in the final package.
|
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[> [email protected] unit
> borp --reporter=@jsumners/line-reporter --coverage --check-coverage
RangeError [ERR_OUT_OF_RANGE]: The value of "options.concurrency" is out of range. It must be >= 1 && <= 4294967295. Received 0
at new Test (node:internal/test_runner/test:475:9)
at createTestTree (node:internal/test_runner/harness:82:16)
at run (node:internal/test_runner/runner:676:16)
at runWithTypeScript (file:///opt/app-root/src/node_modules/borp/lib/run.js:237:12)
at async file:///opt/app-root/src/node_modules/borp/borp.js:150:18 {
code: 'ERR_OUT_OF_RANGE'
}
Test for image 'ubi10/nodejs-22:1' FAILED (exit code: 1)
Test for image 'ubi10/nodejs-22:1' FAILED (exit code: 1)]: [> [email protected] unit
> borp --reporter=@jsumners/line-reporter --coverage --check-coverage
RangeError [ERR_OUT_OF_RANGE]: The value of "options.concurrency" is out of range. It must be >= 1 && <= 4294967295. Received 0
at new Test (node:internal/test_runner/test:475:9)
at createTestTree (node:internal/test_runner/harness:82:16)
at run (node:internal/test_runner/runner:676:16)
at runWithTypeScript (file:///opt/app-root/src/node_modules/borp/lib/run.js:237:12)
at async file:///opt/app-root/src/node_modules/borp/borp.js:150:18 {
code: 'ERR_OUT_OF_RANGE'
}
Test for image 'ubi10/nodejs-22:1' FAILED (exit code: 1)
Test for image 'ubi10/nodejs-22:1' FAILED (exit code: 1)]
| Issue: Unit tests for fastify from upstream github repository failed.
Resolution: Please check upstream repository and fix this issue in upstream as well. Also please do not forget to report this issue, in case it is not fixed yet. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
> [email protected] unit
> borp --reporter=@jsumners/line-reporter --coverage --check-coverage
RangeError [ERR_OUT_OF_RANGE]: The value of "options.concurrency" is out of range. It must be >= 1 && <= 4294967295. Received 0
at new Test (node:internal/test_runner/test:475:9)
at createTestTree (node:internal/test_runner/harness:82:16)
at run (node:internal/test_runner/runner:676:16)
at runWithTypeScript (file:///opt/app-root/src/node_modules/borp/lib/run.js:237:12)
at async file:///opt/app-root/src/node_modules/borp/borp.js:150:18 {
code: 'ERR_OUT_OF_RANGE'
}
Test for image 'ubi10/nodejs-22:1' FAILED (exit code: 1)
Test for image 'ubi10/nodejs-22:1' FAILED (exit code: 1) | > [email protected] unit
> borp --reporter=@jsumners/line-reporter --coverage --check-coverage
RangeError [ERR_OUT_OF_RANGE]: The value of "options.concurrency" is out of range. It must be >= 1 && <= 4294967295. Received 0
at new Test (node:internal/test_runner/test:475:9)
at createTestTree (node:internal/test_runner/harness:82:16)
at run (node:internal/test_runner/runner:676:16)
at runWithTypeScript (file:///opt/app-root/src/node_modules/borp/lib/run.js:237:12)
at async file:///opt/app-root/src/node_modules/borp/borp.js:150:18 {
code: 'ERR_OUT_OF_RANGE'
}
Test for image 'ubi10/nodejs-22:1' FAILED (exit code: 1)
Test for image 'ubi10/nodejs-22:1' FAILED (exit code: 1) |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[FAILED: gen/ui/webui/resources/cr_components/page_image_service/eslint.config.mjs
/usr/bin/python3 ../../ui/webui/resources/tools/eslint_ts.py --in_folder gen/ui/webui/resources/cr_components/page_image_service/preprocessed --out_folder gen/ui/webui/resources/cr_components/page_image_service --config_base ../../../../../../../../ui/webui/resources/tools/eslint_ts.config_base.mjs --tsconfig tsconfig_build_ts.json --in_files browser_proxy.ts
Traceback (most recent call last):
File "/builddir/build/BUILD/chromium-135.0.7049.52/out/Headless/../../ui/webui/resources/tools/eslint_ts.py", line 78, in <module>
main(sys.argv[1:])
File "/builddir/build/BUILD/chromium-135.0.7049.52/out/Headless/../../ui/webui/resources/tools/eslint_ts.py", line 67, in main
node.RunNode([
File "/builddir/build/BUILD/chromium-135.0.7049.52/third_party/node/node.py", line 38, in RunNode
raise RuntimeError('Command \'%s\' failed\n%s' % (' '.join(cmd), err))
RuntimeError: Command '/builddir/build/BUILD/chromium-135.0.7049.52/third_party/node/linux/node-linux-x64/bin/node /builddir/build/BUILD/chromium-135.0.7049.52/third_party/node/node_modules/eslint/bin/eslint --color --quiet --config gen/ui/webui/resources/cr_components/page_image_service/eslint.config.mjs gen/ui/webui/resources/cr_components/page_image_service/preprocessed/browser_proxy.ts' failed
Oops! Something went wrong! :(
ESLint: 9.20.1
TypeError [ERR_INVALID_ARG_TYPE]: The "path" argument must be of type string. Received undefined
at new NodeError (node:internal/errors:387:5)
at validateString (node:internal/validators:162:11)
at Object.join (node:path:1172:7)
at file:///builddir/build/BUILD/chromium-135.0.7049.52/out/Headless/gen/ui/webui/resources/cr_components/page_image_service/eslint.config.mjs?mtime=1743548061456:10:26
at ModuleJob.run (node:internal/modules/esm/module_job:193:25)
at async Promise.all (index 0)
at async ESMLoader.import (node:internal/modules/esm/loader:530:24)
at async importModuleDynamicallyWrapper (node:internal/vm/module:438:15)
at async loadConfigFile (/builddir/build/BUILD/chromium-135.0.7049.52/third_party/node/node_modules/eslint/lib/config/config-loader.js:197:21)
at async Function.calculateConfigArray (/builddir/build/BUILD/chromium-135.0.7049.52/third_party/node/node_modules/eslint/lib/config/config-loader.]: [the relevant error messages indicate that there's an outdated version of Node.js can indeed cause unexpected errors, especially when dealing with newer features or dependencies in tools like ESLint. The TypeError [ERR_INVALID_ARG_TYPE] related to path manipulation could arise if the older Node.js version has subtle differences in its path module implementation or if ESLint relies on newer Node.js APIs.]
| Issue: the build failed due to the old nodejs (16.x)
Resolution: Update nodejs to version 22 fixes the build failure |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
FAILED: gen/ui/webui/resources/cr_components/page_image_service/eslint.config.mjs
/usr/bin/python3 ../../ui/webui/resources/tools/eslint_ts.py --in_folder gen/ui/webui/resources/cr_components/page_image_service/preprocessed --out_folder gen/ui/webui/resources/cr_components/page_image_service --config_base ../../../../../../../../ui/webui/resources/tools/eslint_ts.config_base.mjs --tsconfig tsconfig_build_ts.json --in_files browser_proxy.ts
Traceback (most recent call last):
File "/builddir/build/BUILD/chromium-135.0.7049.52/out/Headless/../../ui/webui/resources/tools/eslint_ts.py", line 78, in <module>
main(sys.argv[1:])
File "/builddir/build/BUILD/chromium-135.0.7049.52/out/Headless/../../ui/webui/resources/tools/eslint_ts.py", line 67, in main
node.RunNode([
File "/builddir/build/BUILD/chromium-135.0.7049.52/third_party/node/node.py", line 38, in RunNode
raise RuntimeError('Command \'%s\' failed\n%s' % (' '.join(cmd), err))
RuntimeError: Command '/builddir/build/BUILD/chromium-135.0.7049.52/third_party/node/linux/node-linux-x64/bin/node /builddir/build/BUILD/chromium-135.0.7049.52/third_party/node/node_modules/eslint/bin/eslint --color --quiet --config gen/ui/webui/resources/cr_components/page_image_service/eslint.config.mjs gen/ui/webui/resources/cr_components/page_image_service/preprocessed/browser_proxy.ts' failed
Oops! Something went wrong! :(
ESLint: 9.20.1
TypeError [ERR_INVALID_ARG_TYPE]: The "path" argument must be of type string. Received undefined
at new NodeError (node:internal/errors:387:5)
at validateString (node:internal/validators:162:11)
at Object.join (node:path:1172:7)
at file:///builddir/build/BUILD/chromium-135.0.7049.52/out/Headless/gen/ui/webui/resources/cr_components/page_image_service/eslint.config.mjs?mtime=1743548061456:10:26
at ModuleJob.run (node:internal/modules/esm/module_job:193:25)
at async Promise.all (index 0)
at async ESMLoader.import (node:internal/modules/esm/loader:530:24)
at async importModuleDynamicallyWrapper (node:internal/vm/module:438:15)
at async loadConfigFile (/builddir/build/BUILD/chromium-135.0.7049.52/third_party/node/node_modules/eslint/lib/config/config-loader.js:197:21)
at async Function.calculateConfigArray (/builddir/build/BUILD/chromium-135.0.7049.52/third_party/node/node_modules/eslint/lib/config/config-loader. | the relevant error messages indicate that there's an outdated version of Node.js can indeed cause unexpected errors, especially when dealing with newer features or dependencies in tools like ESLint. The TypeError [ERR_INVALID_ARG_TYPE] related to path manipulation could arise if the older Node.js version has subtle differences in its path module implementation or if ESLint relies on newer Node.js APIs. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[Failed to resolve the transaction:
No match for argument: golang >= 1.23.2]: [Reason why the package cannot be built]
=============
[Failed to resolve the transaction:
No match for argument: golang >= 1.23.2]: [Reason why the package cannot be built]
=============
[Failed to resolve the transaction:
No match for argument: golang >= 1.23.2]: [Reason why the package cannot be built]
| Issue: Available version of `golang` in the repos doesn't satisfy the minimal requirements
Resolution: Evaluate whether the version requirement is needed, or package the appropriate version of the Go that satisfies the requirement. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Failed to resolve the transaction:
No match for argument: golang >= 1.23.2 | Reason why the package cannot be built |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Failed to resolve the transaction:
No match for argument: golang >= 1.23.2 | Reason why the package cannot be built |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Failed to resolve the transaction:
No match for argument: golang >= 1.23.2 | Reason why the package cannot be built |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[ Bad exit status from /var/tmp/rpm-tmp.ubnxKR (%build)]: [the problem is in the build section ]
=============
[bannergrab.c:653:36: error: passing argument 2 of ‘signal’ from incompatible pointer type [-Wincompatible-pointer-types]
653 | signal(14, timeoutHandler);
| ^~~~~~~~~~~~~~
| |
| void (*)(void)]: [Detailed description of the issue ]
=============
[error: passing argument 2 of ‘signal’ from incompatible pointer type [-Wincompatible-pointer-types]
679 | signal(14, timeoutHandler);
| ^~~~~~~~~~~~~~
| |
| void (*)(void)]: [Detailed description of error]
| Issue: There is an issue in the source code, probably the API of signal function has changed, so the input arguments must be adjusted
Resolution: Adjust the input arguments to be compatible with the new API. make downstream patch or contact upstream |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Bad exit status from /var/tmp/rpm-tmp.ubnxKR (%build) | the problem is in the build section |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
bannergrab.c:653:36: error: passing argument 2 of ‘signal’ from incompatible pointer type [-Wincompatible-pointer-types]
653 | signal(14, timeoutHandler);
| ^~~~~~~~~~~~~~
| |
| void (*)(void) | Detailed description of the issue |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
error: passing argument 2 of ‘signal’ from incompatible pointer type [-Wincompatible-pointer-types]
679 | signal(14, timeoutHandler);
| ^~~~~~~~~~~~~~
| |
| void (*)(void) | Detailed description of error |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[=================================== FAILURES ===================================
_________________________________ test_semfree _________________________________]: [This is the start of the test failure output. test_semfree failed.]
=============
[> assert exitcode in (ExitCode.ok, ExitCode.pdfa_conversion_failed)
E assert <ExitCode.other_error: 15> in (<ExitCode.ok: 0>, <ExitCode.pdfa_conversion_failed: 10>)
]: [Test asserts that the exitcode is either ok or pdfa_conversion_failed. That assertion fails, because the test ended with ExitCode.other_error: 15 which is not in the list of the allowed exitcodes.]
=============
[ERROR ocrmypdf._pipelines._common:_common.py:296 An exception occurred while executing the pipeline
Traceback (most recent call last):
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/_pipelines/_common.py", line 261, in cli_exception_handler
return fn(options, plugin_manager)
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/_pipelines/ocr.py", line 181, in _run_pipeline
optimize_messages = exec_concurrent(context, executor)
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/_pipelines/ocr.py", line 145, in exec_concurrent
pdf, messages = postprocess(pdf, context, executor)
~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/_pipelines/_common.py", line 460, in postprocess
return optimize_pdf(pdf_out, context, executor)
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/_pipeline.py", line 984, in optimize_pdf
output_pdf, messages = context.plugin_manager.hook.optimize_pdf(
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
input_pdf=input_file,
^^^^^^^^^^^^^^^^^^^^^
...<3 lines>...
linearize=should_linearize(input_file, context),
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
)
^
File "/usr/lib/python3.14/site-packages/pluggy/_hooks.py", line 513, in __call__
return self._hookexec(self.name, self._hookimpls.copy(), kwargs, firstresult)
~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.14/site-packages/pluggy/_manager.py", line 120, in _hookexec
return self._inner_hookexec(hook_name, methods, kwargs, firstresult)
~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.14/site-packages/pluggy/_callers.py", line 139, in _multicall
raise exception.with_traceback(exception.__traceback__)
File "/usr/lib/python3.14/site-packages/pluggy/_callers.py", line 103, in _multicall
res = hook_impl.function(*args)
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/builtin_plugins/optimize.py", line 145, in optimize_pdf
result_path = optimize(input_pdf, output_pdf, context, save_settings, executor)
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/optimize.py", line 705, in optimize
deflate_jpegs(pdf, root, options, executor)
~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/optimize.py", line 575, in deflate_jpegs
executor(
~~~~~~~~^
use_threads=True, # We're sharing the pdf directly, must use threads
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...<9 lines>...
task_finished=finish,
^^^^^^^^^^^^^^^^^^^^^
)
^
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/_concurrent.py", line 78, in __call__
self._execute(
~~~~~~~~~~~~~^
use_threads=use_threads,
^^^^^^^^^^^^^^^^^^^^^^^^
...<5 lines>...
task_finished=task_finished,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
)
^
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/extra_plugins/semfree.py", line 157, in _execute
process.start()
~~~~~~~~~~~~~^^
File "/usr/lib64/python3.14/multiprocessing/process.py", line 121, in start
self._popen = self._Popen(self)
~~~~~~~~~~~^^^^^^
File "/usr/lib64/python3.14/multiprocessing/context.py", line 224, in _Popen
return _default_context.get_context().Process._Popen(process_obj)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^
File "/usr/lib64/python3.14/multiprocessing/context.py", line 300, in _Popen
return Popen(process_obj)
File "/usr/lib64/python3.14/multiprocessing/popen_forkserver.py", line 35, in __init__
super().__init__(process_obj)
~~~~~~~~~~~~~~~~^^^^^^^^^^^^^
File "/usr/lib64/python3.14/multiprocessing/popen_fork.py", line 20, in __init__
self._launch(process_obj)
~~~~~~~~~~~~^^^^^^^^^^^^^
File "/usr/lib64/python3.14/multiprocessing/popen_forkserver.py", line 47, in _launch
reduction.dump(process_obj, buf)
~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^
File "/usr/lib64/python3.14/multiprocessing/reduction.py", line 60, in dump
ForkingPickler(file, protocol).dump(obj)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^
TypeError: cannot pickle 'pikepdf._core.Pdf' object
when serializing tuple item 0
when serializing list item 0
when serializing tuple item 4
when serializing dict item '_args'
when serializing multiprocessing.context.Process state
when serializing multiprocessing.context.Process object]: [This shows an extended log of the failed test. The error originates in multiprocessing library with Python 3.14. The test code starts a new process with a context called "forkserver" and it is unsuccessful. This failure is displayed as TypeError: cannot pickle 'pikepdf._core.Pdf' object, but the actual issue comes from from multiprocessing module.]
=============
[FAILED tests/test_semfree.py::test_semfree - assert <ExitCode.other_error: 15...]: [This shows the full path of the failed test]
| Issue: Python 3.14 has changed the default process spawning context method for Linux from "fork" to "forkserver". This makes the code of the test incompatible. This is a new feature of Python 3.14.
Resolution: The code of the package tests should take into account the changed context when processes are started. If "fork" is still a desired way of running new processes, it can mean using function multiprocessing.get_context to set the method to "fork", like this:
if multiprocessing.get_start_method() == "forkserver":
_mp_context = multiprocessing.get_context(method="fork")
else:
_mp_context = multiprocessing.get_context()
and then use the newly defined _mp_context variable to define the processes. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
=================================== FAILURES ===================================
_________________________________ test_semfree _________________________________ | This is the start of the test failure output. test_semfree failed. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
> assert exitcode in (ExitCode.ok, ExitCode.pdfa_conversion_failed)
E assert <ExitCode.other_error: 15> in (<ExitCode.ok: 0>, <ExitCode.pdfa_conversion_failed: 10>)
| Test asserts that the exitcode is either ok or pdfa_conversion_failed. That assertion fails, because the test ended with ExitCode.other_error: 15 which is not in the list of the allowed exitcodes. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
ERROR ocrmypdf._pipelines._common:_common.py:296 An exception occurred while executing the pipeline
Traceback (most recent call last):
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/_pipelines/_common.py", line 261, in cli_exception_handler
return fn(options, plugin_manager)
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/_pipelines/ocr.py", line 181, in _run_pipeline
optimize_messages = exec_concurrent(context, executor)
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/_pipelines/ocr.py", line 145, in exec_concurrent
pdf, messages = postprocess(pdf, context, executor)
~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/_pipelines/_common.py", line 460, in postprocess
return optimize_pdf(pdf_out, context, executor)
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/_pipeline.py", line 984, in optimize_pdf
output_pdf, messages = context.plugin_manager.hook.optimize_pdf(
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
input_pdf=input_file,
^^^^^^^^^^^^^^^^^^^^^
...<3 lines>...
linearize=should_linearize(input_file, context),
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
)
^
File "/usr/lib/python3.14/site-packages/pluggy/_hooks.py", line 513, in __call__
return self._hookexec(self.name, self._hookimpls.copy(), kwargs, firstresult)
~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.14/site-packages/pluggy/_manager.py", line 120, in _hookexec
return self._inner_hookexec(hook_name, methods, kwargs, firstresult)
~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.14/site-packages/pluggy/_callers.py", line 139, in _multicall
raise exception.with_traceback(exception.__traceback__)
File "/usr/lib/python3.14/site-packages/pluggy/_callers.py", line 103, in _multicall
res = hook_impl.function(*args)
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/builtin_plugins/optimize.py", line 145, in optimize_pdf
result_path = optimize(input_pdf, output_pdf, context, save_settings, executor)
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/optimize.py", line 705, in optimize
deflate_jpegs(pdf, root, options, executor)
~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/optimize.py", line 575, in deflate_jpegs
executor(
~~~~~~~~^
use_threads=True, # We're sharing the pdf directly, must use threads
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...<9 lines>...
task_finished=finish,
^^^^^^^^^^^^^^^^^^^^^
)
^
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/_concurrent.py", line 78, in __call__
self._execute(
~~~~~~~~~~~~~^
use_threads=use_threads,
^^^^^^^^^^^^^^^^^^^^^^^^
...<5 lines>...
task_finished=task_finished,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
)
^
File "/builddir/build/BUILD/ocrmypdf-16.7.0-build/BUILDROOT/usr/lib/python3.14/site-packages/ocrmypdf/extra_plugins/semfree.py", line 157, in _execute
process.start()
~~~~~~~~~~~~~^^
File "/usr/lib64/python3.14/multiprocessing/process.py", line 121, in start
self._popen = self._Popen(self)
~~~~~~~~~~~^^^^^^
File "/usr/lib64/python3.14/multiprocessing/context.py", line 224, in _Popen
return _default_context.get_context().Process._Popen(process_obj)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^
File "/usr/lib64/python3.14/multiprocessing/context.py", line 300, in _Popen
return Popen(process_obj)
File "/usr/lib64/python3.14/multiprocessing/popen_forkserver.py", line 35, in __init__
super().__init__(process_obj)
~~~~~~~~~~~~~~~~^^^^^^^^^^^^^
File "/usr/lib64/python3.14/multiprocessing/popen_fork.py", line 20, in __init__
self._launch(process_obj)
~~~~~~~~~~~~^^^^^^^^^^^^^
File "/usr/lib64/python3.14/multiprocessing/popen_forkserver.py", line 47, in _launch
reduction.dump(process_obj, buf)
~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^
File "/usr/lib64/python3.14/multiprocessing/reduction.py", line 60, in dump
ForkingPickler(file, protocol).dump(obj)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^
TypeError: cannot pickle 'pikepdf._core.Pdf' object
when serializing tuple item 0
when serializing list item 0
when serializing tuple item 4
when serializing dict item '_args'
when serializing multiprocessing.context.Process state
when serializing multiprocessing.context.Process object | This shows an extended log of the failed test. The error originates in multiprocessing library with Python 3.14. The test code starts a new process with a context called "forkserver" and it is unsuccessful. This failure is displayed as TypeError: cannot pickle 'pikepdf._core.Pdf' object, but the actual issue comes from from multiprocessing module. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
FAILED tests/test_semfree.py::test_semfree - assert <ExitCode.other_error: 15... | This shows the full path of the failed test |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[
ModuleNotFoundError: No module named 'pat]: [It says there is a module not found.]
| Issue: Module named 'path' was not found.
Resolution: Module 'path' needs to be imported. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
ModuleNotFoundError: No module named 'pat | It says there is a module not found. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[
ImportError: cannot import name 'cached_property' from 'werkzeu]: [Relevant python error saying that `cached_property` cannot be imported from the `werkzeug` package.]
| Issue: This package doesn't work with the latest version of the `python3-werkzeug` package because Werkzeug introduced backward incompatible changes in its 1.0 version.
Upstream issue:
https://github.com/noirbizarre/flask-restplus/issues/777
Resolution: Specify the compatible version of the python3-werkzeug package in your specfile:
BuildRequires: python3-werkzeug >= 0.16.0
BuildRequires: python3-werkzeug < 1.0.0 |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
ImportError: cannot import name 'cached_property' from 'werkzeu | Relevant python error saying that `cached_property` cannot be imported from the `werkzeug` package. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[ela/date.c:7:16: error: cannot use keyword ‘false’ as enumeration constant
7 | typedef enum { false, true } bool;
| ^~~~~
ela/date.c:7:16: note: ‘false’ is a keyword with ‘-std=c23’ onwards
ela/date.c:7:30: error: expected ‘;’, identifier or ‘(’ before ‘bool’
7 | typedef enum { false, true } bool;
| ^~~~
ela/date.c:7:30: warning: useless type name in empty declaration]: [The relevant error message saying that bool, true and false are now keywords]
| Issue: The build failed because bool, true and false are now really keyword with gcc 15 which defaults to C23.
Resolution: replace the line "typedef enum { false, true } bool;" in ela/date.c with "#include <stdbool.h>
" |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
ela/date.c:7:16: error: cannot use keyword ‘false’ as enumeration constant
7 | typedef enum { false, true } bool;
| ^~~~~
ela/date.c:7:16: note: ‘false’ is a keyword with ‘-std=c23’ onwards
ela/date.c:7:30: error: expected ‘;’, identifier or ‘(’ before ‘bool’
7 | typedef enum { false, true } bool;
| ^~~~
ela/date.c:7:30: warning: useless type name in empty declaration | The relevant error message saying that bool, true and false are now keywords |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[compress.c:618:1: warning: data definition has no type or storage class
618 | zero = 0;
| ^~~~
compress.c:618:1: error: type defaults to 'int' in declaration of 'zero' [-Wimplicit-int]]: [The build is failing due to a compiler error related to a implicit ‘int’ declaration.]
| Issue: The build failed because of compiler reports the error about [-Wimplicit-int].
Resolution: Check the file, line, and variable reported in the compiler error for a missing type declaration. Add ‘int’ to this variable. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
compress.c:618:1: warning: data definition has no type or storage class
618 | zero = 0;
| ^~~~
compress.c:618:1: error: type defaults to 'int' in declaration of 'zero' [-Wimplicit-int] | The build is failing due to a compiler error related to a implicit ‘int’ declaration. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[
/usr/bin/ld: ../DiscIO/libdiscio.a(CompressedBlob.cpp.o): undefined reference to symbol 'inflateEnd'
/usr/bin/ld: /usr/lib64/libz.so.1: error adding symbols: DSO missing from command li]: [Incorrect reference to symbol 'inflateEnd']
| Issue: The dependency minizip-ng has been rebased to new major version, which must have changed it symbols in the library
Resolution: The maintainer should check the changes in the new minizip-ng library and change the source code to adhere to these changes. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
/usr/bin/ld: ../DiscIO/libdiscio.a(CompressedBlob.cpp.o): undefined reference to symbol 'inflateEnd'
/usr/bin/ld: /usr/lib64/libz.so.1: error adding symbols: DSO missing from command li | Incorrect reference to symbol 'inflateEnd' |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[============================================================================
Testsuite summary for Varnish 7.6.1
============================================================================
# TOTAL: 877
# PASS: 813
# SKIP: 25
# XFAIL: 0
# FAIL: 39
# XPASS: 0
# ERROR: 0
============================================================================]: [It show that tests from the testsuite actually failed. ]
| Issue: The build failed because the patch varnish-7.6.1-CVE-2025-47905.patch wasn't correctly backported.
Resolution: Backport upstream fixes for CVE-2025-47905 correctly so tests from the upstream testsuite are not failing. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
============================================================================
Testsuite summary for Varnish 7.6.1
============================================================================
# TOTAL: 877
# PASS: 813
# SKIP: 25
# XFAIL: 0
# FAIL: 39
# XPASS: 0
# ERROR: 0
============================================================================ | It show that tests from the testsuite actually failed. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[Running webpack...
make: *** [Makefile:924: public/assets/js/index.js] Segmentation fault (core dumped)
]: [Webpack failed as a part of make.]
=============
[error: Bad exit status from /var/tmp/rpm-tmp.3XOkK4 (%build)
]: [Failed on %build]
| Issue: Problem is likely with mismatch of js modules/common js in webpack
Resolution: Try changing webpack's config file extension from .js to .mjs |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Running webpack...
make: *** [Makefile:924: public/assets/js/index.js] Segmentation fault (core dumped)
| Webpack failed as a part of make. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
error: Bad exit status from /var/tmp/rpm-tmp.3XOkK4 (%build)
| Failed on %build |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[
checking whether the C compiler works... ]: [The ./configure commands looks for gcc and can't find it]
| Issue: The gcc command is not available in the buildroot
Resolution: Edit the spec file and add a new buildtime dependency for gcc.
BuildRequires: gcc
|
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
checking whether the C compiler works... | The ./configure commands looks for gcc and can't find it |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[cd: git-xcleaner-3.0: No such file or directory]: [This shows that an expected directory wasn't found when the source archive was extracted]
| Issue: The source archive didn't contain the expected top-level directory.
Resolution: Verify the contents of the source archive. Maybe the archive includes a different program version than expected. Maybe it wasn't created correctly. Or perhaps the spec file specifies a hardcoded directory name which doesn't match the actual archive contents. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
cd: git-xcleaner-3.0: No such file or directory | This shows that an expected directory wasn't found when the source archive was extracted |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[
Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.Hhv7]: [The Executing(%check) is the section that fails. ]
=============
[/builddir/build/BUILD/webmock-3.18.1/usr/share/gems/gems/webmock-3.18.1/minitest/test_helper.rb:13:in `<top (required)>': uninitialized constant MiniTest (NameError)
test_class = defined?(MiniTest::Test) ? MiniTest::Test : MiniTest::Unit::TestCase
^^^^^^^^
Did you mean? Minitest
from <internal:/usr/share/rubygems/rubygems/core_ext/kernel_require.rb>:127:in `require'
from <internal:/usr/share/rubygems/rubygems/core_ext/kernel_require.rb>:127:in `require'
from <internal:dir>:411:in `glob'
from -e:1:in `<main>']: [The compilation of a test file (because we are in the %check section) failed here, claiming that the `MiniTest` ruby package doesn't exist.]
| Issue: The `MiniTest` ruby package is not available at the ruby compilation time.
Resolution: If the MiniTest package exists, you need to make it available on rubypath. If not, you need to provide the MiniTest package. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.Hhv7 | The Executing(%check) is the section that fails. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
/builddir/build/BUILD/webmock-3.18.1/usr/share/gems/gems/webmock-3.18.1/minitest/test_helper.rb:13:in `<top (required)>': uninitialized constant MiniTest (NameError)
test_class = defined?(MiniTest::Test) ? MiniTest::Test : MiniTest::Unit::TestCase
^^^^^^^^
Did you mean? Minitest
from <internal:/usr/share/rubygems/rubygems/core_ext/kernel_require.rb>:127:in `require'
from <internal:/usr/share/rubygems/rubygems/core_ext/kernel_require.rb>:127:in `require'
from <internal:dir>:411:in `glob'
from -e:1:in `<main>' | The compilation of a test file (because we are in the %check section) failed here, claiming that the `MiniTest` ruby package doesn't exist. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[
No matching package to install: 'python3.11dist(hatchling) >= 1.11]: [The package ''python3.11dist" does not exist or does not ship the version "1.11".]
=============
[
Not all dependencies satisfied
Error: Some packages could not be found]: [Missing dependencies due to unavailability of some packages.]
| Issue: Unmet dependencies
Resolution: Either choose a different package or make it available by allowing a different package repository. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
No matching package to install: 'python3.11dist(hatchling) >= 1.11 | The package ''python3.11dist" does not exist or does not ship the version "1.11". |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Not all dependencies satisfied
Error: Some packages could not be found | Missing dependencies due to unavailability of some packages. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[
Error:
Problem: cannot install the best candidate for the job
- nothing provides clang = 13.0.0 needed by clang-rpm-macros-1-136.el115.noarch from https_download_copr_fedorainfracloud_org_results_fedora_llvm_team_clang_rpm_macros_fedora_releasever_basearc]: [No provider for the clang = 13.0.0 was found.]
| Issue: No available package provides clang==13.0.0 dependency.
Resolution: Ensure that package providing clang==13.0.0 is available and that it is present in the repository. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Error:
Problem: cannot install the best candidate for the job
- nothing provides clang = 13.0.0 needed by clang-rpm-macros-1-136.el115.noarch from https_download_copr_fedorainfracloud_org_results_fedora_llvm_team_clang_rpm_macros_fedora_releasever_basearc | No provider for the clang = 13.0.0 was found. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[Error:
Problem: package libavfilter-free-7.0.2-10.el9.x86_64 from copr_loise_plasma6_runtime requires libtesseract.so.5.3.4()(64bit), but none of the providers can be installed
- cannot install both tesseract-4.1.1-7.el9.x86_64 from appstream and tesseract-5.3.4-6.el9.x86_64 from copr_loise_gears6_25_04_0
- cannot install both tesseract-4.1.1-7.el9.x86_64 from appstream and tesseract-5.3.4-6.el9.x86_64 from copr_loise_plasma6_runtime
- package opencv-text-4.10.0-8.el9.x86_64 from copr_loise_plasma6_runtime requires libtesseract.so.4()(64bit), but none of the providers can be installed
- cannot install both tesseract-4.1.1-7.el9.x86_64 from https_download_rockylinux_org_pub_rocky_9_devel_x86_64_os and tesseract-5.3.4-6.el9.x86_64 from copr_loise_gears6_25_04_0
- cannot install both tesseract-4.1.1-7.el9.x86_64 from https_download_rockylinux_org_pub_rocky_9_devel_x86_64_os and tesseract-5.3.4-6.el9.x86_64 from copr_loise_plasma6_runtime
- package libavfilter-free-devel-7.0.2-10.el9.x86_64 from copr_loise_plasma6_runtime requires libavfilter-free = 7.0.2-10.el9, but none of the providers can be installed
- package libavfilter-free-devel-7.0.2-10.el9.x86_64 from copr_loise_plasma6_runtime requires libavfilter.so.10()(64bit), but none of the providers can be installed
- cannot install the best candidate for the job
- package opencv-devel-4.10.0-8.el9.x86_64 from copr_loise_plasma6_runtime requires libopencv_text.so.410()(64bit), but none of the providers can be installed
- package opencv-devel-4.10.0-8.el9.x86_64 from copr_loise_plasma6_runtime requires opencv-text(x86-64) = 4.10.0-8.el9, but none of the providers can be installed
]: [There are conflicting dependencies for the package]
| Issue: It wasn't possible to resolve the dependency chain as the dependencies collide with each other
Resolution: Resolve dependency chain and check that all of the required versions of each dependency are compatible with each other |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Error:
Problem: package libavfilter-free-7.0.2-10.el9.x86_64 from copr_loise_plasma6_runtime requires libtesseract.so.5.3.4()(64bit), but none of the providers can be installed
- cannot install both tesseract-4.1.1-7.el9.x86_64 from appstream and tesseract-5.3.4-6.el9.x86_64 from copr_loise_gears6_25_04_0
- cannot install both tesseract-4.1.1-7.el9.x86_64 from appstream and tesseract-5.3.4-6.el9.x86_64 from copr_loise_plasma6_runtime
- package opencv-text-4.10.0-8.el9.x86_64 from copr_loise_plasma6_runtime requires libtesseract.so.4()(64bit), but none of the providers can be installed
- cannot install both tesseract-4.1.1-7.el9.x86_64 from https_download_rockylinux_org_pub_rocky_9_devel_x86_64_os and tesseract-5.3.4-6.el9.x86_64 from copr_loise_gears6_25_04_0
- cannot install both tesseract-4.1.1-7.el9.x86_64 from https_download_rockylinux_org_pub_rocky_9_devel_x86_64_os and tesseract-5.3.4-6.el9.x86_64 from copr_loise_plasma6_runtime
- package libavfilter-free-devel-7.0.2-10.el9.x86_64 from copr_loise_plasma6_runtime requires libavfilter-free = 7.0.2-10.el9, but none of the providers can be installed
- package libavfilter-free-devel-7.0.2-10.el9.x86_64 from copr_loise_plasma6_runtime requires libavfilter.so.10()(64bit), but none of the providers can be installed
- cannot install the best candidate for the job
- package opencv-devel-4.10.0-8.el9.x86_64 from copr_loise_plasma6_runtime requires libopencv_text.so.410()(64bit), but none of the providers can be installed
- package opencv-devel-4.10.0-8.el9.x86_64 from copr_loise_plasma6_runtime requires opencv-text(x86-64) = 4.10.0-8.el9, but none of the providers can be installed
| There are conflicting dependencies for the package |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[cp: cannot stat 'nmbl.spec': No such file or directory]: [File `nmbl.spec` couldn't be found at the expected location. Program `cp` couldn't be successfully executed.]
=============
[Traceback (most recent call last):
File "/usr/bin/copr-sources-custom", line 115, in <module>
run_cmd(mock + ['--chroot', 'su - {0} -c {1}'.format(user, cmd)])
~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/bin/copr-sources-custom", line 64, in run_cmd
return subprocess.check_call(command, **kwargs)
~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^
File "/usr/lib64/python3.13/subprocess.py", line 419, in check_call
raise CalledProcessError(retcode, cmd)]: [Traceback from execution of program written in Python. It indicates that a sub-process launched with specific arguments failed. The exception raised is meant to indicate that failure.]
| Issue: File `nmbl.spec` was not at the expected location.
Resolution: Check presence of `nmbl.spec`in the build environment and ensure that it is present at the expected location, or change the expected location to match the actual location of the file. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
cp: cannot stat 'nmbl.spec': No such file or directory | File `nmbl.spec` couldn't be found at the expected location. Program `cp` couldn't be successfully executed. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Traceback (most recent call last):
File "/usr/bin/copr-sources-custom", line 115, in <module>
run_cmd(mock + ['--chroot', 'su - {0} -c {1}'.format(user, cmd)])
~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/bin/copr-sources-custom", line 64, in run_cmd
return subprocess.check_call(command, **kwargs)
~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^
File "/usr/lib64/python3.13/subprocess.py", line 419, in check_call
raise CalledProcessError(retcode, cmd) | Traceback from execution of program written in Python. It indicates that a sub-process launched with specific arguments failed. The exception raised is meant to indicate that failure. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[=================================== FAILURES ===================================
__________________ test_surface_get_set_mime_data_references ___________________
@pytest.mark.skipif(not hasattr(sys, "getrefcount"), reason="PyPy")
def test_surface_get_set_mime_data_references():
surface = cairo.ImageSurface(cairo.FORMAT_RGB24, 1, 1)
v = memoryview(b"bla")
x = v[:1]
recfcount_v = sys.getrefcount(v)
recfcount_x = sys.getrefcount(x)
assert recfcount_v == recfcount_x
> surface.set_mime_data("foo", v)
E SystemError: /builddir/build/BUILD/Python-3.13.0a5/Objects/abstract.c:430: bad argument to internal function
tests/test_api.py:282: SystemError
________________________ test_surface_mime_data_for_pdf ________________________
@pytest.mark.skipif(
sysconfig.get_platform().startswith("win"), reason="msvc fixme")
def test_surface_mime_data_for_pdf():
jpeg_bytes = zlib.decompress(base64.b64decode(
b'eJz7f+P/AwYBLzdPNwZGRkYGDyBk+H+bwRnEowj8P8TAzcHACDJHkOH/EQYRIBsV'
b'cP6/xcDBCBJlrLcHqRBAV8EAVcHIylSPVwGbPQEFjPaK9XDrBAipBSq4CQB9jiS0'
))
file_like = io.BytesIO()
surface = cairo.PDFSurface(file_like, 3, 3)
context = cairo.Context(surface)
image = cairo.ImageSurface(cairo.FORMAT_RGB24, 1, 1)
> image.set_mime_data(cairo.MIME_TYPE_JPEG, jpeg_bytes)
E SystemError: /builddir/build/BUILD/Python-3.13.0a5/Objects/abstract.c:430: bad argument to internal function
tests/test_api.py:308: SystemError
________________________ test_surface_get_set_mime_data ________________________
def test_surface_get_set_mime_data():
surface = cairo.ImageSurface(cairo.FORMAT_RGB24, 1, 1)
assert surface.get_mime_data("foo") is None
assert surface.get_mime_data(cairo.MIME_TYPE_JPEG) is None
> surface.set_mime_data("foo", b"bar")
E SystemError: /builddir/build/BUILD/Python-3.13.0a5/Objects/abstract.c:430: bad argument to internal function
tests/test_surface.py:478: SystemError
=========================== short test summary info ============================
FAILED tests/test_api.py::test_surface_get_set_mime_data_references - SystemE...
FAILED tests/test_api.py::test_surface_mime_data_for_pdf - SystemError: /buil...
FAILED tests/test_surface.py::test_surface_get_set_mime_data - SystemError: /...
=================== 3 failed, 268 passed, 3 skipped in 0.82s ===================]: [it contains traceback from the Python test failures which lead to the failed build]
| Issue: Tests calling set_mime_data on a cairo ImageSurface object failed. The method tries to perform an action that is not possible within the current Python object (bad argument to internal function).
Resolution: Report upstream and wait for the fix |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
=================================== FAILURES ===================================
__________________ test_surface_get_set_mime_data_references ___________________
@pytest.mark.skipif(not hasattr(sys, "getrefcount"), reason="PyPy")
def test_surface_get_set_mime_data_references():
surface = cairo.ImageSurface(cairo.FORMAT_RGB24, 1, 1)
v = memoryview(b"bla")
x = v[:1]
recfcount_v = sys.getrefcount(v)
recfcount_x = sys.getrefcount(x)
assert recfcount_v == recfcount_x
> surface.set_mime_data("foo", v)
E SystemError: /builddir/build/BUILD/Python-3.13.0a5/Objects/abstract.c:430: bad argument to internal function
tests/test_api.py:282: SystemError
________________________ test_surface_mime_data_for_pdf ________________________
@pytest.mark.skipif(
sysconfig.get_platform().startswith("win"), reason="msvc fixme")
def test_surface_mime_data_for_pdf():
jpeg_bytes = zlib.decompress(base64.b64decode(
b'eJz7f+P/AwYBLzdPNwZGRkYGDyBk+H+bwRnEowj8P8TAzcHACDJHkOH/EQYRIBsV'
b'cP6/xcDBCBJlrLcHqRBAV8EAVcHIylSPVwGbPQEFjPaK9XDrBAipBSq4CQB9jiS0'
))
file_like = io.BytesIO()
surface = cairo.PDFSurface(file_like, 3, 3)
context = cairo.Context(surface)
image = cairo.ImageSurface(cairo.FORMAT_RGB24, 1, 1)
> image.set_mime_data(cairo.MIME_TYPE_JPEG, jpeg_bytes)
E SystemError: /builddir/build/BUILD/Python-3.13.0a5/Objects/abstract.c:430: bad argument to internal function
tests/test_api.py:308: SystemError
________________________ test_surface_get_set_mime_data ________________________
def test_surface_get_set_mime_data():
surface = cairo.ImageSurface(cairo.FORMAT_RGB24, 1, 1)
assert surface.get_mime_data("foo") is None
assert surface.get_mime_data(cairo.MIME_TYPE_JPEG) is None
> surface.set_mime_data("foo", b"bar")
E SystemError: /builddir/build/BUILD/Python-3.13.0a5/Objects/abstract.c:430: bad argument to internal function
tests/test_surface.py:478: SystemError
=========================== short test summary info ============================
FAILED tests/test_api.py::test_surface_get_set_mime_data_references - SystemE...
FAILED tests/test_api.py::test_surface_mime_data_for_pdf - SystemError: /buil...
FAILED tests/test_surface.py::test_surface_get_set_mime_data - SystemError: /...
=================== 3 failed, 268 passed, 3 skipped in 0.82s =================== | it contains traceback from the Python test failures which lead to the failed build |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[/builddir/build/BUILD/libjpeg-turbo-1.5.3/rdppm.c:427: undefined reference to `MAX'
collect2: error: ld returned 1 exit status
]: [Shows error from linker that caused the build failure]
=============
[rdppm.c: In function 'start_input_ppm':
rdppm.c:427:51: warning: implicit declaration of function 'MAX' [-Wimplicit-function-declaration]
(size_t)(((long)MAX(maxval, 255) + 1L) *
^~~
]: [This is cause of the error - warning shows that function/macro used here is not defined]
| Issue: Build failed because linker was not able to find required symbol. In this case its missing definition of MAX macro
Resolution: Add definition of required macro, either manually define it or include some header file that contains the definition. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
/builddir/build/BUILD/libjpeg-turbo-1.5.3/rdppm.c:427: undefined reference to `MAX'
collect2: error: ld returned 1 exit status
| Shows error from linker that caused the build failure |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
rdppm.c: In function 'start_input_ppm':
rdppm.c:427:51: warning: implicit declaration of function 'MAX' [-Wimplicit-function-declaration]
(size_t)(((long)MAX(maxval, 255) + 1L) *
^~~
| This is cause of the error - warning shows that function/macro used here is not defined |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[checking for GNU M4 that supports accurate traces... configure: error: no acceptable m4 could be found in $PATH.]: [Check for acceptable GNU M4 macro processor has failed. This is a problem since M4 is used by autoconf.]
=============
[GNU M4 1.4.6 or later is required; 1.4.16 or newer is recommended.
GNU M4 1.4.15 uses a buggy replacement strstr on some systems.
Glibc 2.9 - 2.12 and GNU M4 1.4.11 - 1.4.15 have another strstr bug]: [Reasons are given for why various M4 versions are not acceptable.]
| Issue: The M4 macro processor was present, but the version 1.4.13 is among those considered not acceptable.
Resolution: Ensure that acceptable version of M4 macro processor is present on the build system. Verify dependencies of the package. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
checking for GNU M4 that supports accurate traces... configure: error: no acceptable m4 could be found in $PATH. | Check for acceptable GNU M4 macro processor has failed. This is a problem since M4 is used by autoconf. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
GNU M4 1.4.6 or later is required; 1.4.16 or newer is recommended.
GNU M4 1.4.15 uses a buggy replacement strstr on some systems.
Glibc 2.9 - 2.12 and GNU M4 1.4.11 - 1.4.15 have another strstr bug | Reasons are given for why various M4 versions are not acceptable. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[+ /usr/bin/make -s 'HOSTCFLAGS=-O2 -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z14 -mtune=z15 -fasynchronous-unwind-tables -fstack-clash-protection ' 'HOSTLDFLAGS=-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' ARCH=s390 KCFLAGS= WITH_GCOV=0 -j16 modules
In file included from ./include/linux/module.h:22,
from ./include/kunit/test.h:24,
from mm/kasan/kasan_test_c.c:10:
mm/kasan/kasan_test_c.c:36:18: error: expected ‘,’ or ‘;’ before ‘EXPORTED_FOR_KUNIT_TESTING’
36 | MODULE_IMPORT_NS(EXPORTED_FOR_KUNIT_TESTING);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/moduleparam.h:26:61: note: in definition of macro ‘__MODULE_INFO’
26 | = __MODULE_INFO_PREFIX __stringify(tag) "=" info
| ^~~~
./include/linux/module.h:299:33: note: in expansion of macro ‘MODULE_INFO’
299 | #define MODULE_IMPORT_NS(ns) MODULE_INFO(import_ns, ns)
| ^~~~~~~~~~~
mm/kasan/kasan_test_c.c:36:1: note: in expansion of macro ‘MODULE_IMPORT_NS’
36 | MODULE_IMPORT_NS(EXPORTED_FOR_KUNIT_TESTING);
| ^~~~~~~~~~~~~~~~
make[4]: *** [scripts/Makefile.build:229: mm/kasan/kasan_test_c.o] Error 1
make[3]: *** [scripts/Makefile.build:478: mm/kasan] Error 2
make[2]: *** [scripts/Makefile.build:478: mm] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builddir/build/BUILD/kernel-6.12.0-78.el10/linux-6.12.0-78.el10.s390x/Makefile:1984: .] Error 2
make: *** [Makefile:236: __sub-make] Error 2
+ exit 1
error: Bad exit status from /var/tmp/rpm-tmp.GiGHcq (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.GiGHcq (%build)]: [This snippet has a compilation failure of the kernel.]
| Issue: The mm/kasan/kasan_test_c.c has a syntax error because the EXPORTED_FOR_KUNIT_TESTING should be covered by double quotes.
Resolution: To fix this issue, you need to fix the syntax error by putting EXPORTED_FOR_KUNIT_TESTING under double quotes. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
+ /usr/bin/make -s 'HOSTCFLAGS=-O2 -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z14 -mtune=z15 -fasynchronous-unwind-tables -fstack-clash-protection ' 'HOSTLDFLAGS=-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' ARCH=s390 KCFLAGS= WITH_GCOV=0 -j16 modules
In file included from ./include/linux/module.h:22,
from ./include/kunit/test.h:24,
from mm/kasan/kasan_test_c.c:10:
mm/kasan/kasan_test_c.c:36:18: error: expected ‘,’ or ‘;’ before ‘EXPORTED_FOR_KUNIT_TESTING’
36 | MODULE_IMPORT_NS(EXPORTED_FOR_KUNIT_TESTING);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/moduleparam.h:26:61: note: in definition of macro ‘__MODULE_INFO’
26 | = __MODULE_INFO_PREFIX __stringify(tag) "=" info
| ^~~~
./include/linux/module.h:299:33: note: in expansion of macro ‘MODULE_INFO’
299 | #define MODULE_IMPORT_NS(ns) MODULE_INFO(import_ns, ns)
| ^~~~~~~~~~~
mm/kasan/kasan_test_c.c:36:1: note: in expansion of macro ‘MODULE_IMPORT_NS’
36 | MODULE_IMPORT_NS(EXPORTED_FOR_KUNIT_TESTING);
| ^~~~~~~~~~~~~~~~
make[4]: *** [scripts/Makefile.build:229: mm/kasan/kasan_test_c.o] Error 1
make[3]: *** [scripts/Makefile.build:478: mm/kasan] Error 2
make[2]: *** [scripts/Makefile.build:478: mm] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builddir/build/BUILD/kernel-6.12.0-78.el10/linux-6.12.0-78.el10.s390x/Makefile:1984: .] Error 2
make: *** [Makefile:236: __sub-make] Error 2
+ exit 1
error: Bad exit status from /var/tmp/rpm-tmp.GiGHcq (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.GiGHcq (%build) | This snippet has a compilation failure of the kernel. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[Error:
Problem: package rocm-comgr-16.1-2.fc38.x86_64 from updates requires libLLVM-16.so()(64bit), but none of the providers can be installed
- package rocm-comgr-16.1-2.fc38.x86_64 from updates requires libLLVM-16.so(LLVM_16)(64bit), but none of the providers can be installed
- cannot install both llvm-libs-16.0.0-2.fc38.x86_64 from fedora and llvm-libs-17.0.6-5.fc38.x86_64 from copr_base
- cannot install both llvm-libs-16.0.6-3.fc38.x86_64 from updates and llvm-libs-17.0.6-5.fc38.x86_64 from copr_base
- package rocm-comgr-devel-16.1-2.fc38.x86_64 from updates requires rocm-comgr(x86-64) = 16.1-2.fc38, but none of the providers can be installed
- package llvm-devel-17.0.6-5.fc38.x86_64 from copr_base requires llvm-libs(x86-64) = 17.0.6-5.fc38, but none of the providers can be installed
- cannot install the best candidate for the job]: [The same package 'llvm-libs' are offered by different repositories and are in conflict with one another.]
| Issue: Package has dependencies which can not be successfully resolved.
Resolution: Ensure that all required packages are available and that individual repos don't offer conflicting versions of the same package. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Error:
Problem: package rocm-comgr-16.1-2.fc38.x86_64 from updates requires libLLVM-16.so()(64bit), but none of the providers can be installed
- package rocm-comgr-16.1-2.fc38.x86_64 from updates requires libLLVM-16.so(LLVM_16)(64bit), but none of the providers can be installed
- cannot install both llvm-libs-16.0.0-2.fc38.x86_64 from fedora and llvm-libs-17.0.6-5.fc38.x86_64 from copr_base
- cannot install both llvm-libs-16.0.6-3.fc38.x86_64 from updates and llvm-libs-17.0.6-5.fc38.x86_64 from copr_base
- package rocm-comgr-devel-16.1-2.fc38.x86_64 from updates requires rocm-comgr(x86-64) = 16.1-2.fc38, but none of the providers can be installed
- package llvm-devel-17.0.6-5.fc38.x86_64 from copr_base requires llvm-libs(x86-64) = 17.0.6-5.fc38, but none of the providers can be installed
- cannot install the best candidate for the job | The same package 'llvm-libs' are offered by different repositories and are in conflict with one another. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[error: Bad exit status from /var/tmp/rpm-tmp.kn1qkC (%check)
]: [The build failed in %check section.]
=============
[> raise child_exception_type(errno_num, err_msg, err_filename)
E FileNotFoundError: [Errno 2] No such file or directory: 'git'
/usr/lib64/python3.13/subprocess.py:1966: FileNotFoundError
]: [The command "git" could not be found.]
| Issue: The test suite needs to run `git` command, but the package that provides this command is not installed.
Resolution: You need to add BuildRequires with package that provides this command.
In this case:
```
$ rpm -qf /usr/bin/git
git-core-2.47.1-1.fc41.x86_64
```
You should add to SPEC file:
BuildRequires: git-core |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
error: Bad exit status from /var/tmp/rpm-tmp.kn1qkC (%check)
| The build failed in %check section. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
> raise child_exception_type(errno_num, err_msg, err_filename)
E FileNotFoundError: [Errno 2] No such file or directory: 'git'
/usr/lib64/python3.13/subprocess.py:1966: FileNotFoundError
| The command "git" could not be found. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[Failed to resolve the transaction:
Problem: cannot install both perl-libs-4:5.41.12-518.fc43.x86_64 from copr_base and perl-libs-4:5.40.2-517.fc43.x86_64 from fedora
- package perl-Unicode-LineBreak-2019.001-23.fc42.x86_64 from fedora requires libperl.so.5.40()(64bit), but none of the providers can be installed
- cannot install the best candidate for the job
- conflicting requests
You can try to add to command line:
--no-best to not limit the transaction to the best candidates]: [The error message is saying that dnf5 is not able to install package perl-Unicode-LineBreak which is needed for perl-Term-Table.]
| Issue: The build failed, because dependency 'perl-Unicode-LineBreak' was not built with the perl 5.41.12 which is used in buildroot.
Resolution: perl-Unicode-LineBreak has to be rebuild with new perl 5.41.12 and than can be rebuild perl-Term-Table. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Failed to resolve the transaction:
Problem: cannot install both perl-libs-4:5.41.12-518.fc43.x86_64 from copr_base and perl-libs-4:5.40.2-517.fc43.x86_64 from fedora
- package perl-Unicode-LineBreak-2019.001-23.fc42.x86_64 from fedora requires libperl.so.5.40()(64bit), but none of the providers can be installed
- cannot install the best candidate for the job
- conflicting requests
You can try to add to command line:
--no-best to not limit the transaction to the best candidates | The error message is saying that dnf5 is not able to install package perl-Unicode-LineBreak which is needed for perl-Term-Table. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[Error: building at STEP "RUN rm -rf /etc/my.cnf.d/* && /usr/libexec/container-setup && rpm-file-permissions && /usr/libexec/mysqld -V | grep -qe "{$MYSQL_VERSION}\." && echo "Found VERSION ${MYSQL_VERSION}"": while running runtime: exit status 1
]: [Container build error, showing the precise command that failed]
=============
[{$MYSQL_VERSION}]: [The error - typo in BASH variable
The code contains: {$MYSQL_VERSION}
But it should be: ${MYSQL_VERSION}]
| Issue: The error - typo in BASH variable
The code contains: {$MYSQL_VERSION}
But it should be: ${MYSQL_VERSION}
Resolution: Fix the BASH variable
The code contains: {$MYSQL_VERSION}
But it should be: ${MYSQL_VERSION} |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Error: building at STEP "RUN rm -rf /etc/my.cnf.d/* && /usr/libexec/container-setup && rpm-file-permissions && /usr/libexec/mysqld -V | grep -qe "{$MYSQL_VERSION}\." && echo "Found VERSION ${MYSQL_VERSION}"": while running runtime: exit status 1
| Container build error, showing the precise command that failed |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
{$MYSQL_VERSION} | The error - typo in BASH variable
The code contains: {$MYSQL_VERSION}
But it should be: ${MYSQL_VERSION} |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[error: Unknown rich dependency op '(setq': (while (setq filename (read-from-minibuffer "")) (when (string-match-p "\\.el\\(\\.gz\\)?$" filename) (with-temp-buffer (insert-file-contents filename) (setq parsers nil) (while (search-forward-regexp "(treesit-\\(parser-create\\|ready-p\\) '" nil t) (add-to-list 'parsers (thing-at-point 'symbol t))) (when parsers (princ (concat ";" filename "\n")) (dolist (parser parsers) (princ (concat "tree-sitter(" parser ")" "\n")))))))
error: Unknown rich dependency op 'nil': (condition-case nil (while (setq filename (read-from-minibuffer "")) (when (string-match-p "\\.el\\(\\.gz\\)?$" filename) (with-temp-buffer (insert-file-contents filename) (setq parsers nil) (while (search-forward-regexp "(treesit-\\(parser-create\\|ready-p\\) '" nil t) (add-to-list 'parsers (thing-at-point 'symbol t))) (when parsers (princ (concat ";" filename "\n")) (dolist (parser parsers) (princ (concat "tree-sitter(" parser ")" "\n"))))))) (end-of-file nil))
error: Unknown rich dependency op '(setq': (while (setq filename (read-from-minibuffer "")) (when (string-match-p "\\.el\\(\\.gz\\)?$" filename) (with-temp-buffer (insert-file-contents filename) (setq parsers nil) (while (search-forward-regexp "(treesit-\\(parser-create\\|ready-p\\) '" nil t) (add-to-list 'parsers (thing-at-point 'symbol t))) (when parsers (princ (concat ";" filename "\n")) (dolist (parser parsers) (princ (concat "tree-sitter(" parser ")" "\n"))))))) (end-of-file nil)) t)
error: Dependency tokens must begin with alpha-numeric, '_' or '/': #<subr F616e6f6e796d6f75732d6c616d626461_anonymous_lambda_102>(#<buffer *load*> "/usr/lib/rpm/emacs_lisp.rec")
error: Dependency tokens must begin with alpha-numeric, '_' or '/': "/usr/lib/rpm/emacs_lisp.rec" nil t #<subr F616e6f6e796d6f75732d6c616d626461_anonymous_lambda_102>)
error: Dependency tokens must begin with alpha-numeric, '_' or '/': "/usr/lib/rpm/emacs_lisp.rec"))
]: [Build fails during dependency generating step when writing the resulting binary rpms.]
| Issue: Script generating the dependency information for the resulting binary rpms produces out that is not considered valid by the rpm tool.
Resolution: The dependency generating script needs to be fixed. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
error: Unknown rich dependency op '(setq': (while (setq filename (read-from-minibuffer "")) (when (string-match-p "\\.el\\(\\.gz\\)?$" filename) (with-temp-buffer (insert-file-contents filename) (setq parsers nil) (while (search-forward-regexp "(treesit-\\(parser-create\\|ready-p\\) '" nil t) (add-to-list 'parsers (thing-at-point 'symbol t))) (when parsers (princ (concat ";" filename "\n")) (dolist (parser parsers) (princ (concat "tree-sitter(" parser ")" "\n")))))))
error: Unknown rich dependency op 'nil': (condition-case nil (while (setq filename (read-from-minibuffer "")) (when (string-match-p "\\.el\\(\\.gz\\)?$" filename) (with-temp-buffer (insert-file-contents filename) (setq parsers nil) (while (search-forward-regexp "(treesit-\\(parser-create\\|ready-p\\) '" nil t) (add-to-list 'parsers (thing-at-point 'symbol t))) (when parsers (princ (concat ";" filename "\n")) (dolist (parser parsers) (princ (concat "tree-sitter(" parser ")" "\n"))))))) (end-of-file nil))
error: Unknown rich dependency op '(setq': (while (setq filename (read-from-minibuffer "")) (when (string-match-p "\\.el\\(\\.gz\\)?$" filename) (with-temp-buffer (insert-file-contents filename) (setq parsers nil) (while (search-forward-regexp "(treesit-\\(parser-create\\|ready-p\\) '" nil t) (add-to-list 'parsers (thing-at-point 'symbol t))) (when parsers (princ (concat ";" filename "\n")) (dolist (parser parsers) (princ (concat "tree-sitter(" parser ")" "\n"))))))) (end-of-file nil)) t)
error: Dependency tokens must begin with alpha-numeric, '_' or '/': #<subr F616e6f6e796d6f75732d6c616d626461_anonymous_lambda_102>(#<buffer *load*> "/usr/lib/rpm/emacs_lisp.rec")
error: Dependency tokens must begin with alpha-numeric, '_' or '/': "/usr/lib/rpm/emacs_lisp.rec" nil t #<subr F616e6f6e796d6f75732d6c616d626461_anonymous_lambda_102>)
error: Dependency tokens must begin with alpha-numeric, '_' or '/': "/usr/lib/rpm/emacs_lisp.rec"))
| Build fails during dependency generating step when writing the resulting binary rpms. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[src/user.c:145:54: error: passing argument 2 of âload_entryâ from incompatible pointer type [-Wincompatible-pointer-types]
145 | e = load_entry(file, log_error, pw, envp);
| ^~~~~~~~~
| |
| void (*)(const char *)
src/funcs.h:92:37: note: expected âvoid (*)(void)â but argument is of type âvoid (*)(const char *)â
92 | entry *load_entry(FILE *, void (*)(), struct passwd *, char **);
| ^~~~~~~~~~
make[1]: *** [Makefile:747: src/user.o] Error 1]: [The error message indicates a type mismatch in the load_entry function call. This function expects a pointer to a function that takes no arguments (void pointer), but you're providing a pointer to a function that takes a const char * argument (a pointer to a constant character string).]
| Issue: The build failure is primarily due to the use of deprecated security_context_t functions. This indicates that the cronie package is attempting to use older SELinux APIs that are no longer recommended.
Resolution: Additional Considerations
Security Implications: Using deprecated APIs can introduce security vulnerabilities. It's essential to assess the risks associated with the specific use case and take appropriate measures to mitigate them.
SELinux Configuration: Ensure that your SELinux policy is configured correctly to allow the necessary permissions for the cronie service. Incorrect SELinux policies can lead to unexpected behavior and security issues.
Build Environment Consistency: Verify that your build environment is configured correctly and that all necessary dependencies are installed. Inconsistent build environments can cause unexpected build failures. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
src/user.c:145:54: error: passing argument 2 of âload_entryâ from incompatible pointer type [-Wincompatible-pointer-types]
145 | e = load_entry(file, log_error, pw, envp);
| ^~~~~~~~~
| |
| void (*)(const char *)
src/funcs.h:92:37: note: expected âvoid (*)(void)â but argument is of type âvoid (*)(const char *)â
92 | entry *load_entry(FILE *, void (*)(), struct passwd *, char **);
| ^~~~~~~~~~
make[1]: *** [Makefile:747: src/user.o] Error 1 | The error message indicates a type mismatch in the load_entry function call. This function expects a pointer to a function that takes no arguments (void pointer), but you're providing a pointer to a function that takes a const char * argument (a pointer to a constant character string). |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[configure: error: unrecognized option: '--loglevel=debug'
Try './configure --help' for more information
]: [rpm build fails in prep section running configure script]
| Issue: Configure script does not recognize used option
Resolution: Check for typo in the unrecognized option and whether current version supports it. It may have been replaced or dropped. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
configure: error: unrecognized option: '--loglevel=debug'
Try './configure --help' for more information
| rpm build fails in prep section running configure script |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[Problem: cannot install the best candidate for the job
- nothing provides python(abi) = 3.12 needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(cleo) < 3~~ with python3.12dist(cleo) >= 2.1) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides python3.12dist(packaging) >= 23.1 needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(requests-toolbelt) < 2~~ with python3.12dist(requests-toolbelt) >= 1) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(build) < 2~~ with python3.12dist(build) >= 1.0.3) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(cachecontrol) < 0.15~~ with python3.12dist(cachecontrol) >= 0.14) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(cachecontrol[filecache]) < 0.15~~ with python3.12dist(cachecontrol[filecache]) >= 0.14) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(crashtest) < 0.5~~ with python3.12dist(crashtest) >= 0.4.1) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(dulwich) < 0.22~~ with python3.12dist(dulwich) >= 0.21.2) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(fastjsonschema) < 3~~ with python3.12dist(fastjsonschema) >= 2.18) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(installer) < 0.8~~ with python3.12dist(installer) >= 0.7) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(pexpect) < 5~~ with python3.12dist(pexpect) >= 4.7) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(pkginfo) < 2~~ with python3.12dist(pkginfo) >= 1.10) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(pyproject-hooks) < 2~~ with python3.12dist(pyproject-hooks) >= 1) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(tomlkit) < 1~~ with python3.12dist(tomlkit) >= 0.11.4) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides python3.12dist(poetry-core) = 1.9 needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides python3.12dist(trove-classifiers) >= 2022.5.19 needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base]: [Multiple required python packages are not available at their requested versions. Leading to failure of build.]
=============
[Copr build error: Build failed]: [General COPR build failure message, it doesn't provide any useful information beyond that.]
| Issue: Several constraints on package versions were impossible to satisfy.
Resolution: Loosen constraints on dependencies, or ensure that required packages are all available during build. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Problem: cannot install the best candidate for the job
- nothing provides python(abi) = 3.12 needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(cleo) < 3~~ with python3.12dist(cleo) >= 2.1) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides python3.12dist(packaging) >= 23.1 needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(requests-toolbelt) < 2~~ with python3.12dist(requests-toolbelt) >= 1) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(build) < 2~~ with python3.12dist(build) >= 1.0.3) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(cachecontrol) < 0.15~~ with python3.12dist(cachecontrol) >= 0.14) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(cachecontrol[filecache]) < 0.15~~ with python3.12dist(cachecontrol[filecache]) >= 0.14) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(crashtest) < 0.5~~ with python3.12dist(crashtest) >= 0.4.1) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(dulwich) < 0.22~~ with python3.12dist(dulwich) >= 0.21.2) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(fastjsonschema) < 3~~ with python3.12dist(fastjsonschema) >= 2.18) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(installer) < 0.8~~ with python3.12dist(installer) >= 0.7) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(pexpect) < 5~~ with python3.12dist(pexpect) >= 4.7) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(pkginfo) < 2~~ with python3.12dist(pkginfo) >= 1.10) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(pyproject-hooks) < 2~~ with python3.12dist(pyproject-hooks) >= 1) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides (python3.12dist(tomlkit) < 1~~ with python3.12dist(tomlkit) >= 0.11.4) needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides python3.12dist(poetry-core) = 1.9 needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base
- nothing provides python3.12dist(trove-classifiers) >= 2022.5.19 needed by python3-poetry-1.8.3-1.fc41.noarch from copr_base | Multiple required python packages are not available at their requested versions. Leading to failure of build. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Copr build error: Build failed | General COPR build failure message, it doesn't provide any useful information beyond that. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[FAILED: src/basic/libbasic.a.p/mountpoint-util.c.o
gcc -Isrc/basic/libbasic.a.p -Isrc/basic -I../src/basic -Isrc/fundamental -I../src/fundamental -Isrc/systemd -I../src/systemd -I. -I.. -fdiagnostics-color=always -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Wextra -Werror -std=gnu17 -Wno-missing-field-initializers -Wno-unused-parameter -Wno-nonnull-compare -Warray-bounds -Warray-bounds=2 -Wdate-time -Wendif-labels -Werror=bool-compare -Werror=discarded-qualifiers -Werror=flex-array-member-not-at-end -Werror=format=2 -Werror=format-signedness -Werror=implicit-function-declaration -Werror=implicit-int -Werror=incompatible-pointer-types -Werror=int-conversion -Werror=missing-declarations -Werror=missing-prototypes -Werror=overflow -Werror=override-init -Werror=pointer-sign -Werror=return-type -Werror=shift-count-overflow -Werror=shift-overflow=2 -Werror=strict-flex-arrays -Werror=undef -Wfloat-equal -Wimplicit-fallthrough=5 -Winit-self -Wlogical-op -Wmissing-include-dirs -Wmissing-noreturn -Wnested-externs -Wold-style-definition -Wpointer-arith -Wredundant-decls -Wshadow -Wstrict-aliasing=2 -Wstrict-prototypes -Wsuggest-attribute=noreturn -Wunterminated-string-initialization -Wunused-function -Wwrite-strings -Wzero-as-null-pointer-constant -Wzero-length-bounds -fdiagnostics-show-option -fno-common -fstack-protector -fstack-protector-strong -fstrict-flex-arrays=3 --param=ssp-buffer-size=4 -Wno-maybe-uninitialized -Wno-unused-result -ftrivial-auto-var-init=zero -Werror=shadow -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -fno-strict-aliasing -fstrict-flex-arrays=1 -fvisibility=hidden -ffunction-sections -fdata-sections -include config.h -pthread -isystem../src/basic/include -fvisibility=default -MD -MQ src/basic/libbasic.a.p/mountpoint-util.c.o -MF src/basic/libbasic.a.p/mountpoint-util.c.o.d -o src/basic/libbasic.a.p/mountpoint-util.c.o -c ../src/basic/mountpoint-util.c
../src/basic/mountpoint-util.c: In function âfd_fdinfo_mnt_idâ:
../src/basic/mountpoint-util.c:167:26: error: âpâ undeclared (first use in this function)
167 | return safe_atoi(p, ret_mnt_id);
| ^
../src/basic/mountpoint-util.c:167:26: note: each undeclared identifier is reported only once for each function it appears in]: [Build failed during code compilation with undeclared variable `p`.]
| Issue: Build failed due to a compilation error where the compiler detected an undeclared variable used in the function call.
Resolution: Fix the code by checking the function `safe_atoi` and declaring the required variables. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
FAILED: src/basic/libbasic.a.p/mountpoint-util.c.o
gcc -Isrc/basic/libbasic.a.p -Isrc/basic -I../src/basic -Isrc/fundamental -I../src/fundamental -Isrc/systemd -I../src/systemd -I. -I.. -fdiagnostics-color=always -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Wextra -Werror -std=gnu17 -Wno-missing-field-initializers -Wno-unused-parameter -Wno-nonnull-compare -Warray-bounds -Warray-bounds=2 -Wdate-time -Wendif-labels -Werror=bool-compare -Werror=discarded-qualifiers -Werror=flex-array-member-not-at-end -Werror=format=2 -Werror=format-signedness -Werror=implicit-function-declaration -Werror=implicit-int -Werror=incompatible-pointer-types -Werror=int-conversion -Werror=missing-declarations -Werror=missing-prototypes -Werror=overflow -Werror=override-init -Werror=pointer-sign -Werror=return-type -Werror=shift-count-overflow -Werror=shift-overflow=2 -Werror=strict-flex-arrays -Werror=undef -Wfloat-equal -Wimplicit-fallthrough=5 -Winit-self -Wlogical-op -Wmissing-include-dirs -Wmissing-noreturn -Wnested-externs -Wold-style-definition -Wpointer-arith -Wredundant-decls -Wshadow -Wstrict-aliasing=2 -Wstrict-prototypes -Wsuggest-attribute=noreturn -Wunterminated-string-initialization -Wunused-function -Wwrite-strings -Wzero-as-null-pointer-constant -Wzero-length-bounds -fdiagnostics-show-option -fno-common -fstack-protector -fstack-protector-strong -fstrict-flex-arrays=3 --param=ssp-buffer-size=4 -Wno-maybe-uninitialized -Wno-unused-result -ftrivial-auto-var-init=zero -Werror=shadow -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fPIC -fno-strict-aliasing -fstrict-flex-arrays=1 -fvisibility=hidden -ffunction-sections -fdata-sections -include config.h -pthread -isystem../src/basic/include -fvisibility=default -MD -MQ src/basic/libbasic.a.p/mountpoint-util.c.o -MF src/basic/libbasic.a.p/mountpoint-util.c.o.d -o src/basic/libbasic.a.p/mountpoint-util.c.o -c ../src/basic/mountpoint-util.c
../src/basic/mountpoint-util.c: In function âfd_fdinfo_mnt_idâ:
../src/basic/mountpoint-util.c:167:26: error: âpâ undeclared (first use in this function)
167 | return safe_atoi(p, ret_mnt_id);
| ^
../src/basic/mountpoint-util.c:167:26: note: each undeclared identifier is reported only once for each function it appears in | Build failed during code compilation with undeclared variable `p`. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[Problem: cannot install both python3-packaging-24.2-3.fc42.noarch from fedora and python3-packaging-25.0-1.fc43.noarch from @System
- cannot install the best candidate for the job
- conflicting requests]: [The snippet shows the conflicting requirements.]
| Issue: The build requirements cannot be satisfied because there is a conflict between them.
Resolution: Find the source of the conflict and fix it. It'll probably require removing a version limit from one of the requirements. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Problem: cannot install both python3-packaging-24.2-3.fc42.noarch from fedora and python3-packaging-25.0-1.fc43.noarch from @System
- cannot install the best candidate for the job
- conflicting requests | The snippet shows the conflicting requirements. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[Failed to resolve the transaction:]: [The error type]
=============
[No match for argument: python3-mrtparse]: [The name of the missing package]
| Issue: A package is missing in Fedora to build this one.
Resolution: You need to package the missing dependency first. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Failed to resolve the transaction: | The error type |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
No match for argument: python3-mrtparse | The name of the missing package |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[already borrowed: BorrowMutError
stack backtrace:
0: 0x7fff8f5d0de8 - <std::sys::backtrace::BacktraceLock::print::DisplayBacktrace as core::fmt::Display>::fmt::h358da5a7e33a66e2
1: 0x7fff8ed5b838 - core::fmt::write::h6bc2db31dd03e7df
2: 0x7fff8f5bec44 - <unknown>
3: 0x7fff8f5d0be4 - <unknown>
4: 0x7fff8f5d41a4 - <unknown>
5: 0x7fff8f5d3b50 - std::panicking::default_hook::hc8100c38be18401f
6: 0x7fff8c1a0b6c - <unknown>
7: 0x7fff8c171530 - <unknown>
8: 0x7fff8f5d50a8 - std::panicking::rust_panic_with_hook::hb454b0dcbf5fc939
9: 0x7fff8f5d4b38 - <unknown>
10: 0x7fff8f5d14b0 - std::sys::backtrace::__rust_end_short_backtrace::h03d44392342f1184
11: 0x7fff8f5d4584 - __rustc[c2610c6383308acc]::rust_begin_unwind
12: 0x7fff8b9b9414 - core::panicking::panic_fmt::hf33b6b3da6dfe6bc
13: 0x7fff8b9b9278 - core::cell::panic_already_borrowed::h59a581a7b2415564
14: 0x7fff8d97f280 - <rustc_borrowck[ff17395deed2ec8e]::type_check::TypeChecker as rustc_middle[687e2f65837ea9de]::mir::visit::Visitor>::visit_body
15: 0x7fff8d8e3f5c - <unknown>
16: 0x7fff8d8adac0 - <unknown>
17: 0x7fff8d9dbf10 - <unknown>
18: 0x7fff8e92d7a8 - <unknown>
19: 0x7fff8e8c9adc - rustc_query_system[9f00eb678419a2a2]::query::plumbing::try_execute_query::<rustc_query_impl[4578bb995ede35ef]::DynamicConfig<rustc_data_structures[7e0816562978da6d]::vec_cache::VecCache<rustc_span[c8935130265359c6]::def_id::LocalDefId, rustc_middle[687e2f65837ea9de]::query::erase::Erased<[u8; 8usize]>, rustc_query_system[9f00eb678419a2a2]::dep_graph::graph::DepNodeIndex>, false, false, false>, rustc_query_impl[4578bb995ede35ef]::plumbing::QueryCtxt, false>
20: 0x7fff8e950d04 - <unknown>
21: 0x7fff8e0a7690 - <unknown>
22: 0x7fff8f11feac - rustc_interface[537fa850fc24b132]::passes::analysis
23: 0x7fff8f3bf39c - <unknown>
24: 0x7fff8f30d844 - rustc_query_system[9f00eb678419a2a2]::query::plumbing::try_execute_query::<rustc_query_impl[4578bb995ede35ef]::DynamicConfig<rustc_query_system[9f00eb678419a2a2]::query::caches::SingleCache<rustc_middle[687e2f65837ea9de]::query::erase::Erased<[u8; 0usize]>>, false, false, false>, rustc_query_impl[4578bb995ede35ef]::plumbing::QueryCtxt, false>
25: 0x7fff8f3c6238 - <unknown>
26: 0x7fff8efb43ac - <unknown>
27: 0x7fff8efb0594 - <unknown>
28: 0x7fff8efac588 - std[8587342a5b72dfb4]::sys::backtrace::__rust_begin_short_backtrace::<rustc_interface[537fa850fc24b132]::util::run_in_thread_with_globals<rustc_interface[537fa850fc24b132]::util::run_in_thread_pool_with_globals<rustc_interface[537fa850fc24b132]::interface::run_compiler<(), rustc_driver_impl[d9b811d677f6ce88]::run_compiler::{closure#0}>::{closure#1}, ()>::{closure#0}, ()>::{closure#0}::{closure#0}, ()>
29: 0x7fff8efb7c54 - <unknown>
30: 0x7fff8f5dc5c8 - <unknown>
31: 0x7fff8aeb693c - start_thread
32: 0x7fff8af63908 - __clone3
error: the compiler unexpectedly panicked. this is a bug.]: [Compile issue]
=============
[note: we would appreciate a bug report: https://github.com/rust-lang/rust/issues/new?labels=C-bug%2C+I-ICE%2C+T-compiler&template=ice.md]: [Description of how to notify upstream]
| Issue: Compiler panicked and couldn't handle the issue, tried to use memory which wasn't free
Resolution: Report the issue to upstream as describe in snippet 2 |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
already borrowed: BorrowMutError
stack backtrace:
0: 0x7fff8f5d0de8 - <std::sys::backtrace::BacktraceLock::print::DisplayBacktrace as core::fmt::Display>::fmt::h358da5a7e33a66e2
1: 0x7fff8ed5b838 - core::fmt::write::h6bc2db31dd03e7df
2: 0x7fff8f5bec44 - <unknown>
3: 0x7fff8f5d0be4 - <unknown>
4: 0x7fff8f5d41a4 - <unknown>
5: 0x7fff8f5d3b50 - std::panicking::default_hook::hc8100c38be18401f
6: 0x7fff8c1a0b6c - <unknown>
7: 0x7fff8c171530 - <unknown>
8: 0x7fff8f5d50a8 - std::panicking::rust_panic_with_hook::hb454b0dcbf5fc939
9: 0x7fff8f5d4b38 - <unknown>
10: 0x7fff8f5d14b0 - std::sys::backtrace::__rust_end_short_backtrace::h03d44392342f1184
11: 0x7fff8f5d4584 - __rustc[c2610c6383308acc]::rust_begin_unwind
12: 0x7fff8b9b9414 - core::panicking::panic_fmt::hf33b6b3da6dfe6bc
13: 0x7fff8b9b9278 - core::cell::panic_already_borrowed::h59a581a7b2415564
14: 0x7fff8d97f280 - <rustc_borrowck[ff17395deed2ec8e]::type_check::TypeChecker as rustc_middle[687e2f65837ea9de]::mir::visit::Visitor>::visit_body
15: 0x7fff8d8e3f5c - <unknown>
16: 0x7fff8d8adac0 - <unknown>
17: 0x7fff8d9dbf10 - <unknown>
18: 0x7fff8e92d7a8 - <unknown>
19: 0x7fff8e8c9adc - rustc_query_system[9f00eb678419a2a2]::query::plumbing::try_execute_query::<rustc_query_impl[4578bb995ede35ef]::DynamicConfig<rustc_data_structures[7e0816562978da6d]::vec_cache::VecCache<rustc_span[c8935130265359c6]::def_id::LocalDefId, rustc_middle[687e2f65837ea9de]::query::erase::Erased<[u8; 8usize]>, rustc_query_system[9f00eb678419a2a2]::dep_graph::graph::DepNodeIndex>, false, false, false>, rustc_query_impl[4578bb995ede35ef]::plumbing::QueryCtxt, false>
20: 0x7fff8e950d04 - <unknown>
21: 0x7fff8e0a7690 - <unknown>
22: 0x7fff8f11feac - rustc_interface[537fa850fc24b132]::passes::analysis
23: 0x7fff8f3bf39c - <unknown>
24: 0x7fff8f30d844 - rustc_query_system[9f00eb678419a2a2]::query::plumbing::try_execute_query::<rustc_query_impl[4578bb995ede35ef]::DynamicConfig<rustc_query_system[9f00eb678419a2a2]::query::caches::SingleCache<rustc_middle[687e2f65837ea9de]::query::erase::Erased<[u8; 0usize]>>, false, false, false>, rustc_query_impl[4578bb995ede35ef]::plumbing::QueryCtxt, false>
25: 0x7fff8f3c6238 - <unknown>
26: 0x7fff8efb43ac - <unknown>
27: 0x7fff8efb0594 - <unknown>
28: 0x7fff8efac588 - std[8587342a5b72dfb4]::sys::backtrace::__rust_begin_short_backtrace::<rustc_interface[537fa850fc24b132]::util::run_in_thread_with_globals<rustc_interface[537fa850fc24b132]::util::run_in_thread_pool_with_globals<rustc_interface[537fa850fc24b132]::interface::run_compiler<(), rustc_driver_impl[d9b811d677f6ce88]::run_compiler::{closure#0}>::{closure#1}, ()>::{closure#0}, ()>::{closure#0}::{closure#0}, ()>
29: 0x7fff8efb7c54 - <unknown>
30: 0x7fff8f5dc5c8 - <unknown>
31: 0x7fff8aeb693c - start_thread
32: 0x7fff8af63908 - __clone3
error: the compiler unexpectedly panicked. this is a bug. | Compile issue |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
note: we would appreciate a bug report: https://github.com/rust-lang/rust/issues/new?labels=C-bug%2C+I-ICE%2C+T-compiler&template=ice.md | Description of how to notify upstream |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[DEBUG util.py:459: Failed to resolve the transaction:
DEBUG util.py:459: No match for argument: gimp-devel-tools
DEBUG util.py:459: No match for argument: pkgconfig(gimp-3.0) >= 3.0]: [This lists packages (build dependencies) which couldn't be installed]
| Issue: Some packages which are build dependencies couldn't be installed, and therefore the source code couldn't be built.
Resolution: Look at the listed packages (in this case gimp-devel-tools and any packages that matches "pkgconfig(gimp-3.0) >= 3.0") and figure out why they can't be installed. They might be missing in the repository (perhaps just for some specific architecture). Or there can be a network failure which caused some repository to be unavailable. If this is not a temporary issue, you either need to drop the build dependencies (if the source code can be built without them), replace them with a compatible library (if available), or add the missing dependencies to the repository. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
DEBUG util.py:459: Failed to resolve the transaction:
DEBUG util.py:459: No match for argument: gimp-devel-tools
DEBUG util.py:459: No match for argument: pkgconfig(gimp-3.0) >= 3.0 | This lists packages (build dependencies) which couldn't be installed |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[Problem: nothing provides requested (python3dist(setuptools) >= 70 with python3dist(setuptools) < 70.1)
]: [The part "(python3dist(setuptools) >= 70 with python3dist(setuptools) < 70.1)" specifies a very specific version range for the setuptools package. It requires a version that is at least 70.0.0 but strictly less than 70.1.0.]
| Issue: The error message you're seeing, "nothing provides requested (python3dist(setuptools) >= 70 with python3dist(setuptools) < 70.1)," indicates a dependency conflict within your Python project. Therefore the RPM build failed as the build requires can't be satisfied.
Resolution: Update the dependency constraint to the one available in the distribution and make sure the software works well with it. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Problem: nothing provides requested (python3dist(setuptools) >= 70 with python3dist(setuptools) < 70.1)
| The part "(python3dist(setuptools) >= 70 with python3dist(setuptools) < 70.1)" specifies a very specific version range for the setuptools package. It requires a version that is at least 70.0.0 but strictly less than 70.1.0. |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[Start: installing minimal buildroot with dnf
execv(/usr/bin/dnf-3) failed: No such file or directory
WARNING: DNF command failed, retrying, attempt #2, sleeping 10s
execv(/usr/bin/dnf-3) failed: No such file or directory
WARNING: DNF command failed, retrying, attempt #3, sleeping 10s
execv(/usr/bin/dnf-3) failed: No such file or directory
ERROR: Exception(/var/lib/copr-rpmbuild/workspace/workdir-hbejbezy/podman/podman.spec) Config(fedora-eln-x86_64) 0 minutes 28 seconds
INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results
INFO: Cleaning up build root ('cleanup_on_failure=True')
Start: clean chroot
INFO: unmounting tmpfs.
Finish: clean chroot
ERROR: Command failed:
# /usr/bin/systemd-nspawn -q -M b69abec0d8344b1bb43241e024e31b9b -D /var/lib/mock/fedora-eln-x86_64-bootstrap-1715332529.126011/root -a --capability=cap_ipc_lock --rlimit=RLIMIT_NOFILE=10240 --capability=cap_ipc_lock --bind=/tmp/mock-resolv.1ulmbs34:/etc/resolv.conf --console=pipe --setenv=TERM=vt100 --setenv=SHELL=/bin/bash --setenv=HOME=/var/lib/mock/fedora-eln-x86_64-1715332529.126011/root/installation-homedir --setenv=HOSTNAME=mock --setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin '--setenv=PROMPT_COMMAND=printf "\033]0;<mock-chroot>\007"' '--setenv=PS1=<mock-chroot> \s-\v\$ ' --setenv=LANG=C.UTF-8 --setenv=LC_MESSAGES=C.UTF-8 --setenv=SYSTEMD_NSPAWN_TMPFS_TMP=0 --setenv=SYSTEMD_SECCOMP=0 --resolv-conf=off /usr/bin/dnf-3 --installroot /var/lib/mock/fedora-eln-x86_64-1715332529.126011/root/ --releasever eln --setopt=deltarpm=False --setopt=allow_vendor_change=yes --allowerasing --disableplugin=local --disableplugin=spacewalk --disableplugin=versionlock install bash bzip2 coreutils cpio diffutils fedora-release-eln findutils gawk glibc-minimal-langpack grep gzip info patch redhat-rpm-config rpm-build sed tar unzip util-linux which xz --setopt=tsflags=nocontexts --setopt=tsflags=nocontexts --setopt=tsflags=nocontexts
execv(/usr/bin/dnf-3) failed: No such file or directory]: [```
Start: installing minimal buildroot with dnf
execv(/usr/bin/dnf-3) failed: No such file or directory
WARNING: DNF command failed, retrying, attempt #2, sleeping 10s
execv(/usr/bin/dnf-3) failed: No such file or directory
WARNING: DNF command failed, retrying, attempt #3, sleeping 10s
execv(/usr/bin/dnf-3) failed: No such file or directory
ERROR: Exception(/var/lib/copr-rpmbuild/workspace/workdir-hbejbezy/podman/podman.spec) Config(fedora-eln-x86_64) 0 minutes 28 seconds
INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results
INFO: Cleaning up build root ('cleanup_on_failure=True')
Start: clean chroot
INFO: unmounting tmpfs.
Finish: clean chroot
ERROR: Command failed:
# /usr/bin/systemd-nspawn -q -M b69abec0d8344b1bb43241e024e31b9b -D /var/lib/mock/fedora-eln-x86_64-bootstrap-1715332529.126011/root -a --capability=cap_ipc_lock --rlimit=RLIMIT_NOFILE=10240 --capability=cap_ipc_lock --bind=/tmp/mock-resolv.1ulmbs34:/etc/resolv.conf --console=pipe --setenv=TERM=vt100 --setenv=SHELL=/bin/bash --setenv=HOME=/var/lib/mock/fedora-eln-x86_64-1715332529.126011/root/installation-homedir --setenv=HOSTNAME=mock --setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin '--setenv=PROMPT_COMMAND=printf "\033]0;<mock-chroot>\007"' '--setenv=PS1=<mock-chroot> \s-\v\$ ' --setenv=LANG=C.UTF-8 --setenv=LC_MESSAGES=C.UTF-8 --setenv=SYSTEMD_NSPAWN_TMPFS_TMP=0 --setenv=SYSTEMD_SECCOMP=0 --resolv-conf=off /usr/bin/dnf-3 --installroot /var/lib/mock/fedora-eln-x86_64-1715332529.126011/root/ --releasever eln --setopt=deltarpm=False --setopt=allow_vendor_change=yes --allowerasing --disableplugin=local --disableplugin=spacewalk --disableplugin=versionlock install bash bzip2 coreutils cpio diffutils fedora-release-eln findutils gawk glibc-minimal-langpack grep gzip info patch redhat-rpm-config rpm-build sed tar unzip util-linux which xz --setopt=tsflags=nocontexts --setopt=tsflags=nocontexts --setopt=tsflags=nocontexts
execv(/usr/bin/dnf-3) failed: No such file or directory
```]
| Issue: Build failed because the buildroot is expecting /usr/bin/dnf-3
Resolution: Don't know yet. I have reported it to the ELN matrix room. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
Start: installing minimal buildroot with dnf
execv(/usr/bin/dnf-3) failed: No such file or directory
WARNING: DNF command failed, retrying, attempt #2, sleeping 10s
execv(/usr/bin/dnf-3) failed: No such file or directory
WARNING: DNF command failed, retrying, attempt #3, sleeping 10s
execv(/usr/bin/dnf-3) failed: No such file or directory
ERROR: Exception(/var/lib/copr-rpmbuild/workspace/workdir-hbejbezy/podman/podman.spec) Config(fedora-eln-x86_64) 0 minutes 28 seconds
INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results
INFO: Cleaning up build root ('cleanup_on_failure=True')
Start: clean chroot
INFO: unmounting tmpfs.
Finish: clean chroot
ERROR: Command failed:
# /usr/bin/systemd-nspawn -q -M b69abec0d8344b1bb43241e024e31b9b -D /var/lib/mock/fedora-eln-x86_64-bootstrap-1715332529.126011/root -a --capability=cap_ipc_lock --rlimit=RLIMIT_NOFILE=10240 --capability=cap_ipc_lock --bind=/tmp/mock-resolv.1ulmbs34:/etc/resolv.conf --console=pipe --setenv=TERM=vt100 --setenv=SHELL=/bin/bash --setenv=HOME=/var/lib/mock/fedora-eln-x86_64-1715332529.126011/root/installation-homedir --setenv=HOSTNAME=mock --setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin '--setenv=PROMPT_COMMAND=printf "\033]0;<mock-chroot>\007"' '--setenv=PS1=<mock-chroot> \s-\v\$ ' --setenv=LANG=C.UTF-8 --setenv=LC_MESSAGES=C.UTF-8 --setenv=SYSTEMD_NSPAWN_TMPFS_TMP=0 --setenv=SYSTEMD_SECCOMP=0 --resolv-conf=off /usr/bin/dnf-3 --installroot /var/lib/mock/fedora-eln-x86_64-1715332529.126011/root/ --releasever eln --setopt=deltarpm=False --setopt=allow_vendor_change=yes --allowerasing --disableplugin=local --disableplugin=spacewalk --disableplugin=versionlock install bash bzip2 coreutils cpio diffutils fedora-release-eln findutils gawk glibc-minimal-langpack grep gzip info patch redhat-rpm-config rpm-build sed tar unzip util-linux which xz --setopt=tsflags=nocontexts --setopt=tsflags=nocontexts --setopt=tsflags=nocontexts
execv(/usr/bin/dnf-3) failed: No such file or directory | ```
Start: installing minimal buildroot with dnf
execv(/usr/bin/dnf-3) failed: No such file or directory
WARNING: DNF command failed, retrying, attempt #2, sleeping 10s
execv(/usr/bin/dnf-3) failed: No such file or directory
WARNING: DNF command failed, retrying, attempt #3, sleeping 10s
execv(/usr/bin/dnf-3) failed: No such file or directory
ERROR: Exception(/var/lib/copr-rpmbuild/workspace/workdir-hbejbezy/podman/podman.spec) Config(fedora-eln-x86_64) 0 minutes 28 seconds
INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results
INFO: Cleaning up build root ('cleanup_on_failure=True')
Start: clean chroot
INFO: unmounting tmpfs.
Finish: clean chroot
ERROR: Command failed:
# /usr/bin/systemd-nspawn -q -M b69abec0d8344b1bb43241e024e31b9b -D /var/lib/mock/fedora-eln-x86_64-bootstrap-1715332529.126011/root -a --capability=cap_ipc_lock --rlimit=RLIMIT_NOFILE=10240 --capability=cap_ipc_lock --bind=/tmp/mock-resolv.1ulmbs34:/etc/resolv.conf --console=pipe --setenv=TERM=vt100 --setenv=SHELL=/bin/bash --setenv=HOME=/var/lib/mock/fedora-eln-x86_64-1715332529.126011/root/installation-homedir --setenv=HOSTNAME=mock --setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin '--setenv=PROMPT_COMMAND=printf "\033]0;<mock-chroot>\007"' '--setenv=PS1=<mock-chroot> \s-\v\$ ' --setenv=LANG=C.UTF-8 --setenv=LC_MESSAGES=C.UTF-8 --setenv=SYSTEMD_NSPAWN_TMPFS_TMP=0 --setenv=SYSTEMD_SECCOMP=0 --resolv-conf=off /usr/bin/dnf-3 --installroot /var/lib/mock/fedora-eln-x86_64-1715332529.126011/root/ --releasever eln --setopt=deltarpm=False --setopt=allow_vendor_change=yes --allowerasing --disableplugin=local --disableplugin=spacewalk --disableplugin=versionlock install bash bzip2 coreutils cpio diffutils fedora-release-eln findutils gawk glibc-minimal-langpack grep gzip info patch redhat-rpm-config rpm-build sed tar unzip util-linux which xz --setopt=tsflags=nocontexts --setopt=tsflags=nocontexts --setopt=tsflags=nocontexts
execv(/usr/bin/dnf-3) failed: No such file or directory
``` |
Given following log snippets, their explanation, and nothing else, explain what failure, if any, occurred during build of this package.
Snippets are in a format of [X] : [Y], where [X] is a log snippet, and [Y] is the explanation.
Snippets are delimited with '================'.
Drawing on information from all snippets, provide a concise explanation of the issue and recommend a solution.
Explanation of the issue, and recommended solution, should take a handful of sentences.
Snippets:
[
pyproject_save_files: invalid option -- ']: [Option 'l' isn't valid.]
=============
[
error: /builddir/build/originals/python-hatchling.spec: line 49: Unknown option l in pyproject_save_files]: [Spec file contains error on line 49 in pyproject_save_files()]
| Issue: Spec file or other build file contains errors.
Resolution: Inspect 'pyproject_save_files' and invalid option 'l'. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
pyproject_save_files: invalid option -- ' | Option 'l' isn't valid. |
Analyse following RPM build log snippet. Describe contents accurately, without speculation or suggestions for resolution.
Your analysis must be as concise as possible, while keeping relevant information intact.
Snippet:
error: /builddir/build/originals/python-hatchling.spec: line 49: Unknown option l in pyproject_save_files | Spec file contains error on line 49 in pyproject_save_files() |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.