letao670982/machine_solution · Datasets at Hugging Face

MACHINE_NO stringclasses 48 values	ERROR_ID int64 1 999	ERROR_CODE stringclasses 245 values	ERROR_DESC stringlengths 14 179	ERROR_CATEGORY1 stringclasses 11 values	SOLUTION stringlengths 40 290
KM-ASSYM2-05	2	M71	M71-The right labeling machine is out of material	Abnormal personnel operation	To solve error M71-The right labeling machine is out of material, first, check to ensure that the correct labeling machine is in use and has sufficient material. If the machine is running low, you can either restock it or
KM-ASSYM2-05	5	M74	There is no feedback in the communication between M74-PLC and CCD, please restart the CCD part	Visual abnormality	The solution to this issue could potentially be to restart the CCD part, which could communicate with the M74-PLC and provide feedback. However, it's important to take note that this is just one possible solution and other underlying issues
KM-ASSYM2-05	6	M75	M75-Start detecting that there is material in the work area, please select the work area status	Abnormal personnel operation	The solution for the M75-Start error is to select the work area status as "Clear" before starting the machine. If the work area is not clear, the machine will not start and will display this error message.
KM-ASSYM2-05	13	M82	M82-Please press the reset button before starting the automatic process	Abnormal personnel operation	The solution to the M82 error described as "Please press the reset button before starting the automatic process" is to press the reset button and then restart the device or application that is producing the error. This will often clear any corrupted files or
KM-ASSYM2-05	14	M83	M83-The device has not returned to the origin, please execute the device to return to the origin first	Abnormal personnel operation	The solution to the M83 error is to perform a device initialization or power cycle by turning off the radio and then back on to reset the device's location and return it to its starting point.
KM-ASSYM2-05	15	M84	The communication connection between M84-PLC1 and PLC2 is interrupted	Machine communication abnormality	The solution for the error described as "The communication connection between M84-PLC1 and PLC2 is interrupted" may involve checking the communication protocols, ensuring proper termination of the connection, checking the modems and communication cards,
KM-ASSYM2-05	18	M87	M87-Front buffer conveyor belt discharging operation timeout	Organizational Abnormality	The solution for the M87-Front buffer conveyor belt discharging operation timeout error could involve checking the connection between the conveyor belt and the motor, ensuring the belt speed is appropriate, and verifying that there are no obstructions in
KM-ASSYM2-05	19	M88	M88-Work area inlet conveyor belt operation timeout	Organizational Abnormality	The solution for the M88-Work area inlet conveyor belt operation timeout error could involve adjusting the conveyor belt speed, updating or replacing the equipment, or contacting the manufacturer for assistance. Regular maintenance can also help prevent this error
KM-ASSYM2-05	21	M90	M90-Rear buffer conveyor belt feeding operation timeout	Organizational Abnormality	Solution to M90-Rear buffer conveyor belt feeding operation timeout error is to increase the dwell time or use a higher-capacity buffer to allow the belt more time to feed the product. If the error persists, ensure that the belt
KM-ASSYM2-05	22	M91	M91-Rear buffer conveyor belt discharging operation timeout	Organizational Abnormality	The solution for the M91-Rear buffer conveyor belt discharging operation timeout error may involve several troubleshooting steps. These steps could include checking the conveyor belt’s condition; enabling or disabling the rear buffer convey
KM-ASSYM2-05	23	M92	M92-The operation of the left label discharging machine has timed out, please check the label discharging machine	Electronic control abnormality	The solution for the M92 error is recommended to check the label discharging machine for an issue preventing it from functioning properly, or contact technical support for further assistance.
KM-ASSYM2-05	25	M94	M94- Abnormal rise of blocking cylinder in work area (X20)	Organizational Abnormality	The M94 error code indicates a problem with the blocking cylinder in the work area. To fix this, follow these steps: Check that all the blocking cylinders are functioning properly and that no obstacles are blocking the work area. If
KM-ASSYM2-05	26	M95	M95- Abnormal descent of blocking cylinder in work area (X21)	Organizational Abnormality	The solution for M95- Abnormal descent of blocking cylinder in work area (X21) error involves checking the hydraulic cylinder, adjusting the screws and bushings, replacing or repairing the worn parts,
KM-ASSYM2-05	28	M97	M97 - Abnormal descent of jacking cylinder in work area (X23)	Organizational Abnormality	The solution for M97 Abnormal descent of jacking cylinder in work area (X23) is to inspect the jacking cylinder and its components for damage or defects, and ensure proper maintenance and safe operation of the jacking
KM-ASSYM2-05	35	M104	M104-X axis servo NO readly & ERROR (X10)	Electronic control abnormality	The solution for the M104-X axis servo NO readly and ERROR (X10) can vary depending on the specific issue, but it often involves checking the connections between the servo and the motherboard, confirming that
KM-ASSYM2-05	36	M105	M105-X axis left limit abnormality (X5)	Electronic control abnormality	The M105 error occurs when the X-axis left limit is exceeded during printing, usually resulting from a print bed issue or a loose cable connection. To solve this error, you can adjust the bed leveling, check for loose connections
KM-ASSYM2-05	37	M106	M106-X axis right limit abnormality (X4)	Electronic control abnormality	The solution for the error "M106-X axis right limit abnormality (X4)" usually involves adjusting the position of the print bed or the extruder to ensure that the X-axis is not touching the right limit
KM-ASSYM2-05	38	M107	M107-X axis return to origin time timeout	Electronic control abnormality	The error M107-X axis return to origin timeout indicates that the machine is experiencing a timing issue while returning to the origin position. This error typically occurs when there is a problem with the encoder or motor that is causing the axis to
KM-ASSYM2-05	39	M108	M108-Y axis servo NO readly & ERROR (X11)	Electronic control abnormality	The solution for the error described as M108-Y axis servo NO readly & ERROR (X11) is to reset the printer's configuration or check for any servo problems or update the printer software. If the issue
KM-ASSYM2-05	40	M109	M109-Y axis front limit abnormality (X7)	Electronic control abnormality	The M109-Y axis front limit abnormality (X7) error occurs when the Y-axis position or velocity exceeds the front limit, which can be caused by a damaged Y-axis motor or a faulty limit switch
KM-ASSYM2-05	41	M110	M110-Y axis rear limit abnormality (X6)	Electronic control abnormality	The solution to the M110-Y axis rear limit abnormality (X6) error may involve adjusting the rear limit switch to ensure it is properly aligned with the rear of the bed. If it is still inaccurate after
KM-ASSYM2-03	67	M136	M136-CCD reading arm Arrive signal timed out	Visual abnormality	To fix the M136-CCD reading arm "Arrive signal timed out" error, you can try adjusting the timing settings of the reading arm, resetting the communication between devices, or checking for any possible interference with other
KM-ASSYM2-03	115	M7000	M7000-Manual/Automatic Switching	Other exceptions	The solution for M7000-Manual/Automatic Switching Error depends on the specific error message and circumstances. Resetting the switch or modem may fix the issue, while updating firmware or contacting technical support may also resolve
KM-ASSYM2-03	116	M7001	M7001-Device starting	Other exceptions	The solution for the error M7001-Device Starting may vary depending on the device and operating system, but usually involves resetting the device or performing a firmware update. It's recommended to consult the device's user manual or
KM-ASSYM2-03	117	M7002	M7002-Equipment is stopping	Other exceptions	The solution for an equipment error described as M7002-Equipment is stopping may require disassembling and resetting the system, updating firmware or drivers, contacting equipment manufacturer support for assistance, or resolving any hardware issues
KM-ASSYM2-03	118	M7003	M7003-Device in standby	Other exceptions	M7003-Device in standby typically occurs when the device, such as a wireless router or bridge, has been powered off for an extended period or is experiencing connectivity issues. To troubleshoot this error, first ensure that the
KM-ASSYM2-03	119	M7004	M7004-Equipment alarming	Other exceptions	The solution for M7004-Equipment alarming error would depend on the specific piece of equipment and issue causing it. It could be resolved by performing maintenance or repairs, checking connections or sensors, resetting parameters, or updating software
KM-ASSYM2-03	120	M7005	M7005-Pass function is enabled	Abnormal personnel operation	M7005 error means that the Pass function is enabled in your Excel spreadsheet. To fix this error, you need to disable the Pass function by going to the "Worksheet" tab and clicking on "Properties". In the "
KM-ASSYM2-03	13	M82	M82-The automatic process has not been reset before starting, please press the reset button first	Abnormal personnel operation	The solution for this error is to reset the automatic process, press the reset button, and then start the process again.
KM-ASSYM2-03	20	M89	M89-The material feeding operation in the work area has timed out, please check whether the machine is jammed	Organizational Abnormality	The solution for the M89 error is to open the work area and check for any jammed material or blockage. If there is no jam, perform a restart of the machine while observing the material feed operation. If the error repeats
KM-ASSYM2-03	27	M96	M96-The work area blocking cylinder is rising abnormally (X26), please check whether the cylinder is stuck when rising	Organizational Abnormality	Check if the cylinder is stuck when rising. If the movement is restricted and the cylinder cannot fully extend, then the error M96-The work area blocking cylinder is rising abnormally (X26) may be caused by
KM-ASSYM2-03	42	M111	The M111-MAKE point deviation is too large, please check whether the PCB board is abnormal	Visual abnormality	The solution for the error described as The M111-MAKE point deviation is too large is to check whether the PCB board is abnormal by verifying its design, layout, and connection. If the board is found to be
KM-ASSYM2-03	63	M132	M132-CCD failed to send the completion signal to the arm	Visual abnormality	The error you described is likely related to a communication problem between the M132-CCD and the arm. This issue could be caused by a faulty cable, a malfunctioning device, or incorrect settings. To resolve this issue,
KM-ASSYM2-05	42	M111	M111-Y axis return to origin time timeout	Electronic control abnormality	The solution for M111-Y axis return to origin time timeout error is to increase the timeout value or configure the printer to use a faster communication speed. This can be done using the G901 command or by modifying the printer
KM-ASSYM2-05	43	M112	M112-Nozzle 1 return to origin time timeout	Electronic control abnormality	The solution for error M112 could be to adjust the nozzle control parameters such as rate of speed and acceleration/deceleration or to upgrade the firmware of the printer. Additionally, you could also reduce the print speed
KM-ASSYM2-05	44	M113	M113-Z axis is out of step when nozzle 1 is running, please perform origin return	Electronic control abnormality	The error M113-Z axis is out of step when nozzle 1 is running, indicating a problem with the Z-axis position of the printer. A possible solution is to perform an origin return, which involves resetting the
KM-ASSYM2-05	45	M114	M114-Nozzle 1 manual positioning running time timeout	Electronic control abnormality	The M114-Nozzle 1 manual positioning running time timeout error indicates that the system took too long to respond to a manual positioning request for Nozzle 1. To resolve this issue, check the nozzle
KM-ASSYM2-05	46	M115	M115-Nozzle 1 automatic positioning running time timeout	Electronic control abnormality	The solution for M115-Nozzle 1 automatic positioning running time timeout error is to check the printer's settings and configuration to ensure that the printer is set up to wait long enough for the automatic positioning process to complete
KM-ASSYM2-05	47	M116	M116-Nozzle 1 vacuum abnormality (PLC2-X4)	Electronic control abnormality	The solution for the error M116-Nozzle 1 vacuum abnormality (PLC2-X4) typically involves checking for blockages or leaks in the nozzle and vacuum system, ensuring proper air supply,
KM-ASSYM2-05	48	M117	M117-Nozzle 1 failed to pick up materials several times in a row	Electronic control abnormality	The solution for the error described as M117-Nozzle 1 failed to pick up materials several times in a row is to check the nozzle for clogs or jams, clean the nozzle, verify that the
KM-ASSYM2-05	49	M118	M118-Nozzle 2 return to origin time timeout	Electronic control abnormality	The M118 error occurs when the nozzle does not return to its original position within a specified time limit. To resolve this issue, you may need to adjust the nozzle's positioning parameters or limit the print speed.
KM-ASSYM2-05	50	M119	M119-Z axis is out of step when nozzle 2 is running, please perform origin return	Electronic control abnormality	This error is related to the Z-axis being out of step during printing while Nozzle 2 is running. To resolve this, an origin return must be performed to reset the printer's coordinates and ensure smooth operation.
KM-ASSYM2-05	51	M120	M120-Nozzle 2 manual positioning running time timeout	Electronic control abnormality	The M120 error may occur when the manual positioning of Nozzle 2 exceeds the prescribed time limit. This could be due to several reasons like slow printing speeds, insufficient ink or paper supply, or a software gl
KM-ASSYM2-05	52	M121	M121-Nozzle 2 automatic positioning running time timeout	Electronic control abnormality	The error M121-Nozzle 2 automatic positioning is likely occurring because the nozzle is not sensing the correct position or because there is a connectivity issue between the nozzle and the printer's computer.
KM-ASSYM2-05	53	M122	M122-Nozzle 2 vacuum abnormality (PLC2-X5)	Electronic control abnormality	The M122 error code indicates a vacuum abnormality in Nozzle 2 of a PLC2-X5 machinery. The solution depends on the root cause, but it could involve cleaning the nozzle or replacing a damaged
KM-ASSYM2-05	54	M123	M123-Nozzle 2 failed to pick up materials several times in a row	Electronic control abnormality	The solution to the error M123-Nozzle 2 failed to pick up materials several times in a row is to check for any blockages or clogs in the nozzle, and to verify that the material you are trying
KM-ASSYM2-05	55	M124	M124-Nozzle 1 or Nozzle 2 initialization time timeout	Electronic control abnormality	The solution for M124-Nozzle initialization time timeout error could be resetting the printer, updating the firmware or printer settings, ensuring adequate printer maintenance, or utilizing the printer's diagnostic functionality to determine and resolve the issue.
KM-ASSYM2-05	56	M125	M125-Suction nozzles 1&2 have not reached the safe height when the slide is running (PLC2-X0, X1)	Electronic control abnormality	The solution to the M125-Suction nozzles 1&2 have not reached the safe height error when the slide is running (PLC2-X0, X1) may involve adjusting the nozzle height
KM-ASSYM2-05	57	M126	M126-Nozzle 1&2 Z axis origin sensor abnormality (PLC2-X0, X1)	Sensor abnormality	The solution for the M126 error involving nozzle 1&2 Z axis origin sensor abnormality in a PLC2-X0, X1 system might require calibration, maintenance, or replacement of the Z axis origin
KM-ASSYM2-05	58	M127	M127-Nozzle 1 does not sense the Z1 axis origin sensor (PLC2-X0)	Sensor abnormality	The solution to the M127 error "Nozzle 1 does not sense the Z1 axis origin sensor (PLC2-X0)" would involve troubleshooting the Z1 axis sensor on PLC2-X0
KM-ASSYM2-05	59	M128	M128-Nozzle 2 does not sense the Z2 axis origin sensor (PLC2-X2)	Sensor abnormality	The solution to the M128 error "Nozzle 2 does not sense the Z2 axis origin sensor (PLC2-X2)" usually involves checking and resetting the Z2-axis origin sensor or troubleshooting
KM-ASSYM2-05	60	M129	M129-Product Marker 1 point photo failed	Visual abnormality	The solution for M129-Product Marker 1 point photo failed error is to check if the product marker has been moved or deleted from its original location. If the marker is missing, you can manually add it back by following the steps
KM-ASSYM2-05	61	M130	M130-Product Marker 2 point photo failed	Visual abnormality	Unfortunately, there is no one solution for the M130-Product Marker 2 point photo failed error as it can be caused by various issues such as incorrect photo alignment, lighting conditions, and software compatibility. To resolve it, try adjust
KM-ASSYM2-05	62	M131	M131-Nozzle 1 failed to take pictures with the camera 3 times in a row	Visual abnormality	The solution for M131-Nozzle 1 failed to take pictures with the camera 3 times in a row may require a faulty camera or nozzle, check connections, software updates, or replace the malfunctioning component
KM-ASSYM2-05	63	M132	M132-Nozzle 2 failed to take pictures with the camera 3 times in a row	Visual abnormality	There could be several reasons for this error, including issues with camera hardware or software, connectivity problems, incorrect settings, or problems with the printer's firmware or drivers. The best solution would be to troubleshoot the camera and printer settings
KM-ASSYM2-05	64	M133	M133-Failed to take photos of materials on the left tray three times in a row	Visual abnormality	The solution to the error M133-Failed to take photos of materials on the left tray three times in a row could involve troubleshooting steps such as checking camera settings, ensuring proper lighting, cleaning the camera lens, or restarting
KM-ASSYM2-05	65	M134	M134-Failed to take photos of materials on the right tray three times in a row	Visual abnormality	The M134 error occurs when the machine is unable to take photos of materials on the right tray three times in a row. To solve this error, you can check if the tray is in the correct position and if there are any obstructions
KM-ASSYM2-05	66	M135	M135-Up camera & lower camera failed to capture images	Visual abnormality	The solution for M135-Up camera & Lower camera failed to capture images error can be found by checking the settings of the cameras, ensuring that the memory card is properly formatted and inserted, checking the battery life, and restarting the
KM-ASSYM2-05	67	M136	The connection between M136-CCD and PLC failed	Visual abnormality	The solution for the error "The connection between M136-CCD and PLC failed" would be to check the connections between the two devices, ensure that they are properly configured and functioning properly, and if necessary, troubleshoot the
KM-ASSYM2-05	68	M137	M137-CCD reads PLC product detection request signal timeout (D207=1-12)	Electronic control abnormality	The error described as M137-CCD reads PLC product detection request signal timeout (D207=1-12) occurs when the PLC does not detect the presence of a product after a specified time due to a
KM-ASSYM2-05	69	M138	M138-CCD reads the PLC Marker point photo request signal timeout (D206=1)	Visual abnormality	M138-CCD reads the PLC Marker point photo request signal timeout (D206=1) indicates that the marker point photo request did not receive a response from the PLC. This could be due to communication issues
KM-ASSYM2-05	70	M139	M139-CCD times out when reading the PLC material retrieval request signal (read D209=1 or D219=1)	Electronic control abnormality	The solution for the "M139-CCD times out when reading the PLC material retrieval request signal (read D209=1 or D219=1)" error is to check the signal wiring and ensure
KM-ASSYM2-05	71	M140	M140-CCD reads PLC single-round completion signal timeout (read D720=1)	Electronic control abnormality	The solution for the error M140-CCD reads PLC single-round completion signal timeout (read D720=1) is to first verify that the PLC timer parameter is set correctly to match the time required for the
KM-ASSYM2-05	72	M141	M141-CCD reads the PLC right material picking completion signal timeout (read D228=1)	Electronic control abnormality	The M141-CCD error occurs when the PLC fails to receive a material picking completion signal from the CCD sensor for a set timeout period. To resolve this issue, you can check the CCD sensor and cable connections, adjust
KM-ASSYM2-05	73	M142	M142-CCD reads the CCD photo request signal under the PLC and times out (read D230=1)	Electronic control abnormality	It appears that M142-CCD and D230 are related to a photo request signal under a PLC. The error message suggests that the PLC is not able to read the signal properly and times out. Without more specific
KM-ASSYM2-05	74	M143	M143-CCD times out when reading the PLC material picking and photographing request signal (read D202=1 or D204=1)	Visual abnormality	The solution for the M143-CCD times out error when reading the PLC material picking and photographing request signal is to increase the timeout value for the PLC interface in the device driver settings. You can try to increase the timeout
KM-ASSYM2-05	75	M144	Assembly point is out of range	Visual abnormality	The Assembly point is out of range error occurs when the program tries to use an invalid address in an instruction. The solution is to ensure that the address being used is within the allowed range, typically 0x00000000
KM-ASSYM2-05	76	M145	The picking point is out of range	Visual abnormality	The error "The picking point is out of range" occurs when the coordinates of the picking point are invalid. To solve this error, make sure that the picking point's coordinates fall within the valid range and try again.
KM-ASSYM2-05	77	M146	M146-PLC timed out waiting for the CCD to reply with the result of taking the material and taking pictures (read D202=100 or D204=100)	Visual abnormality	The solution for the M146-PLC timed out waiting for the CCD to reply with the result of taking the material and taking pictures could be to check the communication settings between the PLC and CCD and ensure that they are
KM-ASSYM2-05	78	M147	M147-PLC timed out waiting for CCD to reply to the Mark point photo result (D206=100)	Visual abnormality	The solution for M147-PLC timeout error is to increase the timeout duration for the CCD in the PLC system. The timeout duration can be set in the PLC system's configuration, usually in the communication settings. Incre
KM-ASSYM2-05	79	M148	M148-PLC timed out while waiting for CCD to reply with product detection and photographing results (D207=100)	Visual abnormality	M148-PLC timed out while waiting for CCD to reply with product detection and photographing results (D207=100) is an error message indicating that the control system (PLC) is unable to
KM-ASSYM2-05	80	M149	M149-PLC timed out while waiting for CCD reply to the camera photo taking result (D230=100 or 101)	Visual abnormality	The error M149-PLC timed out while waiting for CCD reply to the camera photo taking result indicates that the PLC is waiting for a response from the CCD camera but is not receiving a reply. This error can be
KM-ASSYM2-05	81	M150	M150-PLC timed out while waiting for CCD to send the retrieval command (D208=1&2&3&4)	Visual abnormality	The solution to M150-PLC timed out while waiting for CCD to send the retrieval command could be to increase the timeout value in the PLC programming or to add a delay between the CCD command and the PLC
KM-ASSYM2-05	83	M152	M152-PLC timed out waiting for CCD to send nozzle 1&2 discharging coordinates (D700&D710)	Visual abnormality	The solution for error M152-PLC timed out waiting for CCD to send nozzle 1&2 discharging coordinates (D700&D710) could involve adjusting the timing settings between
KM-ASSYM2-05	3	M72	M72-The operation of the left label discharging machine has timed out, please check the label discharging machine	Electronic control abnormality	"The left label discharging machine has experienced a timeout Error M72. For assistance, please verify the label discharging machine's operation and adjust settings or contact system support for further troubleshooting."
KM-ASSYM2-05	11	M80	M80-EMO&&DOOR is on. Please check the safety door and emergency stop switch (X14)	Abnormal personnel operation	The solution for the error M80-EMO&&DOOR is on. Please check the safety door and emergency stop switch (X14) involves resetting the emergency stop button and ensuring that the safety door is closed before starting the machine
KM-ASSYM2-05	17	M86	M86-Front buffer conveyor belt feeding operation timeout	Organizational Abnormality	The solution for the error M86-Front buffer conveyor belt feeding operation timeout is to clean the belt, tighten any loose connections, and ensure proper alignment between components. If the issue persists, check for blockages and repair or replace
KM-ASSYM2-05	20	M89	M89-Work area discharging conveyor belt operation timeout	Organizational Abnormality	The solution to the M89-Work area discharging conveyor belt operation timeout error typically involves cleaning the belt and belt feeder, removing blockages, and adjusting the conveyor speed. If the error persists, you may need
KM-ASSYM2-05	27	M96	M96- Abnormal rise of jacking cylinder in work area (X22)	Organizational Abnormality	The solution for the M96 error code "Abnormal rise of jacking cylinder in work area (X22)" would typically involve performing a thorough inspection of the equipment to identify any faulty components or loose connections. Once the cause of
KM-ASSYM2-05	24	M93	M93-The operation of the right label dispensing machine has timed out, please check the label discharging machine	Electronic control abnormality	The solution for the M93 error is to check the label discharging machine and ensure that it is functioning properly. The issue could be caused by a paper jam or other problem with the machine, which is delaying the dispensing process and
KM-ASSYM2-05	82	M151	M151-PLC timed out waiting for CCD to send the pickup coordinates of nozzle 1&2 (D210&D220)	Visual abnormality	The solution for the M151-PLC error is to increase the timeout value in the PLC program for the CCD camera to send the pickup coordinates of nozzles 1 and 2.
KM-ASSYM2-06	35	M7034	M7034-The feeding conveyor belt in the work area has run timeout, please check whether the machine is jammed	Organizational Abnormality	The solution for the error described as M7034 is to check if the feeding conveyor belt is jammed. If it is, troubleshoot the problem and clear any obstructions. If the problem persists, seek technical support from
KM-ASSYM2-06	36	M7035	M7035-The discharge conveyor belt in the work area has run timeout, please check whether the machine is jammed	Organizational Abnormality	The solution for M7035 error is to manually check if the discharge conveyor belt is jammed by inspecting the belt and clearing any obstacles or debris. If the problem persists, it may require maintenance or repair of the
KM-ASSYM2-06	37	M7036	M7036-The feeding operation of the rear buffer conveyor belt has timed out, please check whether the machine is jammed	Organizational Abnormality	The solution for the M7036 error is to check the rear buffer conveyor belt for jams or obstructions. If the belt is jammed, clear the obstruction and try running the belt again. If the belt continues to jam
KM-ASSYM2-06	38	M7037	M7037-The discharging operation of the rear buffer conveyor belt times out, please check whether there is any jamming between the upper and lower reaches of the machine	Organizational Abnormality	M7037 error occurs when the discharging operation of the rear buffer conveyor belt times out and there is jamming between the upper and lower reaches of the machine. The solution is to clear any jamming in the machine, ensuring
KM-ASSYM2-06	39	M7038	M7038-The work area blocking cylinder is rising abnormally (X33), please check whether the cylinder is stuck when rising	Organizational Abnormality	The solution for the error M7038-The work area blocking cylinder is rising abnormally (X33) is to check whether the cylinder is stuck when rising. If it is, the cylinder may need to be
KM-ASSYM2-06	40	M7039	M7039-The work area blocking cylinder is abnormally descending (X34), please check whether the cylinder is stuck when descending	Organizational Abnormality	The solution for the M7039 error is to manually lower the cylinder and verify that it moves freely. If the cylinder only moves when lowered, it may be stuck and the maintenance team should be consulted for further investigation and repair
KM-ASSYM2-06	41	M7040	M7040-The jacking cylinder in the work area rises abnormally (X31), please check whether the cylinder is stuck when rising	Organizational Abnormality	There are several possible reasons for M7040-The jacking cylinder in the work area rises abnormally. One cause could be a stuck cylinder, which could be due to pressure buildup or debris blocking the cylinder
KM-ASSYM2-06	42	M7041	M7041-The lifting cylinder in the work area is abnormally descending (X32), please check whether the cylinder is stuck when descending	Organizational Abnormality	The solution for the M7041-The lifting cylinder in the work area is abnormally descending (X32) error is to check if the cylinder is stuck when descending. If it is stuck, the cyl
KM-ASSYM2-06	43	M7042	M7042-The conveyor belt width adjustment cylinder extends abnormally (X27), please check whether the cylinder is stuck when it rises	Organizational Abnormality	The solution for the M7042 error described as "The conveyor belt width adjustment cylinder extends abnormally (X27)" is to check whether the cylinder is stuck when it rises. If the cylinder is
KM-ASSYM2-06	44	M7043	M7043-Conveyor belt width adjustment cylinder retracts abnormally (X30), please check whether the cylinder is stuck when descending	Organizational Abnormality	The solution for M7043 errors related to the conveyor belt width adjustment cylinder retracting abnormally (X30) involves checking whether the cylinder is stuck during descent. This issue can cause damage to the convey
KM-ASSYM2-06	54	M7053	M7053-The current glue amount is too much, please reduce it	Electronic control abnormality	Reduce the current glue amount by using less adhesive, replacing damaged parts, or adjusting the bonding process to ensure proper adhesion. In some cases, the use of a different type of adhesive or solvent may
KM-ASSYM2-06	55	M7054	M7054-The current dispensing amount is too small, please increase	Electronic control abnormality	The error M7054 usually occurs when the dispensing amount is less than the minimum amount required. To solve this error, you need to increase the dispensing amount by adjusting the settings on your printer or using a different ink cartr
KM-ASSYM2-06	65	M7064	M7064-X-axis servo NO readly(X14)&ERROR, please check whether the X-axis servo driver is abnormal	Electronic control abnormality	The solution to the M7064-X-axis servo NO readly(X14)&ERROR error is to check the abnormality of the X-axis servo driver. You can do this by examining the logs
KM-ASSYM2-06	66	M7065	M7065-The right limit of the X-axis is abnormal, close to the origin end (X7), please check whether the slide table touches the limit	Electronic control abnormality	The solution for the M7065 error is to check if the slide table is touching the limit at the origin end (X7) and increase the left limit value if necessary to prevent the issue.
KM-ASSYM2-06	68	M7067	M7067-X axis return to origin time has timed out, please check whether the slide table is abnormal or stuck	Electronic control abnormality	The error M7067 typically occurs when the X-axis slide table times out during its return to origin movement. This could be due to a malfunctioning actuator, a stuck slide table, or a problem with the home position
KM-ASSYM2-06	69	M7068	M7068-Y-axis servo NO readly(X15)&ERROR, please check whether the X-axis servo driver is abnormal	Electronic control abnormality	The error M7068-Y-axis servo NO readly(X15)&ERROR usually indicates that there is a failure in the communication between the X-axis servo driver and the printer. To solve the problem, it
KM-ASSYM2-06	71	M7070	M7070-Y axis rear limit is abnormal, far away from the origin end (X10), please check whether the slide table touches the limit	Electronic control abnormality	The solution to the M7070-Y axis rear limit abnormal issue is to check if the slide table is touching the limit or if it has moved too far from the origin end (X10). If the slide table is touching
KM-ASSYM2-06	72	M7071	M7071-Y axis return to origin time has timed out, please check whether the slide table is abnormal or stuck	Electronic control abnormality	The M7071-Y axis return to origin time has timed out error indicates that the Y-axis slide table is not responding to commands. This can be due to a stuck or abnormal condition. To troubleshoot this issue
KM-ASSYM2-06	73	M7072	M7072-Z-axis servo NO readly(X16)&ERROR, please check whether the Z-axis servo driver is abnormal	Electronic control abnormality	The error M7072-Z-axis servo NO ready(X16)&ERROR suggests that there might be an issue with the Z-axis servo driver. The solution for this issue is to check the Z-axis serv

KM-ASSYM2-05

2

M71

M71-The right labeling machine is out of material

Abnormal personnel operation

To solve error M71-The right labeling machine is out of material, first, check to ensure that the correct labeling machine is in use and has sufficient material. If the machine is running low, you can either restock it or

KM-ASSYM2-05

5

M74

There is no feedback in the communication between M74-PLC and CCD, please restart the CCD part

Visual abnormality

The solution to this issue could potentially be to restart the CCD part, which could communicate with the M74-PLC and provide feedback. However, it's important to take note that this is just one possible solution and other underlying issues

KM-ASSYM2-05

6

M75

M75-Start detecting that there is material in the work area, please select the work area status

Abnormal personnel operation

The solution for the M75-Start error is to select the work area status as "Clear" before starting the machine. If the work area is not clear, the machine will not start and will display this error message.

KM-ASSYM2-05

13

M82

M82-Please press the reset button before starting the automatic process

Abnormal personnel operation

The solution to the M82 error described as "Please press the reset button before starting the automatic process" is to press the reset button and then restart the device or application that is producing the error. This will often clear any corrupted files or

KM-ASSYM2-05

14

M83

M83-The device has not returned to the origin, please execute the device to return to the origin first

Abnormal personnel operation

The solution to the M83 error is to perform a device initialization or power cycle by turning off the radio and then back on to reset the device's location and return it to its starting point.

KM-ASSYM2-05

15

M84

The communication connection between M84-PLC1 and PLC2 is interrupted

Machine communication abnormality

The solution for the error described as "The communication connection between M84-PLC1 and PLC2 is interrupted" may involve checking the communication protocols, ensuring proper termination of the connection, checking the modems and communication cards,

KM-ASSYM2-05

18

M87

M87-Front buffer conveyor belt discharging operation timeout

Organizational Abnormality

The solution for the M87-Front buffer conveyor belt discharging operation timeout error could involve checking the connection between the conveyor belt and the motor, ensuring the belt speed is appropriate, and verifying that there are no obstructions in

KM-ASSYM2-05

19

M88

M88-Work area inlet conveyor belt operation timeout

Organizational Abnormality

The solution for the M88-Work area inlet conveyor belt operation timeout error could involve adjusting the conveyor belt speed, updating or replacing the equipment, or contacting the manufacturer for assistance. Regular maintenance can also help prevent this error

KM-ASSYM2-05

21

M90

M90-Rear buffer conveyor belt feeding operation timeout

Organizational Abnormality

Solution to M90-Rear buffer conveyor belt feeding operation timeout error is to increase the dwell time or use a higher-capacity buffer to allow the belt more time to feed the product. If the error persists, ensure that the belt

KM-ASSYM2-05

22

M91

M91-Rear buffer conveyor belt discharging operation timeout

Organizational Abnormality

The solution for the M91-Rear buffer conveyor belt discharging operation timeout error may involve several troubleshooting steps. These steps could include checking the conveyor belt’s condition; enabling or disabling the rear buffer convey

KM-ASSYM2-05

23

M92

M92-The operation of the left label discharging machine has timed out, please check the label discharging machine

Electronic control abnormality

The solution for the M92 error is recommended to check the label discharging machine for an issue preventing it from functioning properly, or contact technical support for further assistance.

KM-ASSYM2-05

25

M94

M94- Abnormal rise of blocking cylinder in work area (X20)

Organizational Abnormality

The M94 error code indicates a problem with the blocking cylinder in the work area. To fix this, follow these steps: Check that all the blocking cylinders are functioning properly and that no obstacles are blocking the work area. If

KM-ASSYM2-05

26

M95

M95- Abnormal descent of blocking cylinder in work area (X21)

Organizational Abnormality

The solution for M95- Abnormal descent of blocking cylinder in work area (X21) error involves checking the hydraulic cylinder, adjusting the screws and bushings, replacing or repairing the worn parts,

KM-ASSYM2-05

28

M97

M97 - Abnormal descent of jacking cylinder in work area (X23)

Organizational Abnormality

The solution for M97 Abnormal descent of jacking cylinder in work area (X23) is to inspect the jacking cylinder and its components for damage or defects, and ensure proper maintenance and safe operation of the jacking

KM-ASSYM2-05

35

M104

M104-X axis servo NO readly & ERROR (X10)

Electronic control abnormality

The solution for the M104-X axis servo NO readly and ERROR (X10) can vary depending on the specific issue, but it often involves checking the connections between the servo and the motherboard, confirming that

KM-ASSYM2-05

36

M105

M105-X axis left limit abnormality (X5)

Electronic control abnormality

The M105 error occurs when the X-axis left limit is exceeded during printing, usually resulting from a print bed issue or a loose cable connection. To solve this error, you can adjust the bed leveling, check for loose connections

KM-ASSYM2-05

37

M106

M106-X axis right limit abnormality (X4)

Electronic control abnormality

The solution for the error "M106-X axis right limit abnormality (X4)" usually involves adjusting the position of the print bed or the extruder to ensure that the X-axis is not touching the right limit

KM-ASSYM2-05

38

M107

M107-X axis return to origin time timeout

Electronic control abnormality

The error M107-X axis return to origin timeout indicates that the machine is experiencing a timing issue while returning to the origin position. This error typically occurs when there is a problem with the encoder or motor that is causing the axis to

KM-ASSYM2-05

39

M108

M108-Y axis servo NO readly & ERROR (X11)

Electronic control abnormality

The solution for the error described as M108-Y axis servo NO readly & ERROR (X11) is to reset the printer's configuration or check for any servo problems or update the printer software. If the issue

KM-ASSYM2-05

40

M109

M109-Y axis front limit abnormality (X7)

Electronic control abnormality

The M109-Y axis front limit abnormality (X7) error occurs when the Y-axis position or velocity exceeds the front limit, which can be caused by a damaged Y-axis motor or a faulty limit switch

KM-ASSYM2-05

41

M110

M110-Y axis rear limit abnormality (X6)

Electronic control abnormality

The solution to the M110-Y axis rear limit abnormality (X6) error may involve adjusting the rear limit switch to ensure it is properly aligned with the rear of the bed. If it is still inaccurate after

KM-ASSYM2-03

67

M136

M136-CCD reading arm Arrive signal timed out

Visual abnormality

To fix the M136-CCD reading arm "Arrive signal timed out" error, you can try adjusting the timing settings of the reading arm, resetting the communication between devices, or checking for any possible interference with other

KM-ASSYM2-03

115

M7000

M7000-Manual/Automatic Switching

Other exceptions

The solution for M7000-Manual/Automatic Switching Error depends on the specific error message and circumstances. Resetting the switch or modem may fix the issue, while updating firmware or contacting technical support may also resolve

KM-ASSYM2-03

116

M7001

M7001-Device starting

Other exceptions

The solution for the error M7001-Device Starting may vary depending on the device and operating system, but usually involves resetting the device or performing a firmware update. It's recommended to consult the device's user manual or

KM-ASSYM2-03

117

M7002

M7002-Equipment is stopping

Other exceptions

The solution for an equipment error described as M7002-Equipment is stopping may require disassembling and resetting the system, updating firmware or drivers, contacting equipment manufacturer support for assistance, or resolving any hardware issues

KM-ASSYM2-03

118

M7003

M7003-Device in standby

Other exceptions

M7003-Device in standby typically occurs when the device, such as a wireless router or bridge, has been powered off for an extended period or is experiencing connectivity issues. To troubleshoot this error, first ensure that the

KM-ASSYM2-03

119

M7004

M7004-Equipment alarming

Other exceptions

The solution for M7004-Equipment alarming error would depend on the specific piece of equipment and issue causing it. It could be resolved by performing maintenance or repairs, checking connections or sensors, resetting parameters, or updating software

KM-ASSYM2-03

120

M7005

M7005-Pass function is enabled

Abnormal personnel operation

M7005 error means that the Pass function is enabled in your Excel spreadsheet. To fix this error, you need to disable the Pass function by going to the "Worksheet" tab and clicking on "Properties". In the "

KM-ASSYM2-03

13

M82

M82-The automatic process has not been reset before starting, please press the reset button first

Abnormal personnel operation

The solution for this error is to reset the automatic process, press the reset button, and then start the process again.

KM-ASSYM2-03

20

M89

M89-The material feeding operation in the work area has timed out, please check whether the machine is jammed

Organizational Abnormality

The solution for the M89 error is to open the work area and check for any jammed material or blockage. If there is no jam, perform a restart of the machine while observing the material feed operation. If the error repeats

KM-ASSYM2-03

27

M96

M96-The work area blocking cylinder is rising abnormally (X26), please check whether the cylinder is stuck when rising

Organizational Abnormality

Check if the cylinder is stuck when rising. If the movement is restricted and the cylinder cannot fully extend, then the error M96-The work area blocking cylinder is rising abnormally (X26) may be caused by

KM-ASSYM2-03

42

M111

The M111-MAKE point deviation is too large, please check whether the PCB board is abnormal

Visual abnormality

The solution for the error described as The M111-MAKE point deviation is too large is to check whether the PCB board is abnormal by verifying its design, layout, and connection. If the board is found to be

KM-ASSYM2-03

63

M132

M132-CCD failed to send the completion signal to the arm

Visual abnormality

The error you described is likely related to a communication problem between the M132-CCD and the arm. This issue could be caused by a faulty cable, a malfunctioning device, or incorrect settings. To resolve this issue,

KM-ASSYM2-05

42

M111

M111-Y axis return to origin time timeout

Electronic control abnormality

The solution for M111-Y axis return to origin time timeout error is to increase the timeout value or configure the printer to use a faster communication speed. This can be done using the G901 command or by modifying the printer

KM-ASSYM2-05

43

M112

M112-Nozzle 1 return to origin time timeout

Electronic control abnormality

The solution for error M112 could be to adjust the nozzle control parameters such as rate of speed and acceleration/deceleration or to upgrade the firmware of the printer. Additionally, you could also reduce the print speed

KM-ASSYM2-05

44

M113

M113-Z axis is out of step when nozzle 1 is running, please perform origin return

Electronic control abnormality

The error M113-Z axis is out of step when nozzle 1 is running, indicating a problem with the Z-axis position of the printer. A possible solution is to perform an origin return, which involves resetting the

KM-ASSYM2-05

45

M114

M114-Nozzle 1 manual positioning running time timeout

Electronic control abnormality

The M114-Nozzle 1 manual positioning running time timeout error indicates that the system took too long to respond to a manual positioning request for Nozzle 1. To resolve this issue, check the nozzle

KM-ASSYM2-05

46

M115

M115-Nozzle 1 automatic positioning running time timeout

Electronic control abnormality

The solution for M115-Nozzle 1 automatic positioning running time timeout error is to check the printer's settings and configuration to ensure that the printer is set up to wait long enough for the automatic positioning process to complete

KM-ASSYM2-05

47

M116

M116-Nozzle 1 vacuum abnormality (PLC2-X4)

Electronic control abnormality

The solution for the error M116-Nozzle 1 vacuum abnormality (PLC2-X4) typically involves checking for blockages or leaks in the nozzle and vacuum system, ensuring proper air supply,

KM-ASSYM2-05

48

M117

M117-Nozzle 1 failed to pick up materials several times in a row

Electronic control abnormality

The solution for the error described as M117-Nozzle 1 failed to pick up materials several times in a row is to check the nozzle for clogs or jams, clean the nozzle, verify that the

KM-ASSYM2-05

49

M118

M118-Nozzle 2 return to origin time timeout

Electronic control abnormality

The M118 error occurs when the nozzle does not return to its original position within a specified time limit. To resolve this issue, you may need to adjust the nozzle's positioning parameters or limit the print speed.

KM-ASSYM2-05

50

M119

M119-Z axis is out of step when nozzle 2 is running, please perform origin return

Electronic control abnormality

This error is related to the Z-axis being out of step during printing while Nozzle 2 is running. To resolve this, an origin return must be performed to reset the printer's coordinates and ensure smooth operation.

KM-ASSYM2-05

51

M120

M120-Nozzle 2 manual positioning running time timeout

Electronic control abnormality

The M120 error may occur when the manual positioning of Nozzle 2 exceeds the prescribed time limit. This could be due to several reasons like slow printing speeds, insufficient ink or paper supply, or a software gl

KM-ASSYM2-05

52

M121

M121-Nozzle 2 automatic positioning running time timeout

Electronic control abnormality

The error M121-Nozzle 2 automatic positioning is likely occurring because the nozzle is not sensing the correct position or because there is a connectivity issue between the nozzle and the printer's computer.

KM-ASSYM2-05

53

M122

M122-Nozzle 2 vacuum abnormality (PLC2-X5)

Electronic control abnormality

The M122 error code indicates a vacuum abnormality in Nozzle 2 of a PLC2-X5 machinery. The solution depends on the root cause, but it could involve cleaning the nozzle or replacing a damaged

KM-ASSYM2-05

54

M123

M123-Nozzle 2 failed to pick up materials several times in a row

Electronic control abnormality

The solution to the error M123-Nozzle 2 failed to pick up materials several times in a row is to check for any blockages or clogs in the nozzle, and to verify that the material you are trying

KM-ASSYM2-05

55

M124

M124-Nozzle 1 or Nozzle 2 initialization time timeout

Electronic control abnormality

The solution for M124-Nozzle initialization time timeout error could be resetting the printer, updating the firmware or printer settings, ensuring adequate printer maintenance, or utilizing the printer's diagnostic functionality to determine and resolve the issue.

KM-ASSYM2-05

56

M125

M125-Suction nozzles 1&2 have not reached the safe height when the slide is running (PLC2-X0, X1)

Electronic control abnormality

The solution to the M125-Suction nozzles 1&2 have not reached the safe height error when the slide is running (PLC2-X0, X1) may involve adjusting the nozzle height

KM-ASSYM2-05

57

M126

M126-Nozzle 1&2 Z axis origin sensor abnormality (PLC2-X0, X1)

Sensor abnormality

The solution for the M126 error involving nozzle 1&2 Z axis origin sensor abnormality in a PLC2-X0, X1 system might require calibration, maintenance, or replacement of the Z axis origin

KM-ASSYM2-05

58

M127

M127-Nozzle 1 does not sense the Z1 axis origin sensor (PLC2-X0)

Sensor abnormality

The solution to the M127 error "Nozzle 1 does not sense the Z1 axis origin sensor (PLC2-X0)" would involve troubleshooting the Z1 axis sensor on PLC2-X0

KM-ASSYM2-05

59

M128

M128-Nozzle 2 does not sense the Z2 axis origin sensor (PLC2-X2)

Sensor abnormality

The solution to the M128 error "Nozzle 2 does not sense the Z2 axis origin sensor (PLC2-X2)" usually involves checking and resetting the Z2-axis origin sensor or troubleshooting

KM-ASSYM2-05

60

M129

M129-Product Marker 1 point photo failed

Visual abnormality

The solution for M129-Product Marker 1 point photo failed error is to check if the product marker has been moved or deleted from its original location. If the marker is missing, you can manually add it back by following the steps

KM-ASSYM2-05

61

M130

M130-Product Marker 2 point photo failed

Visual abnormality

Unfortunately, there is no one solution for the M130-Product Marker 2 point photo failed error as it can be caused by various issues such as incorrect photo alignment, lighting conditions, and software compatibility. To resolve it, try adjust

KM-ASSYM2-05

62

M131

M131-Nozzle 1 failed to take pictures with the camera 3 times in a row

Visual abnormality

The solution for M131-Nozzle 1 failed to take pictures with the camera 3 times in a row may require a faulty camera or nozzle, check connections, software updates, or replace the malfunctioning component

KM-ASSYM2-05

63

M132

M132-Nozzle 2 failed to take pictures with the camera 3 times in a row

Visual abnormality

There could be several reasons for this error, including issues with camera hardware or software, connectivity problems, incorrect settings, or problems with the printer's firmware or drivers. The best solution would be to troubleshoot the camera and printer settings

KM-ASSYM2-05

64

M133

M133-Failed to take photos of materials on the left tray three times in a row

Visual abnormality

The solution to the error M133-Failed to take photos of materials on the left tray three times in a row could involve troubleshooting steps such as checking camera settings, ensuring proper lighting, cleaning the camera lens, or restarting

KM-ASSYM2-05

65

M134

M134-Failed to take photos of materials on the right tray three times in a row

Visual abnormality

The M134 error occurs when the machine is unable to take photos of materials on the right tray three times in a row. To solve this error, you can check if the tray is in the correct position and if there are any obstructions

KM-ASSYM2-05

66

M135

M135-Up camera & lower camera failed to capture images

Visual abnormality

The solution for M135-Up camera & Lower camera failed to capture images error can be found by checking the settings of the cameras, ensuring that the memory card is properly formatted and inserted, checking the battery life, and restarting the

KM-ASSYM2-05

67

M136

The connection between M136-CCD and PLC failed

Visual abnormality

The solution for the error "The connection between M136-CCD and PLC failed" would be to check the connections between the two devices, ensure that they are properly configured and functioning properly, and if necessary, troubleshoot the

KM-ASSYM2-05

68

M137

M137-CCD reads PLC product detection request signal timeout (D207=1-12)

Electronic control abnormality

The error described as M137-CCD reads PLC product detection request signal timeout (D207=1-12) occurs when the PLC does not detect the presence of a product after a specified time due to a

KM-ASSYM2-05

69

M138

M138-CCD reads the PLC Marker point photo request signal timeout (D206=1)

Visual abnormality

M138-CCD reads the PLC Marker point photo request signal timeout (D206=1) indicates that the marker point photo request did not receive a response from the PLC. This could be due to communication issues

KM-ASSYM2-05

70

M139

M139-CCD times out when reading the PLC material retrieval request signal (read D209=1 or D219=1)

Electronic control abnormality

The solution for the "M139-CCD times out when reading the PLC material retrieval request signal (read D209=1 or D219=1)" error is to check the signal wiring and ensure

KM-ASSYM2-05

71

M140

M140-CCD reads PLC single-round completion signal timeout (read D720=1)

Electronic control abnormality

The solution for the error M140-CCD reads PLC single-round completion signal timeout (read D720=1) is to first verify that the PLC timer parameter is set correctly to match the time required for the

KM-ASSYM2-05

72

M141

M141-CCD reads the PLC right material picking completion signal timeout (read D228=1)

Electronic control abnormality

The M141-CCD error occurs when the PLC fails to receive a material picking completion signal from the CCD sensor for a set timeout period. To resolve this issue, you can check the CCD sensor and cable connections, adjust

KM-ASSYM2-05

73

M142

M142-CCD reads the CCD photo request signal under the PLC and times out (read D230=1)

Electronic control abnormality

It appears that M142-CCD and D230 are related to a photo request signal under a PLC. The error message suggests that the PLC is not able to read the signal properly and times out. Without more specific

KM-ASSYM2-05

74

M143

M143-CCD times out when reading the PLC material picking and photographing request signal (read D202=1 or D204=1)

Visual abnormality

The solution for the M143-CCD times out error when reading the PLC material picking and photographing request signal is to increase the timeout value for the PLC interface in the device driver settings. You can try to increase the timeout

KM-ASSYM2-05

75

M144

Assembly point is out of range

Visual abnormality

The Assembly point is out of range error occurs when the program tries to use an invalid address in an instruction. The solution is to ensure that the address being used is within the allowed range, typically 0x00000000

KM-ASSYM2-05

76

M145

The picking point is out of range

Visual abnormality

The error "The picking point is out of range" occurs when the coordinates of the picking point are invalid. To solve this error, make sure that the picking point's coordinates fall within the valid range and try again.

KM-ASSYM2-05

77

M146

M146-PLC timed out waiting for the CCD to reply with the result of taking the material and taking pictures (read D202=100 or D204=100)

Visual abnormality

The solution for the M146-PLC timed out waiting for the CCD to reply with the result of taking the material and taking pictures could be to check the communication settings between the PLC and CCD and ensure that they are

KM-ASSYM2-05

78

M147

M147-PLC timed out waiting for CCD to reply to the Mark point photo result (D206=100)

Visual abnormality

The solution for M147-PLC timeout error is to increase the timeout duration for the CCD in the PLC system. The timeout duration can be set in the PLC system's configuration, usually in the communication settings. Incre

KM-ASSYM2-05

79

M148

M148-PLC timed out while waiting for CCD to reply with product detection and photographing results (D207=100)

Visual abnormality

M148-PLC timed out while waiting for CCD to reply with product detection and photographing results (D207=100) is an error message indicating that the control system (PLC) is unable to

KM-ASSYM2-05

80

M149

M149-PLC timed out while waiting for CCD reply to the camera photo taking result (D230=100 or 101)

Visual abnormality

The error M149-PLC timed out while waiting for CCD reply to the camera photo taking result indicates that the PLC is waiting for a response from the CCD camera but is not receiving a reply. This error can be

KM-ASSYM2-05

81

M150

M150-PLC timed out while waiting for CCD to send the retrieval command (D208=1&2&3&4)

Visual abnormality

The solution to M150-PLC timed out while waiting for CCD to send the retrieval command could be to increase the timeout value in the PLC programming or to add a delay between the CCD command and the PLC

KM-ASSYM2-05

83

M152

M152-PLC timed out waiting for CCD to send nozzle 1&2 discharging coordinates (D700&D710)

Visual abnormality

The solution for error M152-PLC timed out waiting for CCD to send nozzle 1&2 discharging coordinates (D700&D710) could involve adjusting the timing settings between

KM-ASSYM2-05

3

M72

M72-The operation of the left label discharging machine has timed out, please check the label discharging machine

Electronic control abnormality

"The left label discharging machine has experienced a timeout Error M72. For assistance, please verify the label discharging machine's operation and adjust settings or contact system support for further troubleshooting."

KM-ASSYM2-05

11

M80

M80-EMO&&DOOR is on. Please check the safety door and emergency stop switch (X14)

Abnormal personnel operation

The solution for the error M80-EMO&&DOOR is on. Please check the safety door and emergency stop switch (X14) involves resetting the emergency stop button and ensuring that the safety door is closed before starting the machine

KM-ASSYM2-05

17

M86

M86-Front buffer conveyor belt feeding operation timeout

Organizational Abnormality

The solution for the error M86-Front buffer conveyor belt feeding operation timeout is to clean the belt, tighten any loose connections, and ensure proper alignment between components. If the issue persists, check for blockages and repair or replace

KM-ASSYM2-05

20

M89

M89-Work area discharging conveyor belt operation timeout

Organizational Abnormality

The solution to the M89-Work area discharging conveyor belt operation timeout error typically involves cleaning the belt and belt feeder, removing blockages, and adjusting the conveyor speed. If the error persists, you may need

KM-ASSYM2-05

27

M96

M96- Abnormal rise of jacking cylinder in work area (X22)

Organizational Abnormality

The solution for the M96 error code "Abnormal rise of jacking cylinder in work area (X22)" would typically involve performing a thorough inspection of the equipment to identify any faulty components or loose connections. Once the cause of

KM-ASSYM2-05

24

M93

M93-The operation of the right label dispensing machine has timed out, please check the label discharging machine

Electronic control abnormality

The solution for the M93 error is to check the label discharging machine and ensure that it is functioning properly. The issue could be caused by a paper jam or other problem with the machine, which is delaying the dispensing process and

KM-ASSYM2-05

82

M151

M151-PLC timed out waiting for CCD to send the pickup coordinates of nozzle 1&2 (D210&D220)

Visual abnormality

The solution for the M151-PLC error is to increase the timeout value in the PLC program for the CCD camera to send the pickup coordinates of nozzles 1 and 2.

KM-ASSYM2-06

35

M7034

M7034-The feeding conveyor belt in the work area has run timeout, please check whether the machine is jammed

Organizational Abnormality

The solution for the error described as M7034 is to check if the feeding conveyor belt is jammed. If it is, troubleshoot the problem and clear any obstructions. If the problem persists, seek technical support from

KM-ASSYM2-06

36

M7035

M7035-The discharge conveyor belt in the work area has run timeout, please check whether the machine is jammed

Organizational Abnormality

The solution for M7035 error is to manually check if the discharge conveyor belt is jammed by inspecting the belt and clearing any obstacles or debris. If the problem persists, it may require maintenance or repair of the

KM-ASSYM2-06

37

M7036

M7036-The feeding operation of the rear buffer conveyor belt has timed out, please check whether the machine is jammed

Organizational Abnormality

The solution for the M7036 error is to check the rear buffer conveyor belt for jams or obstructions. If the belt is jammed, clear the obstruction and try running the belt again. If the belt continues to jam

KM-ASSYM2-06

38

M7037

M7037-The discharging operation of the rear buffer conveyor belt times out, please check whether there is any jamming between the upper and lower reaches of the machine

Organizational Abnormality

M7037 error occurs when the discharging operation of the rear buffer conveyor belt times out and there is jamming between the upper and lower reaches of the machine. The solution is to clear any jamming in the machine, ensuring

KM-ASSYM2-06

39

M7038

M7038-The work area blocking cylinder is rising abnormally (X33), please check whether the cylinder is stuck when rising

Organizational Abnormality

The solution for the error M7038-The work area blocking cylinder is rising abnormally (X33) is to check whether the cylinder is stuck when rising. If it is, the cylinder may need to be

KM-ASSYM2-06

40

M7039

M7039-The work area blocking cylinder is abnormally descending (X34), please check whether the cylinder is stuck when descending

Organizational Abnormality

The solution for the M7039 error is to manually lower the cylinder and verify that it moves freely. If the cylinder only moves when lowered, it may be stuck and the maintenance team should be consulted for further investigation and repair

KM-ASSYM2-06

41

M7040

M7040-The jacking cylinder in the work area rises abnormally (X31), please check whether the cylinder is stuck when rising

Organizational Abnormality

There are several possible reasons for M7040-The jacking cylinder in the work area rises abnormally. One cause could be a stuck cylinder, which could be due to pressure buildup or debris blocking the cylinder

KM-ASSYM2-06

42

M7041

M7041-The lifting cylinder in the work area is abnormally descending (X32), please check whether the cylinder is stuck when descending

Organizational Abnormality

The solution for the M7041-The lifting cylinder in the work area is abnormally descending (X32) error is to check if the cylinder is stuck when descending. If it is stuck, the cyl

KM-ASSYM2-06

43

M7042

M7042-The conveyor belt width adjustment cylinder extends abnormally (X27), please check whether the cylinder is stuck when it rises

Organizational Abnormality

The solution for the M7042 error described as "The conveyor belt width adjustment cylinder extends abnormally (X27)" is to check whether the cylinder is stuck when it rises. If the cylinder is

KM-ASSYM2-06

44

M7043

M7043-Conveyor belt width adjustment cylinder retracts abnormally (X30), please check whether the cylinder is stuck when descending

Organizational Abnormality

The solution for M7043 errors related to the conveyor belt width adjustment cylinder retracting abnormally (X30) involves checking whether the cylinder is stuck during descent. This issue can cause damage to the convey

KM-ASSYM2-06

54

M7053

M7053-The current glue amount is too much, please reduce it

Electronic control abnormality

Reduce the current glue amount by using less adhesive, replacing damaged parts, or adjusting the bonding process to ensure proper adhesion. In some cases, the use of a different type of adhesive or solvent may

KM-ASSYM2-06

55

M7054

M7054-The current dispensing amount is too small, please increase

Electronic control abnormality

The error M7054 usually occurs when the dispensing amount is less than the minimum amount required. To solve this error, you need to increase the dispensing amount by adjusting the settings on your printer or using a different ink cartr

KM-ASSYM2-06

65

M7064

M7064-X-axis servo NO readly(X14)&ERROR, please check whether the X-axis servo driver is abnormal

Electronic control abnormality

The solution to the M7064-X-axis servo NO readly(X14)&ERROR error is to check the abnormality of the X-axis servo driver. You can do this by examining the logs

KM-ASSYM2-06

66

M7065

M7065-The right limit of the X-axis is abnormal, close to the origin end (X7), please check whether the slide table touches the limit

Electronic control abnormality

The solution for the M7065 error is to check if the slide table is touching the limit at the origin end (X7) and increase the left limit value if necessary to prevent the issue.

KM-ASSYM2-06

68

M7067

M7067-X axis return to origin time has timed out, please check whether the slide table is abnormal or stuck

Electronic control abnormality

The error M7067 typically occurs when the X-axis slide table times out during its return to origin movement. This could be due to a malfunctioning actuator, a stuck slide table, or a problem with the home position

KM-ASSYM2-06

69

M7068

M7068-Y-axis servo NO readly(X15)&ERROR, please check whether the X-axis servo driver is abnormal

Electronic control abnormality

The error M7068-Y-axis servo NO readly(X15)&ERROR usually indicates that there is a failure in the communication between the X-axis servo driver and the printer. To solve the problem, it

KM-ASSYM2-06

71

M7070

M7070-Y axis rear limit is abnormal, far away from the origin end (X10), please check whether the slide table touches the limit

Electronic control abnormality

The solution to the M7070-Y axis rear limit abnormal issue is to check if the slide table is touching the limit or if it has moved too far from the origin end (X10). If the slide table is touching

KM-ASSYM2-06

72

M7071

M7071-Y axis return to origin time has timed out, please check whether the slide table is abnormal or stuck

Electronic control abnormality

The M7071-Y axis return to origin time has timed out error indicates that the Y-axis slide table is not responding to commands. This can be due to a stuck or abnormal condition. To troubleshoot this issue

KM-ASSYM2-06

73

M7072

M7072-Z-axis servo NO readly(X16)&ERROR, please check whether the Z-axis servo driver is abnormal

Electronic control abnormality

The error M7072-Z-axis servo NO ready(X16)&ERROR suggests that there might be an issue with the Z-axis servo driver. The solution for this issue is to check the Z-axis serv