zashwanth/DummyData · Datasets at Hugging Face

input stringlengths 20 151	output stringlengths 1 464
What is the service being offered?	The service being offered is AT&T Dedicated Fiber Internet.
Who is the service presented to?	The service is presented to Bastrop BP3.
What is the monthly recurring charges for the service?	The monthly recurring charges vary depending on the description, but for the Dedicated Fiber - 100Mbps x 100Mbps (Port and Access Price), it is $807.00.
What are the one-time charges for the internet installation?	The one-time charges for internet installation is $0.00.
What is the contract length for the service?	The contract length for the service is 24 months.
Until when is the quote valid?	The quote is valid until 1/19/2022.
What is the cost of the Cisco Meraki MX68 Firewall?	The monthly cost of the Cisco Meraki MX68 Firewall is $78.60, with an optional one-time installation charge of $290 and a configuration charge of $220.
What is the Reactive DDoS Protection?	Reactive DDoS Protection is an insurance policy that will assist you if you fall victim to a DDoS attack. If attacked, you can alert AT&T and they will mitigate the attack for up to 8 hours.
What does the Vulnerability Scanning tool do?	The Vulnerability Scanning tool scans all internal and external IP addresses on your network and generates a detailed report explaining the vulnerabilities found on each one. The report will detail how severe each vulnerability is and provide resources on how to mitigate them.
What does the Enterprise Traffic Protector do?	The Enterprise Traffic Protector protects all outbound traffic and all ports and protocols on your network.
What is the purpose of the firewall service?	The service is designed to mitigate threats that are already active on the network by disabling them from sending traffic outwards to the threat's source.
Are the prices inclusive of any taxes or surcharges?	No, the prices do not include any applicable local, state or federal taxes or surcharges.
Can the rates change?	Yes, the rates are subject to change without notice.
When is the installation interval determined?	The installation interval is determined after the required site survey.
Until when is the quote valid?	The quote is valid until 1/19/2022.
Who is the Client Solutions Executive to contact for questions or orders?	Adriana Tijerina is the Client Solutions Executive to contact for questions or orders.
What is the email address of Adriana Tijerina?	The email address of Adriana Tijerina is [email protected].
What is Adriana Tijerina's contact number?	Adriana Tijerina's contact number is 956.429.5663.
Who is the Technical Sales Consultant to contact for questions or orders?	Jerimy Bryant is the Technical Sales Consultant to contact for questions or orders.
What is the email address of Jerimy Bryant?	The email address of Jerimy Bryant is [email protected].
What is the Contract Id?	2403225
What is the name of the customer's contact person?	Ed Hudson
What is the customer's street address?	613 FM 1209
Who is the AT&T Contact person for notices?	Adriana Tijerina
What is the AT&T MA Reference Number?	eMSA UA III
What is the customer's telephone number?	2056014576
What is the customer's email address?	[email protected]
What is the AT&T PS contract ID?	MIS14344031
What are the services mentioned?	AT&T Dedicated Internet (ADI), AT&T Bandwidth Services, AT&T Wi-Fi Services
What is the AT&T contact's telephone number?	9564295663
What is the Pricing Schedule Term for AT&T Business Wi-Fi?	The Pricing Schedule Term for AT&T Business Wi-Fi is 24 months.
When does the Pricing Schedule Term start?	The Pricing Schedule Term starts from the Effective Date of this Pricing Schedule.
When are the Rates and Discounts effective?	The rates and discounts are effective from the date of this Pricing Schedule.
What is the minimum payment period for AT&T Business Wi-Fi?	The minimum payment period is longer of 12 months or until the end of the Pricing Schedule Term.
What percent of Monthly Service Fees are due upon termination before completion of the minimum payment period?	50% of Monthly Service Fees are due upon termination before completion of the minimum payment period.
Who is responsible for interference or service degradation caused by or to third-party Wi-Fi services at the Sites?	AT&T is not responsible for interference or service degradation caused by or to third-party Wi-Fi services at the Sites.
How is the AT&T Business Wi-Fi with Cisco Meraki provided?	The AT&T Business Wi-Fi with Cisco Meraki is provided on an 'As-Is' basis.
Does AT&T offer any warranties or guarantees for their Business Wi-Fi with Cisco Meraki?	No, AT&T specifically disclaims any representations, warranties, and service or performance guarantees or levels for their Business Wi-Fi with Cisco Meraki.
Does AT&T have any duty to defend, indemnify, or hold harmless customers from any infringements or misappropriations of intellectual property?	No, AT&T has no duty to defend, indemnify, or hold harmless customers from any infringements or misappropriations of intellectual property.
Who has provided the preliminary Site list for the AT&T Business Wi-Fi service?	The customer has provided the preliminary Site list for the AT&T Business Wi-Fi service.
What equipment will be used according to the text?	The text does not specify what equipment will be used. It mentions that AT&T may modify a preliminary list of equipment based on the results of the AT&T Site Survey, Service Component inventory, and system design.
What happens if the customer does not agree to the modifications proposed by AT&T?	If the Customer does not agree to the modifications, AT&T may refuse to provision Service at the applicable Site.
What can the customer do within thirty days of receiving notice of necessary modifications from AT&T?	Within thirty days of receiving notice from AT&T describing the necessary modifications, the Customer may terminate Service only at the applicable Site, subject to payment of applicable termination charges.
What are the terms of intellectual property according to the text?	AT&T grants the Customer a limited, non-exclusive, non-transferable license to use the Service during the Term solely in connection with the receipt of the Service. All rights, title, and interest in and to intellectual property related to the Service are owned by AT&T, its Affiliates, or AT&T's licensors, suppliers, subcontractors or vendors.
Does the customer gain any ownership rights from the use of the Service?	No, the customer's possession, access, or use of any part of the Service does not transfer any ownership rights or any intellectual property rights from AT&T, its Affiliates or AT&T's licensors, suppliers, subcontractors or vendors to the Customer.
What does the customer represent and warrant according to the privacy terms and conditions?	The customer represents and warrants that it has appropriate rights to provide End User data, which may include Customer Personal Data, to AT&T in connection with the Service.
For what purpose does the customer grant AT&T permission to access information?	The customer grants AT&T permission to access information contained in application layer 7 for the sole purpose of managing the performance.
What happens if a customer terminates the service at a specific site?	If a customer terminates the service at a specific site, they are subject to payment of applicable termination charges. No other sites are affected by this termination.
Who owns the intellectual property related to the Service?	The intellectual property related to the Service is owned by AT&T, its Affiliates, or AT&T's licensors, suppliers, subcontractors or vendors.
What license does AT&T grant to the customer?	AT&T grants the customer a limited, non-exclusive, non-transferable license to use the Service during the Term solely in connection with the receipt of the Service.
What actions will AT&T perform to analyze and troubleshoot network issues?	AT&T will perform real time packet capture from time to time to analyze and troubleshoot network issues.
What permission does the Customer grant to AT&T?	The Customer grants AT&T permission to perform real time packet capture operations for short intervals as necessary for network management purposes.
For what purposes will AT&T use or monitor End User data shared with it?	AT&T will use or monitor End User data shared with it only for network management purposes and for providing metrics reports, consistent with the AT&T Privacy Policy.
What protocols will AT&T establish regarding data retention?	AT&T will establish data retention protocols so that it retains data shared with it for as long as reasonably necessary for network management purposes.
For what purposes can the Customer use or monitor End User data made available through the network management function of the Service?	The Customer can use or monitor End User data made available through the network management function of the Service only for network management purposes, unless it secures additional consent from End Users, or has another lawful basis for processing the data.
What are the obligations of the Customer in relation to the processing or use of End User data?	The Customer must obtain and maintain any and all legally required employee or End User consents, or establish other lawful bases, for the processing or use of End User data.
What types of consents does the Customer need to obtain?	The Customer needs to obtain multiple consents for distinct purposes, and proposed combinations of personal data, even if supplemental software/technology is required.
What should the Customer present to the End User?	The Customer should present the End User with the Customer’s terms of service and applicable privacy policy.
What data retention protocols should the Customer establish?	The Customer should establish data retention protocols so that data it processes is retained for no longer than is reasonably necessary for network management purposes.
What actions is the Customer prohibited from doing?	The Customer is prohibited from accessing, using, or sharing content of communications, content of email or texts, content of shopping carts, or search term queries, etc., and from attempting to re-identify anonymized data.
Who is responsible for the way the data is used?	The Customer is responsible for the way the data is used by them and their employees, guests, and representatives.
What law must the customer comply with when collecting personal information from children under the age of thirteen?	The customer must comply with the federal Children’s Online Privacy Protection Act.
What technology does the service allow the customer to use to collect an End User’s location?	The service allows the customer to use Bluetooth Low Energy (BLE) and Wi-Fi based location technologies to collect an End User’s location.
What must the customer comply with when using the location technologies?	The customer must comply with various U.S. and international laws and regulations, including those promulgated by the Federal Trade Commission and other industry regulators.
Can the customer provide or sell location data to third parties?	The customer cannot provide or sell location data to third parties without AT&T’s prior written authorization.
How is the collection and use of location information different from GPS?	The collection and use of location information with this service is different from GPS or other technologies because it uses Bluetooth Low Energy (BLE) and Wi-Fi based location technologies.
What may the customer be required to do depending on how they collect or use the service?	The customer may be required to provide notice, obtain opt-in consents, or provide periodic reminders, all separate from providing terms and conditions to End Users.
What is the AT&T PS Contract ID?	The AT&T PS Contract ID is MIS14344031.
What is the AT&T MA Reference No.?	The AT&T MA Reference No. is eMSA UA III.
What is the Contract Id?	The Contract Id is 2403225.
What is required from the Customer if they buy products or services that allow them to know when an End User is at their Site(s)?	If the Customer purchases such products or services, they may need to provide separate notices, obtain separate opt-in consents, or provide periodic reminders. These requirements are separate from terms and conditions.
Can the Customer use AT&T’s name, brand, or mark with third parties or End Users in connection with the Service?	No, the Customer may not use AT&T’s name, brand, or mark with third-parties or End Users in connection with the Service without AT&T’s written consent.
What is the Monthly Recurring Charge for the Undiscounted ADI with a Managed Router NRC at an Ethernet speed of 100.00%?	The Monthly Recurring Charge for the Undiscounted ADI with a Managed Router NRC at an Ethernet speed of 100.00% is $1,500.00.
What is the Non-Recurring Charge for the Undiscounted ADI with a Managed Router NRC at an Ethernet speed of 100.00%?	The Non-Recurring Charge for the Undiscounted ADI with a Managed Router NRC at an Ethernet speed of 100.00% is $1,500.00.
What are some of the available Bandwidth Speed levels?	Some of the available Bandwidth Speed levels include 10 Mbps, 20 Mbps, 50 Mbps, 100 Mbps, 150 Mbps, 250 Mbps, 400 Mbps, 500 Mbps, 600 Mbps, and 1000 Mbps.
What is the Undiscounted Monthly Recurring Charge for the 1000 Mbps Ethernet speed?	The Undiscounted Monthly Recurring Charge for the 1000 Mbps Ethernet speed is $4,505.00.
What is the discount percentage for the 1000 Mbps Ethernet speed offered Nation Wide?	The discount percentage for the 1000 Mbps Ethernet speed offered Nation Wide is 85.00%.
What is the Undiscounted Monthly Recurring Charge for the 500 Mbps Ethernet speed?	The Undiscounted Monthly Recurring Charge for the 500 Mbps Ethernet speed is $3,500.00.
What is the discount percentage for the 500 Mbps Ethernet speed offered Nation Wide?	The discount percentage for the 500 Mbps Ethernet speed offered Nation Wide is 87.00%.
What is the Undiscounted Monthly Recurring Charge for the 150 Mbps Ethernet speed?	The Undiscounted Monthly Recurring Charge for the 150 Mbps Ethernet speed is $1,800.00.
What is the third percentage value for Atlanta?	93.00%
What is the highest percentage value for Austin?	93.00%
What is the lowest percentage value for Birmingham?	82.00%
What is the fifth percentage value for Charlotte?	88.00%
What is the last percentage value for Chicago?	87.00%
What is the second last percentage value for Cleveland?	85.00%
What is the fourth percentage value for Columbus?	87.00%
What is the seventh percentage value for Dallas?	85.00%
What is the sixth percentage value for Detroit?	86.00%
What is the ninth percentage value for Houston?	85.00%
What is the ROME ID mentioned in the document?	1-HG5ABXK
What is the AT&T Solution No. as mentioned in the text?	FMO640117872602
What is the Rate ID in the document?	ADIx-122121
What is the Contract Id as per the text?	2403225
What is the AT&T MA Reference No.?	eMSA UA III
What is the AT&T PS Contract ID?	MIS14344031
What is the undiscounted MRC for 1000 Mbps bandwidth speed?	$5,620.00
What is the discount for 100 Mbps bandwidth speed in Austin?	87.00%
What is the discount by zone for 10 Mbps in San Francisco?	82.00%
What is the nation wide discount for 500 Mbps bandwidth speed?	87.00%

What is the service being offered?

The service being offered is AT&T Dedicated Fiber Internet.

Who is the service presented to?

The service is presented to Bastrop BP3.

What is the monthly recurring charges for the service?

The monthly recurring charges vary depending on the description, but for the Dedicated Fiber - 100Mbps x 100Mbps (Port and Access Price), it is $807.00.

What are the one-time charges for the internet installation?

The one-time charges for internet installation is $0.00.

What is the contract length for the service?

The contract length for the service is 24 months.

Until when is the quote valid?

The quote is valid until 1/19/2022.

What is the cost of the Cisco Meraki MX68 Firewall?

The monthly cost of the Cisco Meraki MX68 Firewall is $78.60, with an optional one-time installation charge of $290 and a configuration charge of $220.

What is the Reactive DDoS Protection?

Reactive DDoS Protection is an insurance policy that will assist you if you fall victim to a DDoS attack. If attacked, you can alert AT&T and they will mitigate the attack for up to 8 hours.

What does the Vulnerability Scanning tool do?

The Vulnerability Scanning tool scans all internal and external IP addresses on your network and generates a detailed report explaining the vulnerabilities found on each one. The report will detail how severe each vulnerability is and provide resources on how to mitigate them.

What does the Enterprise Traffic Protector do?

The Enterprise Traffic Protector protects all outbound traffic and all ports and protocols on your network.

What is the purpose of the firewall service?

The service is designed to mitigate threats that are already active on the network by disabling them from sending traffic outwards to the threat's source.

Are the prices inclusive of any taxes or surcharges?

No, the prices do not include any applicable local, state or federal taxes or surcharges.

Can the rates change?

Yes, the rates are subject to change without notice.

When is the installation interval determined?

The installation interval is determined after the required site survey.

Until when is the quote valid?

The quote is valid until 1/19/2022.

Who is the Client Solutions Executive to contact for questions or orders?

Adriana Tijerina is the Client Solutions Executive to contact for questions or orders.

What is the email address of Adriana Tijerina?

The email address of Adriana Tijerina is [email protected].

What is Adriana Tijerina's contact number?

Adriana Tijerina's contact number is 956.429.5663.

Who is the Technical Sales Consultant to contact for questions or orders?

Jerimy Bryant is the Technical Sales Consultant to contact for questions or orders.

What is the email address of Jerimy Bryant?

The email address of Jerimy Bryant is [email protected].

What is the Contract Id?

2403225

What is the name of the customer's contact person?

Ed Hudson

What is the customer's street address?

613 FM 1209

Who is the AT&T Contact person for notices?

Adriana Tijerina

What is the AT&T MA Reference Number?

eMSA UA III

What is the customer's telephone number?

2056014576

What is the customer's email address?

[email protected]

What is the AT&T PS contract ID?

MIS14344031

What are the services mentioned?

AT&T Dedicated Internet (ADI), AT&T Bandwidth Services, AT&T Wi-Fi Services

What is the AT&T contact's telephone number?

9564295663

What is the Pricing Schedule Term for AT&T Business Wi-Fi?

The Pricing Schedule Term for AT&T Business Wi-Fi is 24 months.

When does the Pricing Schedule Term start?

The Pricing Schedule Term starts from the Effective Date of this Pricing Schedule.

When are the Rates and Discounts effective?

The rates and discounts are effective from the date of this Pricing Schedule.

What is the minimum payment period for AT&T Business Wi-Fi?

The minimum payment period is longer of 12 months or until the end of the Pricing Schedule Term.

What percent of Monthly Service Fees are due upon termination before completion of the minimum payment period?

50% of Monthly Service Fees are due upon termination before completion of the minimum payment period.

Who is responsible for interference or service degradation caused by or to third-party Wi-Fi services at the Sites?

AT&T is not responsible for interference or service degradation caused by or to third-party Wi-Fi services at the Sites.

How is the AT&T Business Wi-Fi with Cisco Meraki provided?

The AT&T Business Wi-Fi with Cisco Meraki is provided on an 'As-Is' basis.

Does AT&T offer any warranties or guarantees for their Business Wi-Fi with Cisco Meraki?

No, AT&T specifically disclaims any representations, warranties, and service or performance guarantees or levels for their Business Wi-Fi with Cisco Meraki.

Does AT&T have any duty to defend, indemnify, or hold harmless customers from any infringements or misappropriations of intellectual property?

No, AT&T has no duty to defend, indemnify, or hold harmless customers from any infringements or misappropriations of intellectual property.

Who has provided the preliminary Site list for the AT&T Business Wi-Fi service?

The customer has provided the preliminary Site list for the AT&T Business Wi-Fi service.

What equipment will be used according to the text?

The text does not specify what equipment will be used. It mentions that AT&T may modify a preliminary list of equipment based on the results of the AT&T Site Survey, Service Component inventory, and system design.

What happens if the customer does not agree to the modifications proposed by AT&T?

If the Customer does not agree to the modifications, AT&T may refuse to provision Service at the applicable Site.

What can the customer do within thirty days of receiving notice of necessary modifications from AT&T?

Within thirty days of receiving notice from AT&T describing the necessary modifications, the Customer may terminate Service only at the applicable Site, subject to payment of applicable termination charges.

What are the terms of intellectual property according to the text?

AT&T grants the Customer a limited, non-exclusive, non-transferable license to use the Service during the Term solely in connection with the receipt of the Service. All rights, title, and interest in and to intellectual property related to the Service are owned by AT&T, its Affiliates, or AT&T's licensors, suppliers, subcontractors or vendors.

Does the customer gain any ownership rights from the use of the Service?

No, the customer's possession, access, or use of any part of the Service does not transfer any ownership rights or any intellectual property rights from AT&T, its Affiliates or AT&T's licensors, suppliers, subcontractors or vendors to the Customer.

What does the customer represent and warrant according to the privacy terms and conditions?

The customer represents and warrants that it has appropriate rights to provide End User data, which may include Customer Personal Data, to AT&T in connection with the Service.

For what purpose does the customer grant AT&T permission to access information?

The customer grants AT&T permission to access information contained in application layer 7 for the sole purpose of managing the performance.

What happens if a customer terminates the service at a specific site?

If a customer terminates the service at a specific site, they are subject to payment of applicable termination charges. No other sites are affected by this termination.

Who owns the intellectual property related to the Service?

The intellectual property related to the Service is owned by AT&T, its Affiliates, or AT&T's licensors, suppliers, subcontractors or vendors.

What license does AT&T grant to the customer?

AT&T grants the customer a limited, non-exclusive, non-transferable license to use the Service during the Term solely in connection with the receipt of the Service.

What actions will AT&T perform to analyze and troubleshoot network issues?

AT&T will perform real time packet capture from time to time to analyze and troubleshoot network issues.

What permission does the Customer grant to AT&T?

The Customer grants AT&T permission to perform real time packet capture operations for short intervals as necessary for network management purposes.

For what purposes will AT&T use or monitor End User data shared with it?

AT&T will use or monitor End User data shared with it only for network management purposes and for providing metrics reports, consistent with the AT&T Privacy Policy.

What protocols will AT&T establish regarding data retention?

AT&T will establish data retention protocols so that it retains data shared with it for as long as reasonably necessary for network management purposes.

For what purposes can the Customer use or monitor End User data made available through the network management function of the Service?

The Customer can use or monitor End User data made available through the network management function of the Service only for network management purposes, unless it secures additional consent from End Users, or has another lawful basis for processing the data.

What are the obligations of the Customer in relation to the processing or use of End User data?

The Customer must obtain and maintain any and all legally required employee or End User consents, or establish other lawful bases, for the processing or use of End User data.

What types of consents does the Customer need to obtain?

The Customer needs to obtain multiple consents for distinct purposes, and proposed combinations of personal data, even if supplemental software/technology is required.

What should the Customer present to the End User?

The Customer should present the End User with the Customer’s terms of service and applicable privacy policy.

What data retention protocols should the Customer establish?

The Customer should establish data retention protocols so that data it processes is retained for no longer than is reasonably necessary for network management purposes.

What actions is the Customer prohibited from doing?

The Customer is prohibited from accessing, using, or sharing content of communications, content of email or texts, content of shopping carts, or search term queries, etc., and from attempting to re-identify anonymized data.

Who is responsible for the way the data is used?

The Customer is responsible for the way the data is used by them and their employees, guests, and representatives.

What law must the customer comply with when collecting personal information from children under the age of thirteen?

The customer must comply with the federal Children’s Online Privacy Protection Act.

What technology does the service allow the customer to use to collect an End User’s location?

The service allows the customer to use Bluetooth Low Energy (BLE) and Wi-Fi based location technologies to collect an End User’s location.

What must the customer comply with when using the location technologies?

The customer must comply with various U.S. and international laws and regulations, including those promulgated by the Federal Trade Commission and other industry regulators.

Can the customer provide or sell location data to third parties?

The customer cannot provide or sell location data to third parties without AT&T’s prior written authorization.

How is the collection and use of location information different from GPS?

The collection and use of location information with this service is different from GPS or other technologies because it uses Bluetooth Low Energy (BLE) and Wi-Fi based location technologies.

What may the customer be required to do depending on how they collect or use the service?

The customer may be required to provide notice, obtain opt-in consents, or provide periodic reminders, all separate from providing terms and conditions to End Users.

What is the AT&T PS Contract ID?

The AT&T PS Contract ID is MIS14344031.

What is the AT&T MA Reference No.?

The AT&T MA Reference No. is eMSA UA III.

What is the Contract Id?

The Contract Id is 2403225.

What is required from the Customer if they buy products or services that allow them to know when an End User is at their Site(s)?

If the Customer purchases such products or services, they may need to provide separate notices, obtain separate opt-in consents, or provide periodic reminders. These requirements are separate from terms and conditions.

Can the Customer use AT&T’s name, brand, or mark with third parties or End Users in connection with the Service?

No, the Customer may not use AT&T’s name, brand, or mark with third-parties or End Users in connection with the Service without AT&T’s written consent.

What is the Monthly Recurring Charge for the Undiscounted ADI with a Managed Router NRC at an Ethernet speed of 100.00%?

The Monthly Recurring Charge for the Undiscounted ADI with a Managed Router NRC at an Ethernet speed of 100.00% is $1,500.00.

What is the Non-Recurring Charge for the Undiscounted ADI with a Managed Router NRC at an Ethernet speed of 100.00%?

The Non-Recurring Charge for the Undiscounted ADI with a Managed Router NRC at an Ethernet speed of 100.00% is $1,500.00.

What are some of the available Bandwidth Speed levels?

Some of the available Bandwidth Speed levels include 10 Mbps, 20 Mbps, 50 Mbps, 100 Mbps, 150 Mbps, 250 Mbps, 400 Mbps, 500 Mbps, 600 Mbps, and 1000 Mbps.

What is the Undiscounted Monthly Recurring Charge for the 1000 Mbps Ethernet speed?

The Undiscounted Monthly Recurring Charge for the 1000 Mbps Ethernet speed is $4,505.00.

What is the discount percentage for the 1000 Mbps Ethernet speed offered Nation Wide?

The discount percentage for the 1000 Mbps Ethernet speed offered Nation Wide is 85.00%.

What is the Undiscounted Monthly Recurring Charge for the 500 Mbps Ethernet speed?

The Undiscounted Monthly Recurring Charge for the 500 Mbps Ethernet speed is $3,500.00.

What is the discount percentage for the 500 Mbps Ethernet speed offered Nation Wide?

The discount percentage for the 500 Mbps Ethernet speed offered Nation Wide is 87.00%.

What is the Undiscounted Monthly Recurring Charge for the 150 Mbps Ethernet speed?

The Undiscounted Monthly Recurring Charge for the 150 Mbps Ethernet speed is $1,800.00.

What is the third percentage value for Atlanta?

93.00%

What is the highest percentage value for Austin?

93.00%

What is the lowest percentage value for Birmingham?

82.00%

What is the fifth percentage value for Charlotte?

88.00%

What is the last percentage value for Chicago?

87.00%

What is the second last percentage value for Cleveland?

85.00%

What is the fourth percentage value for Columbus?

87.00%

What is the seventh percentage value for Dallas?

85.00%

What is the sixth percentage value for Detroit?

86.00%

What is the ninth percentage value for Houston?

85.00%

What is the ROME ID mentioned in the document?

1-HG5ABXK

What is the AT&T Solution No. as mentioned in the text?

FMO640117872602

What is the Rate ID in the document?

ADIx-122121

What is the Contract Id as per the text?

2403225

What is the AT&T MA Reference No.?

eMSA UA III

What is the AT&T PS Contract ID?

MIS14344031

What is the undiscounted MRC for 1000 Mbps bandwidth speed?

$5,620.00

What is the discount for 100 Mbps bandwidth speed in Austin?

87.00%

What is the discount by zone for 10 Mbps in San Francisco?

82.00%

What is the nation wide discount for 500 Mbps bandwidth speed?

87.00%