text
stringlengths 52
1.97M
|
|---|
<s> The people go about it and wonder at its beauty, but say: 'Would that this brick be put in its place!' So I am that brick, and I am the seal of the </s> |
<s> [...] he's not going to walk up there and hit a home run for you. If you can't win a game with a home run, you have to be able to do the little things."
Of Gerber's defensive performance in spring training, </s> <s> Gerber entered the game as a pinch runner in the bottom of the ninth inning with the Angels losing, 3-1. Gerber scored to tie the game in what would turn out to be a 4-3 </s> <s> That's good for me because I'm pretty much up there swinging, because I'm not in there every day."
End of playing career
Gerber did not return to the Angels in 1986, with </s> |
<s> However, the team was forced to retire nine hours into the race, and as they had not completed 60% of the total distance, they were not classified in the final results.
On 16 </s> |
<s> It almost felt like an assignment that I gave to myself. It's not unlike how I normally write from a personal point of view, whether mine or someone else's." The song was released as a single from the film at the Billboard </s> |
<s> However, there is no evidence to support this claim. In fact, pipes were cleaned by being placed in iron cradles and baked in ovens. Examples of such clay pipes can be seen at the historic Fort </s> |
<s> I might see my best friend run in there, get the mail, and out. They don't chat. I like it like that."
Work
Quilting in Gee's Bend was both a means for survival and community </s> |
<s> He has always been a music fanatic and tries to come up with new ideas. He blames the lack of proper recognition of music as a separate 'industry', as the reason for its limited success. </s> |
<s> Yet, the skin is extremely tough, which most likely protects them from the ants upon which they feed. Directly behind the eyes, resting on the toads neck, is a distinctive skin fold evolved for protection from ant bites while feeding.
The color of the toad can change depending on its activities and environment. The colors on its sides are generally faded, but its </s> <s> The members of this species tend to discount dry areas and mountains, though some may live in near desert-like conditions. Adults of this species are tolerant of brackish water so they have been able to </s> <s> Though more rare, they have also been observed to call while floating in the water with their fore limbs resting on stem or twig. Many times, they will also extend their hind limbs. They can also call the female while sitting on a bank, or on rainy nights while buried in the damp sand with only their head and vocal </s> <s> In general, the males move more than the females. These toads are mainly nocturnal, and generally remain under ground or hidden in debris during the day.
A few species reported to prey on eastern narrow- </s> |
<s> 23\% & 0.02\% & 13.41\% & 2.33\% & 1.84\% & 1.37\%\\
AS & 95.42\% & 0.03\% & 65.98\% & 1.09\% & 2.36\% & 1.81\%\\
SIR & 97.87\% & 0.01\% & 56.97\% & 2.91\% & 2.61\% & 1.99\%\\
\ </s> <s> 61\% & 0.01\% & 8.54\% & 2.11\% & 3.11\% & 2.83\%\\
AS & 81.64\% & 0.001\% & 47.52\% & 15.73\%& 29.59\% & 28.42\% \\
SIR & 76.53\% & 0.002\% & 49.34\% & 15.11\%& 29.67\% & 28.11\% \\
\ </s> <s> 79\% & 0.001\% & 13.36\% & 4.32\% & 3.04\% & 3.12\% \\
AS & 66.64\% & 0.002\% & 39.73\% & 3.38\% & 6.21\% & 3.32\% \\
SIR & 80.91\% & 0.112\% & 28.17\% & 9.85\% & 2.91\% & 4.19\% \\
\ </s> <s> 93\% & 0.001\% & 10.63\% & 1.43\% & 6.74\% & 4.76\% \\
AS & 60.47\% & 0.002\% & 24.54\% & 4.02\% & 18.65\% & 13.94\% \\
SIR & 72.45\% & 0.002\% & 35.23\% & 4.66\% & 19.08\% & 12.84\% \\
\ </s> <s> 68 & 1.0 & 0.12 & 0.011 & 0.075 & 0.036 & 0.024 & 0.018\\
AS & 1.0 & 0.41 & 0.22 & 0.20 & 0.20 & 0.17 & 0.15 & 0.15\\
SIR & 1.0 & 0.21 & 0.18 & 0.16 & 0.13 & 0.14 & 0.12 & 0.16\\
\ </s> <s> 18\% & 0.02\% & 11.96\% & 5.13\% & 2.51\% & 2.17\% \\
AS & 58.89\% & 0.13\% & 47.27\% & 19.11\% & 3.05\% & 2.91\% \\
SIR & 65.34\% & 0.21\% & 54.99\% & 22.52\% & 3.32\% & 3.21\% \\
\ </s> |
<s> The cases of $n=0.90$, $n=0.50$ and $n=0.30$, all
obtained for $U=5D$, are shown with the same scale. The full and dashed black lines are </s> |
<s> Among the various reasons given by mission or review boards not to support the selection of microphones on missions to Mars, one comes back very often: many scientists believe that a Mars microphone would record hardly anything, due to the combination of low pressure of the atmosphere and of the expected </s> <s> In order to assess the potential of sound recordings on Mars, and build a science focused Mars microphone, we have, therefore, chosen to use a double approach: design an instrument based on these analytical </s> |
<s> \end{equation}
We will show that both the terms in the right hand side of the above equation will go to $0$. The proof will follow a series of steps.
\begin{step} For any $\ </s> |
<s> 444 & 0.629 & 0.520 & 0.426 & 0.622 & 0.506 & 0.452 & 0.653 & 0.534 \\
\te & 0.518 & 0.735 & 0.608 & 0.493 & 0.719 & 0.585 & 0.492 & 0.710 & 0.581 \\
\ </s> <s> 508 & 0.720 & 0.596 & 0.525 & 0.766 & 0.623 & 0.618 & 0.892 & 0.730 \\
\re & 0.518 & 0.735 & 0.608 & 0.548 & 0.799 & 0.650 & 0.646 & 0.933 & 0.764 \\
\ </s> |
<s> 0264 & 4540 & 0.00787 & 9 & 11 \\
& 5:6 & 0.0341 & 2921 & 0.00506 & 8 & 9 \\
& 4:5 & 0.0385 & 1737 & 0.00301 & 5 & 7 \\
& 3:4 & 0.0408 & 920.3 & 0.00159 & 4 & 5 \\
\ </s> <s> 0268 & 4646 & 0.00876 & 10 & 11 \\
& 5:6 & 0.0353 & 3026 & 0.00571 & 8 & 9 \\
& 4:5 & 0.0403 & 1792 & 0.00338 & 5 & 7 \\
& 3:4 & 0.0430 & 989.0 & 0.00187 & 4 & 5 \\
\ </s> <s> 0209 & 4713 & 0.0144 & 9 & 11 \\
& 5:6 & 0.0346 & 2982 & 0.00911 & 7 & 9 \\
& 4:5 & 0.0425 & 1757 & 0.00537 & 5 & 7\\
& 3:4 & 0.0466 & 935.4 & 0.00286 & 4 & 5 \\
& 2:3 & 0.0531 & n/a & n/a & n/a & n/a \\
\ </s> <s> 0184 & n/a & n/a & n/a & n/a \\
& 5:6 & 0.0301 & 3088 & 0.00814 & 7 & 9 \\
& 4:5 & 0.0379 & 1821 & 0.00480 & 6 & 7 \\
& 3:4 & 0.0416 & 964.9 & 0.00254 & 4 & 5 \\
\ </s> <s> 0299 & 5048 & 0.00780 & 10 & 12 \\
& 5:6 & 0.0385 & 3253 & 0.00502 & 9 & 10 \\
& 4:5 & 0.0437 & 2076 & 0.00320 & 7 & 8 \\
& 3:4 & 0.0469 & 279.2 & 0.000431 & 1 & 2\\
& 2:3 & 0.0515 & n/a & n/a & n/a & n/a \\
\ </s> <s> 0230 & 5569 & 0.00880 & 11 & 12\\
& 4:5 & 0.0341 & 3817 & 0.00603 & 9 & 11 \\
& 3:4 & 0.0393 & 2182 & 0.00345 & 7 & 8 \\
& 2:3 & 0.0447 & n/a & n/a & n/a & n/a \\
\ </s> <s> 0224 & 5317 & 0.0124 & 11 & 12 \\
& 5:6 & 0.0360 & 3371 & 0.00784 & 8 & 10 \\
& 4:5 & 0.0435 & 1958 & 0.00456 & 7 & 8 \\
& 3:4 & 0.0475 & 954.9 & 0.00222 & 4 & 5\\
& 2:3 & 0.0537 & n/a & n/a & n/a & n/a \\
\ </s> |
<s> \end{description}
In general, there can be a unique solution for none of the problems, just one or both. There might be a unique solution for signal recovery if the model is known, but it might be impossible to learn the model in the first place. For example, this is the case of blind compressed sensing~\ </s> |
<s> new Product("Chicken Patty", 0, 4.00),
new Product("Chicken Special Patty", 0, 5.00),
new Product("Imported Lamb Patty", 0, 8.00),
new Product("Imported Lamb Special Patty", 0, 10.00)
)));
}
private final </s> |
<s> Table
ID Value
1 1
1 2
2 3
2 -4
3 -5
4 6
I want to remove duplicates, keeping only one entry per ID - the one having the largest absolute value of the "value" column. I.e., this is what I want:
Result
ID Value
1 2
2 -4
3 -5
4 6
How might I do this in </s> |
<s> After I have how many directions there are, I need to ask and save each one of those.
What I can't figure out is how to switch which variable I am using and still store the </s> |
<s> Calling it on the second time the file is not found, since the time used in the file name is in the past and you got a most recent time.
You should call the Calendar. </s> |
<s> It;s a really big project with hundreds of files so I could of easily changed it this past week and not realized it now that I see it is a problem.
Below is the most basic example if the Click Event in question. Now I could of easily had it using </s> |
<s> I'm now stuck on what would be the most appropriate package to choose/what I should report. I was hoping for some advice regarding this issue.
I have simulated on my own data but here is example code and table below based on </s> <s> 1 0.05 0.000 NA NA
2 0.10 0.000 NA NA
3 0.15 0.000 NA NA
4 0.20 0.001 NA NA
5 0.25 0.001 NA NA
6 0.30 0.001 NA NA
7 0.35 0.003 NA NA
8 0.40 0.002 NA NA
9 0.45 0.003 NA NA
10 0.50 0.017 NA NA
11 0.55 0.126 0.066 0.066
12 0.60 0.267 0.154 0.154
13 0.65 0.412 0.274 0.274
14 0.70 0.551 0.421 0.420
15 0.75 0.678 0.570 0.570
16 0.80 0.789 0.700 0.700
17 0.85 0.877 0.806 0.805
18 0.90 0.936 0.897 0.897
19 0.95 0.959 0.995 0.995 </s> |
<s> (0,0) -> A
(0,1) -> B
(0,2) -> C
(0,3) -> D
(1,0) -> E
(1,1) -> F
(1,2) -> G
(1,3) -> H
(2,0) -> I
(2,1) -> J
(2,2) -> K
(2,3) -> L
------ </s> <s> (0,0) -> M
(0,1) -> N
(0,2) -> O
(0,3) -> P
(1,0) -> Q
(1,1) -> R
(1,2) -> S
(1,3) -> T
(2,0) -> U
(2,1) -> V
(2,2) -> W
(2,3) -> X </s> |
<s> Is there a way to get around this?
A: The main problem here is that the application is old (from 2012).
You have to provide the name for the man-page which is generated by pod2man (see --name option). </s> |
<s> Then $F$ has level $p^2$. We now take $c=c'p$ for $(c',p)=1$. (We are brief in details and translate everything straight away in the explicit situation at hand!) This hits exactly the hardest case possible. However, our advantage is that we have full information on $\ </s> |
<s> So for instance I have following list
label
4354634
354545
4335435
112121
4865633
....
Goal would be to run through the list & create a folder in a bucket
gs://some-bucket-name/4354634/
gs://some-bucket-name/354545/
gs://some-bucket-name/4335435/
gs://some-bucket-name/112121/
gs://some-bucket-name/4865633/
gs://some-bucket-name/.../
I tried following code but it only gave me certain </s> |
<s> So this is what i have as an example
<li id="tab-4">
<li id="tab-3">
<li id="tab-2">
<li id="tab-1">
And i need to make it
<li id="tab-1">
<li id="tab-2">
<li id="tab-3">
<li id="tab-4">
Is there a fast way to do it? Or I have to do it one by one?
A: I guess you have an < </s> |
<s> Ps <- i ## where i is whatever your Ps is
x[[paste0("element", i)]] <- Ps
}
x
# $element1
# [1] 1
#
# $element2
# [1] 2
#
# $element3
# [1] 3
Although, if you know N beforehand, then it is better practice and more efficient to </s> |
<s> Task is created successfully and is scheduled to run correctly. At scheduled time, it says task is running but without any result and next schedule time is updated.
But last run time and last run result does not update.
Last run result is: The task has not yet run.(0x41303)
But when run manually from task </s> |
<s> Q: Can someone else take my old name after I change it? I am worried that when I change my name during game (using shift>tab>settings), even if for a short while, someone else can take my original name. Is this possible?
A: Technically, they can take your name whenever they want. Your name in Team Fortress 2 </s> |
<s> 392126, 291903, 9238534, 1134273, 1336573, 206360, 951821, 1710973,
1167422, 1036115, 1166813, 2555861, 3884371, 5296953, 8645042,
9590756, 7822902, 15316784, 8917174, 15363, 178564, 10510213,
5918073, 4248987, 149275, 61120, 484839, 794697, 28530)), row.names = c(NA,
-30L), class = c(" </s> |
<s> As if everything works correctly, only the screen is frozen until I close soft input, and then I can see progress.
Why is this happening and how do I fix it?
Closing the keyboard </s> |
<s> How would I make them all move in the same time?
A: If I have understood your situation correctly, one option might be to put the buttons on a container like a </s> <s> <Button Height="50" Width="50" Content="V" />
<Button Height="50" Width="50" Content="I" />
<Button Height="50" Width="50" Content="N" />
<Button Height="50" Width="50" Content="O" />
<Button Height="50" Width="50" Content="D" />
<Button Height="50" Width="50" Content="H" />
</ </s> |
<s> For me, that means Pacific Time, even though my local time zone is Eastern US. Also, the Z you see at the end of the time string in Flow says that time is being shown in </s> |
<s> }
}
(You could also add your whole code directly into action, but that would be a bit ugly solution, it of course depends)
But better and quickest way to approach such tasks is with the </s> |
<s> Q: the select menu does not behave as it is expected I'm new to bash. I want to have a select menu in bash. It has four options. Here is the code:
#!/bin/bash
PS3='Please enter your choice: '
while true; do
clear
options=("Option 1" "Option 2" "Option 3" "Exit")
select </s> |
<s> So I'd have to specifically select an element on the page I guess if I were to do it that way - and I'm not sure how to do that/if it's even possible!
So what would be the best way of going about throwing an error message for the </s> |
<s> Is there a way to just get time, or do I have to put in a date as well?
A: I am not sure "24:00:00" is going to be a valid time. Any how, you should not need to specify the date, you can do... </s> |
<s> Please suggest why is this happening, thanks in advance.
A: You do not need fields.
You want individual ingredients and steps per Recipe.
You may also want to look at Why does my </s> |
<s> the code was not working and returned the input so I changed it to what I think would make it work but have come across this error instead.
string = ""
string2 = ""
length = 0 </s> <s> This works by setting your variable of interest equal to everything up to character x, plus the new character, plus all the characters that were after x.
I hope this helps.
A: Strings are </s> |
<s> Question: Why form still refreshing the page on submit?
Example 2:
<form id="form">
<select>
<option>Option 1</option>
<option>Option 2</option>
</select>
<button type="submit">Submit</button>
</form>
.
$('select').change(function() { </s> |
<s> A: I struggled with this same problem for awhile. It looks like it's been a long time since it was asked but here is what I did to get it to work. Maybe it' </s> |
<s> I'm not aware of this having been written down in so many words anywhere -- but something like it is what I imagine when it is said "it is obvious that such-and-such property is preserved by </s> |
<s> Q: Getting yellow light color on AR model - react-native-ar-viewer Getting yellow light color on AR model in React Native AR application, I am using - react-native-ar-viewer
The actual color of the model is white but getting a light yellow color model
code </s> |
<s> I am using a persistent volume. While mounted in a container, I got an error message that there was no space left on the device. On inspection, the volume size was 256 </s> |
<s> Q: Frame of reference for vertical slicing We have been hearing the concept of 'vertical slicing' a lot lately. I think we have been doing a better job of creating smaller, more well- </s> <s> This means that the customer can't give feedback if there was a misunderstanding and the back-end does not retrieve quite the right information.
As an alternative, you could start with a story for 1 </s> <s> If your team is confident they can deliver both the first front-end and the full back-end in one sprint, then obviously they can skip the stubbed version of the back-end in that case.
In the slicing theory, the story of the </s> <s> The thing to be really careful about is to avoid that the customer starts to think that the stubbed back-end is actually fully functional.
A: I find that when you have many </s> |
<s> Well, actually there are four, joined together with the && operator. You could run each step separately, but you can't divide them in the middle of a command, as you did.
The first two steps probably </s> |
<s> When ordering them the other way (oldest first) it gives the same error - i.e. the order is still incorrect:
I can't understand why this is occurring?
A: Try to change the format to this, according to Moment.js </s> |
<s> To work around this, I'd like to chop the full image into smaller pieces, but I'm not sure how to do that.
I also saw that it was possible to reduce the memory size of the </s> |
<s> If the place is out of bounds, check the dictionary to see if it has a marker and if so, call the remove method on the marker and remove that place from the dictionary.
Then you' </s> |
<s> }
}
A: When you create the action, that is where you set the target position, not in the act method. And there is no need for your act method to handle the action, because that's already built into the Actor </s> |
<s> Series(range(10))
>>> s
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
>>> ((s + s.shift(-1)) / 2)[::2]
0 0.5
2 2.5
4 4.5
6 6.5
8 8.5
The "proper way" I guess would be something like:
>> a = s.index.values
>>> </s> |
<s> *I chose a wrong minimum or maximum pulse width, which breaks them. This could be. I just kept the default values as they were in the example here. But how would I know what are the correct values?
*They are simply really </s> |
<s> *Write some code and save it to an R file
*Select the file > Commit > and Push
and I receive this error, which I was not getting previously. (Note that I took a long break and during this time I have not committed anything to </s> <s> Therefore, I would appreciate if you can just provide me a clean solution on how to solve this problem. Thank you for your attention beforehand.
PS: I am using a Mac if that would matter.
A: This should be linked to the lack of </s> |
<s> Changing it to the true path fixed the problem.
I'm relatively new to Python and am biting off more than I can chew but I don't understand how I keep getting this error in my code. It's just a simple I/O operation on closed file yet I don't know how my file is a closed file, error is derived from the </s> |
<s> However, I don't know how to solve it when the number of unknown weight edges grows larger than 1.
Can anyone figure out how to do this?
A: Can't offer a complete solution, but it looks related to the </s> |
<s> When a negative value is entered, the program should stop asking for new values.
Until here everything works fine. However, the negative value should not be stored in the array. Unfortunately, my array stores negative values too. How could I change the program to make sure negative values are not stored?
for ( </s> |
<s> This off course only gives me the Hours between the two dates. I need the complete values like X Day y hours and z minutes. How can i do this ?
A: Use Period:
Period period = new Period(now, </s> |
<s> 9c-10.7 0-16.1 13-8.5 20.5l114.9 114.3c4.7 4.7 12.2 4.7 16.9 0l114.9-114.3c7.6-7.6 2.2-20.5-8.5-20.5H300V140c0-6.6-5.4-12-12-12h-64c-6.6 0-12 5.4-12 12z"
],
This content, i want to capture with </s> <s> 9c-10.7 0-16.1 13-8.5 20.5l114.9 114.3c4.7 4.7 12.2 4.7 16.9 0l114.9-114.3c7.6-7.6 2.2-20.5-8.5-20.5H300V140c0-6.6-5.4-12-12-12h-64c-6.6 0-12 5.4-12 12z"
I tried with \[(.*?)\] but only capture the empty []
A: In the comments, the </s> <s> 9c-10.7 0-16.1 13-8.5 20.5l114.9 114.3c4.7 4.7 12.2 4.7 16.9 0l114.9-114.3c7.6-7.6 2.2-20.5-8.5-20.5H300V140c0-6.6-5.4-12-12-12h-64c-6.6 0-12 5.4-12 12z"
],
"other-fields": "preserved",
};
delete </s> |
<s> }
}
}
Can anybody tell me, what caused this error?
Note, this only happened one time.
A: Likely because you are sharing the same instance of Random across threads you hit a problem inside the random class as </s> |
<s> <path class="st0" d="M364,334.9c8.1-2.3,16.1-7.9,23.4-14.7c-1.3,7.2,2.1,11.1,8.5,10c7.3-1.2,15.5-9.1,21.9-16.3
c-1.3,7.4,2.9,12.3,11.4,11c11-1.7,23.7-15.5,34.7-30.1l0,0c7.6-9.9,14.2-20.3,19-27.3c-5.3,14.7-2.4,39.1-15.1,41.1
c-4.5,0.7-6.3-3.9-6.3-3.9l-8.3,5.7c0,0,2.4,10.4,14.6,8.4c1.3-0.2,2.4-0.5,3.7-0.8c0.1,0,0.3-0.2,0.4-0.2
c13.6-3.9,27-16.8,37-30.1c-1.7-1.2-3.6-3-5-3.8l-0.9,1.2c-4.9,6.5-10.8,12.6-16,17c4.2-13.3,3.3-32.7,11.5-51l-10-3.8
C483,255.7,471,275,458.9,291l0,0l-0.9,1.2c-9.6,12.7-19,23-24.9,23.9c-2.9,0.5-4.6-1.3-1.5-7.1l28.4-54.3l-13.3,2.1L423,301.9
c-10.1,10.8-17.9,17.2-20.5,16.4c-3.3-0.9,0-6.4,1.7-9.5l26-49.5l-13.3,2.1L396,301l-0.9,1.2c-4.9,6.5-10.8,12.6-16,17
c4.2-13.4,3.3-32.7,11.5-51l-10-3.8c-5.5,8.4-17.5,27.8-29.6,43.8l0,0l-0.9,1.2c-9.6,12.7-19,23-24.9,23.9
c-2.9,0.5-4.6-1.3-1.5-7.1l19.2-36.7c5.8-11,0.3-17.5-7.2-16.3c-5.8,0.9-11.8,4.9-18.4,12.9l5-9.5l-13.3,2.1l-20.9,39.5l-0.9,1.1
c-9.6,12.7-21.9,23.5-31.3,24.9c-8.2,1.3-13.1-3.1-6.9-14.8l1.3-2.5c8.6,2.2,24.7-2,34.7-20.9l1.9-3.6
c7.2-13.4,0.3-21.6-10.6-19.8c-10.8,1.7-19.3,8.7-25,19.3L238.5,326l-0.8,1c-4.9,6.5-10.8,12.6-16,17c4.2-13.4,3.3-32.7,11.5-51
l-10-3.8c-5.5,8.4-17.5,27.8-29.6,43.8l0,0l-0.9,1.2c-9.6,12.7-19,23-24.9,23.9c-2.9,0.5-4.6-1.3-1.5-7.1l19.2-36.7
c5.8-11,0.3-17.5-7.2-16.3c-5.8,0.9-11.8,4.9-18.4,12.9l5-9.5l-13.3,2.1L130.7,343l-0.9,1.1c-6,7.5-13.4,11.9-20.1,13l12.6-23.6
c8.1-15.2,0.6-27.3-11.9-25.3c-10.2,1.6-18.2,7-25.9,21.5L78,342.2L72.2,353c-0.3,0.5-0.5,1-0.7,1.5c-3.4,4.5-7.1,9-9.4,11.1
c-3.8,3.5-18.2,11.7-28.7,8.5C-0.8,363.7,54.2,256.6,79.7,263c7.9,2,8.6,9.9,4.9,14.4c-0.9,1.1-2.2,1.8-3.4,2.4
c-0.2,0.1-0.4,0.2-0.5,0.2l10.4,4.7c0.8-0.7,1.5-1.4,2.3-2.2c9-9.4,6.9-24-3.5-29.8c-38.7-21.5-96.2,81-85.4,119.6
c3.3,11.7,15.7,24.6,34.8,19.1c14.2-4.1,23-12.5,28.6-20.1c2.6,13.9,24.2,12.4,37.7-6.9l2.9-0.5c4-0.6,9.1-2.7,14.2-5.7l-8,15.1
l13.4-2.1l20.4-38.7c20.4-28.7,29.5-26.8,23.7-16l-17.3,32.8c-5.6,10.8-1.7,19.2,9.1,17.5c11-1.7,23.7-15.5,34.7-30.1l0,0
c7.6-9.9,14.2-20.3,19-27.3c-5.3,14.7-2.4,39.1-15.1,41.1c-4.5,0.7-6.3-3.9-6.3-3.9l-8.3,5.7c0,0,2.4,10.4,14.6,8.4
c1.3-0.2,2.4-0.5,3.7-0.8c0.1,0,0.3-0.2,0.4-0.2c9.6-2.8,19.1-10,27.4-18.7c0.4,8.5,7.2,13.6,18.1,11.9c8.4-1.3,16.8-6.3,24.5-13
l-4.5,8.6l13.4-2.1l20.4-38.7c20.4-28.7,29.5-26.8,23.7-16.1l-17.3,32.8c-5.6,10.8-1.7,19.2,9.1,17.5c11-1.7,23.7-15.5,34.7-30.1
l0,0c7.6-9.9,14.2-20.3,19-27.3c-5.3,14.7-2.4,39.1-15.1,41.1c-4.5,0.7-6.3-3.9-6.3-3.9l-8.3,5.7c0,0,2.4,10.4,14.6,8.4
c1.3-0.2,2.4-0.5,3.7-0.8C363.7,335,363.9,334.9,364,334.9 M262.8,303.4c7.7-14.4,21.3-14.4,13.3,0.7l-1.9,3.6
c-6.4,11.9-15,13-20,12L262.8,303.4z M102.3,348.4l-0.6,0.1c-4.4,0.7-7.8,4.8-7.8,9.2c0,1.7,0.5,3.1,1.3,4.3l-0.1,0.3
c-6.3,11.8-21.5,12.1-13.6-3l10.1-19.1l6.4-11.9c9.4-17.4,22.2-13.1,14.1,2L102.3,348.4z"/>
</clipPath>
</defs>
<g>
<polygon xmlns="http://www.w3.org/2000/svg" id="blue" fill="#3BBFED" points="230.5,98 230.5,224.4 345.4,161.2 "/>
<polygon xmlns="http:// </s> <s> 7 94.3,270.7 84.3,256 61,260.3 43.7,281.7 26.7,308 16,332.3 13.3,352 14.7,370.3 24,381.3
44.3,383.3 62.3,370.3 " id="C"/>
< </s> <s> 7,351.3 73,363.7 75.8,373.3 84,376.7 94.3,370.3 102.3,357.3 112.7,341.3 119.7,326 119.7,315
111.7,310.7 99,316 90.7,327 84.7,338 " id="o"/>
< </s> <s> 3,351.5 111.7,360.3 125.3,354.3 138,343.7 147,324 156.7,303.3 121.7,371 152,319.7 165,309
176.3,303.3 183.7,303.3 179.3,317 170,331.3 160.3,349 156.7,359.3 163.7,363.3 177.3,356.3 190.3,343.7 202.7,326.7 217.3,305.7
226,292 226,299.7 221,316.7 217.3,334.7 214.4,348 205.7,356 191.3,352 221,347.3 238.3,334 248,320 257.7,323.3 269,319.7
280.7,305.7 284.7,292 278.3,286.3 266.7,288.7 260,296.3 249,314.3 240,341.7 244.7,350 256,347.3 273.7,339.3 288,328.6
302,304.7 313.7,278 279,346.3 311.7,293 323.7,284 336.7,276 342,281.3 336.7,292.7 327.7,309 319,323.5 314.3,336 324.3,339.3
342,327 356.7,305.3 373.3,281.7 385.7,266.7 379.7,286.7 376.3,304 373,322 366.9,330 357,332 348.3,326 378.7,323.3 400.3,306.7
414,279.7 421.7,261.7 394,320 396.3,325.7 408.3,320 426.3,304 441.7,278.7 451.8,256 422.3,320 431.7,320 444.7,313.5 457.7,297
477,271.7 492.7,250.3 488.3,269.3 483,298.3 478.3,310.7 467.7,314 457.3,309 490.3,302.7 505.3,286.3 " id="rest"/>
</svg> </s> |
<s> The date part seems to work in another stored procedure and I have compared them.. but for the life of me I can't see the difference.
Any help appreciated.
C
A: The error was to do with the number of </s> |
<s> The thing is that I don't like that I have to press Enter to start the program and THEN start writing. I would like to start the program and let the timer set off exactly when I have pressed the first key.
I was thinking if it would be possible to use the first character of the </s> <s> If so, I could solve the problem.
I was wondering if anyone has some kind of advice on how I could do this or just solve the problem.
A: A quick search turned up the </s> |
<s> Pair (a,b) + Pair (c,d) = Pair (a+c,b+d)
Pair (a,b) * Pair (c,d) = Pair (a*c,b*d)
Pair (a,b) - Pair (c,d) = Pair (a-c,b-d) </s> |
<s> Cop N = new Cop();
and then performing a method call
N.rescue();
What is the proper way to add the read in values? Can I use a solution similar to that one? I am trying to get the String </s> <s> }
}
Overall Objective
I realize I haven't added in my overall objective: The purpose is reading in a file to create a new hero (usually only one) and having them save multiple people/things in this hypothetical game. For example, if the file says
c h Rick </s> |
<s> ['8,1,1,0,1,1,0,0'], ['9,0,0,1,0,0,1,0'], ['10,0,0,1,0,0,1,0'],
['11,0,0,0,0,0,0,0'], ['12,0,0,0,0,0,0,0'], ['13,0,0,0,0,0,0,0'],
['14,0,0,0,0,0,0,0'], ['15,0,0,0,0,0,0,0'], ['16,0,0,0,1,0,2,3'],
['17,1,1,2,0,1,1,0'], ['18,1,0,0,2,1,1,2']
]
I have this data of </s> |
<s> My questions in trying to understand this are,
*
*Why does it create a copy? Is it because the argument is not an r-value reference (has a name), and thus cannot be ' </s> |
<s> resources :items, only: [:new, :create, :show, :destroy]
end
get 'welcome/index'
root :to => 'welcome#index'
end
A: I had the similar issue before and below is my solution:
Try to add below line in your item partial:
<li id='#item-' +<%= @item.id %>">
<% @item.each do |item| %>
<%= </s> |
<s> This information would allow me to set the position of another element in another part of the same screen.
I would also know if it is possible to add an event handler on that </s> |
<s> <option title="A" value="1"> A</option>
<option title="B" value="2"> B</option>
<option title="C" value="3"> C</option>
<option title="D" value="4"> D</option>
I tried with below option but unable to locate/select any option.
Select select = new Select(driver. </s> |
<s> There can be several such additional tables, if required. All these tables share the same primary key. Columns that are used together are stored together so one page fetch read all the required values. The advantage is there are more rows per page so </s> |
<s> Q: What is an environment in programming? This may seem like a simple question, but I keep getting caught up in it. The word environment seems to be thrown around a lot, but I can't find a </s> |
<s> </el-table-column>
Can someone please suggest some solution to this issue in the above code? I am stuck on this for while. Would appreciate it.
Thank you.
A: This is a table... So </s> |
<s> (I remember reading somewhere that the number is something around 15, but I'm not sure.) What I'm wondering is how tamed wolves interact with it. For example, take the following scenario: you have 3 </s> <s> If you don't believe me, you can try it. Tame as many wolves as you can (say, 15), then light only one patch of grass at night and walk far enough away for things to spawn
You can camp all day and night and nothing will spawn. The reason why there's no limit to wolves is that you can tame them, make them sit, walk far enough that they </s> |
<s> However, is it possible to add a button to control the slider bar.
What I mean is that can I add a right button. Once I click this right button, the whole </s> <s> And can I make a 'left' button too?
Therefore, if I will go fast I can direct click the Slider bar. Then, If i wanna present it slow, I can just click the button?
Actually, I have read some information about 'button library'. However, I don't know how to use it to update the Slider.
Here is my code </s> <s> Slider.
You can then connect the button to a function forward() or backward() which will set the Slider to a new position.
Here is a complete working example which is hopefully close enough to your's (I did change some stuff though) </s> |
<s> [
[
[
-73.98114904754641,
40.7470284264813
],
[
-73.98314135177611,
40.73416844413217
],
[
-74.00538969848634,
40.734314779027144
],
[
-74.00479214294432,
40.75027851544338
],
[
-73.98114904754641,
40.7470284264813
]
],
[
[
[
-73.99818643920906,
40.74550031602355
],
[
-74.00298643920905,
40.74550031602355
],
[
-74.00058643920897,
40.74810024102966
],
[
-73.99818643920906,
40.74550031602355
]
],
[
[
-73.98917421691903,
40.73646098717515
],
[
-73.99397421691901,
40.73646098717515
],
[
-73.99157421691893,
40.739061265535696
],
[
-73.98917421691903,
40.73646098717515
]
]
]
]
]
}
A: This is how it works:
{
"type": " </s> <s> [
[
[
-47.900390625,
-14.944784875088372
],
[
-51.591796875,
-19.91138351415555
],
[
-41.11083984375,
-21.309846141087192
],
[
-43.39599609375,
-15.390135715305204
],
[
-47.900390625,
-14.944784875088372
]
],
[
[
-46.6259765625,
-17.14079039331664
],
[
-47.548828125,
-16.804541076383455
],
[
-46.23046874999999,
-16.699340234594537
],
[
-45.3515625,
-19.31114335506464
],
[
-46.6259765625,
-17.14079039331664
]
],
[
[
-44.40673828125,
-18.375379094031825
],
[
-44.4287109375,
-20.097206227083888
],
[
-42.9345703125,
-18.979025953255267
],
[
-43.52783203125,
-17.602139123350838
],
[
-44.40673828125,
-18.375379094031825
]
]
]
]
}
A: For your example in fact it's not really a </s> |
<s> 1 1 1 1
2 1 2 0
3 1 3 0
4 2 1 0
5 2 2 0
6 2 3 0
7 3 1 0
8 3 2 1
9 3 3 0
Now I want to create a new </s> <s> 1 1 1 1 3
2 1 2 0 3
3 1 3 0 3
4 2 1 0 0
5 2 2 0 0
6 2 3 0 0
7 3 1 0 3
8 3 2 1 3
9 3 3 0 3
In the simple example above, player "1", had "1" in the first </s> <s> 1 1 1 1 3
2 1 2 0 3
3 1 3 0 3
4 2 1 0 0
5 2 2 0 0
6 2 3 0 0
7 3 1 0 3
8 3 2 1 3
9 3 3 0 3
A: A base R option using ave + </s> <s> 1 1 1 1 3
2 1 2 0 3
3 1 3 0 3
4 2 1 0 0
5 2 2 0 0
6 2 3 0 0
7 3 1 0 3
8 3 2 1 3
9 3 3 0 3
Update
If you criteria is depending on the first two values of choice, you can try
within( </s> <s> 1 1 1 1 0
2 1 2 0 0
3 1 3 0 0
4 2 1 0 0
5 2 2 0 0
6 2 3 0 0
7 3 1 0 0
8 3 2 1 0
9 3 3 0 0
A: There is no reason for this data to be a data.frame. Keep it as a </s> |
<s> test3' = Apply (Composition [Composition (Just (Just 1))])
main :: IO ()
main = do
print test
print test2
print test2'
print test3
print test3'
return ()
UPDATE
This can be done </s> <s> test7= (:[]) . Just . Right . Just $ 1
main :: IO ()
main = do
print test
print test2
print test2'
print test3
print test3'
print test4
print test4'
print test5
print test6
print test7
return () </s> |
<s> I don't know what's the problem? I think my tread has no right access to write in the shared file. but don't know what should I do.
It should work when typed in terminal :
$./a.out <file name> < </s> |
<s> Similar to a library by looking at a package for the type of function your looking for might get you there. For example if I am looking for handling files I might look for the control </s> <s> and might be able to find what I am looking for. Note its not perfect as the way packages are used has changed from time to time so its actually better for finding functions related to for example </s> |
<s> Right now, as seen in these examples, almost nobody even looks for it at all. This is a very big problem.
feature-request- I suggest that we automatically run all the new tag </s> <s> .. I think it's "low quality" posts, the box at the top gives some suggestions of what to look for. It would help me personally if there was a reminder at the top which asked if the content looked </s> |
<s> Be the first of your friends.
Note that for 'Like' an image with Like written on it, is shown.
I just want to put the number of people figure for number of likes, to be shown in my </s> |
<s> *Less frequently, the order in which things are added to a form or panel (or menu!) matters, and it can be easier to change this order in the code than in the Designer </s> <s> That being said, there is at least one exception I can think of and that is the one mentioned by author of the post: extension of Dispose() method. To my knowledge this code - once generated - will not be </s> |
<s> $$
My question is: why do I get the correct answer only if I arrange the sequence a certain way?
A: Your reference page here starts with this introduction (emphasis mine):
Listed here are a couple of basic limits and the standard limit laws which, when used in conjunction, can find most limits. They are listed for standard, two-sided limits, but they work for all forms of limits. However, note that if a limit is infinite, then the limit does not exist.
So everywhere below that warning, if there is a statement that a limit must exist, then it's implicit that the limit must not be $\ </s> |
<s> *
*When I create
*
*or when I run the mobile application
As always any advice or help would be so appreciated. Thank you.
A: You can have below options.
1) There are some </s> |
<s> frame(year = c("2005", "2005", "2005", "2005", "2006", "2006", "2006", "2007", "2007", "2007", "2007"),
quarter = c("1","2","3","4","1","2","3","1","2","3","4"),
rate = c(0.05,0.06,0.07,0.08,0.03,0.01,0.02,0.09,0.08,0.07,0.06), </s> <s> frame(year = c("2005", "2005", "2005", "2005", "2006", "2006", "2006", "2007", "2007", "2007", "2007"),
quarter = c("1","2","3","4","1","2","3","1","2","3","4"),
rate = c(0.05,0.06,0.07,0.08,0.03,0.01,0.02,0.09,0.08,0.07,0.06), </s> <s> # 1 2005 1 0.05 NA
# 2 2005 2 0.06 NA
# 3 2005 3 0.07 NA
# 4 2005 4 0.08 NA
# 5 2006 1 0.03 0.05
# 6 2006 2 0.01 0.06
# 7 2006 3 0.02 0.07
# 8 2006 4 </s> <s> 08
# 9 2007 1 0.09 0.03
#10 2007 2 0.08 0.01
#11 2007 3 0.07 0.02
#12 2007 4 0.06 NA
Note that this will have more rows than your original data if you have missing </s> <s> 1 2005 1 0.05 NA
2 2005 2 0.06 NA
3 2005 3 0.07 NA
4 2005 4 0.08 NA
5 2006 1 0.03 0.05
6 2006 2 0.01 0.06
7 2006 3 0.02 0.07
8 2006 4 NA 0.08
9 2007 1 0.09 0.03
10 2007 2 0.08 0.01
11 2007 3 0.07 0.02
12 2007 4 0.06 NA
Data used:
> </s> <s> structure(list(year = c("2005", "2005", "2005", "2005", "2006",
"2006", "2006", "2007", "2007", "2007", "2007"), quarter = c("1",
"2", "3", "4", "1", "2", "3", "1", "2", "3", "4"), rate = c(0.05,
0.06, 0.07, 0.08, 0.03, 0.01, 0.02, 0.09, 0.08, 0.07, 0.06)), class = "data.frame", row.names = c(NA,
-11L))
> </s> |
<s> Is it valid to write my equation this way? I also want the whole first row h[1,] to be zeros, and it only wants to make h[1,1] a 0. Not sure if I'm missing something obvious. Thanks in advance for the help! (It's my first post here). </s> |
<s> On selection of a table view row, I want to show a check mark on the right hand side of the cell, but the code is not working. Can someone help me to diagnose this?
The same code is working well if I use only a normal </s> |
<s> style.background = '';
//alert(i);
});
})(i)
});
This might not be the main reason for the non functional code..
A: Do you want to change the color of the complete row or the current cell? Your current </s> |
<s> But the moment i try to access it from the object, it throws that error. So the link is correct and it works. It's just whenever i try to access it from within the page..
A: I recommend you to </s> |
<s> Q: C# throw exception to caller I have a function that needs to throw an exception, but I wanted it to throw that exception to the line where I called that function:
static </s> |
<s> ... x y z0
... 22.99 73.089 0.529
... 21.78 40.149 0.512
... 14.45 42.215 0.540
... 12.12 42.144 0.503
... 32.55 51.423 0.521
... 52.21 45.412 0.509
... ''')
>>> </s> <s> x y z0
0 22.99 73.089 0.529
1 21.78 40.149 0.512
2 14.45 42.215 0.540
3 12.12 42.144 0.503
4 32.55 51.423 0.521
5 52.21 45.412 0.509
>>> </s> |
<s> A: You can't mix the %j with others format code like %m because if you look in the table that you linked %j is the Day of the year as a </s> |
<s> void run() {
// do stuff with line
}
}.run();
}
}
A: I have an idea on what you are trying to achieve but not sure how you will code it.
If you can make each thread work on a different set of lines then the threads will not </s> |
<s> However, i have closed all streams at the end of my function. Why is this happening then?
Thanks in advance
A: I don't have enough privileges to post comments so my </s> |
<s> <input type="hidden" name="action" value="add">
<input type="submit" value="Add">
</form>
<form action="" method="post">
<label for="id">By ID:</label>
<select name="id" id="id">
<option value="">Select ID</option>
<? </s> |
<s> When you have changed files its possible to change the branch ich the file is not modified on the branch you are changing to. But you have to be patient then you have the state from the develop branch for example. When the file has changes then you get an error.
A: When you </s> <s> So if you're in a file and notice a fix that should be done on another branch, you switch to that branch, add just the one fix, commit that, and switch back. Your </s> |
<s> Could somebody help me to figure this out?
Also, if anyone know how to bold particular rows/cells please share an example :)
A: The code for the function is here.
All you'd need to do is pass the row number and last column. It starts from column A by default. You cannot use in the </s> |
<s> As data scientists ourselves, we were able to use data to answer each of these burning questions and more. By interpreting thousands of data points from the U.S. Bureau of Labor Statistics ( </s> <s> In fact, interest in the field of data science has increased by a staggering 610% in the past decade. Specifically, a majority of people were wondering about relatively simple things, like "What is data science?" and "What is data?"
But not all types of interest were distributed equally. People from Massachusetts searched data science-related </s> <s> 4%). Furthermore, 15% of them already consider it fully impossible to master data science. That said, they did feel learning certain skills would give them some chance at succeeding: Learning Python was </s> |
<s> The frame is build up from layers of flexible bamboo. The layers are pressed together. The shape is formed by the bamboo's natural bending curve. The layers of bamboo curve through each other and </s> |
<s> After a couple days studying them, I decided to create an Elvis poster using the basic technique of those posters to create my own.
It took nearly two months to complete the Love Me Tender poster and what fun I had creating it. When I finished I thought perhaps I would do just one more, maybe </s> <s> The first poster using this technique was G.I. Blues and like before, one lead to another. Below are my versions of movie posters from some of Elvis's films.
All of the posters are available as a Fine Art Prints. If you are interested in the Original Poster </s> |
End of preview. Expand
in Dataset Viewer.
Dataset Card for "vocab_filtered_dataset_22B"
Dataset Summary
This data is the simplified vocabulary-filtered pretraining data published by "Emergent Abilities in Reduced-Scale Generative Language Models". The vocabulary is derived from the AO-Childes speech corpus (https://github.com/UIUCLearningLanguageLab/AOCHILDES) We filter the train split of SlimPajama dataset (https://huggingface.co/datasets/cerebras/SlimPajama-627B) based on the AO-Childes vocabulary retaining spans which contain integers, symbols, and words that belong to the AO-Childes vocabulary. Around 1.5% of Out of Vocabulary words are also allowed. A contiguous span of 32 tokens are selected. A span is delimited by start of span <s> and end of span </s> symbols.
Citation Information
If this dataset is useful to you please cite our work.
@misc{muckatira2024emergent,
title={Emergent Abilities in Reduced-Scale Generative Language Models},
author={Sherin Muckatira and Vijeta Deshpande and Vladislav Lialin and Anna Rumshisky},
year={2024},
eprint={2404.02204},
archivePrefix={arXiv},
primaryClass={cs.CL}
}
- Downloads last month
- 390