text
stringlengths 307
3.4k
|
|---|
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
NVGEN-3-INVALIDINPUT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The input is invalid. The calling function and the command are displayed'), (Recommended Action: *SH_TECH*) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
INGRESSQ-7-ERR_CLIENT_REG
### Response:
(Severity: 7), (Category: FABRIC), (Description: Ingressq client failed to Register/Unregister with Ingressq Server process. This error is also detected from the client's side. Retrial attempts would be made by the client.), (Recommended Action: 1. Verify the connectivity between the client and the Ingressq process. 'show controllers ingressq clients location <>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
FIA-1-SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_15_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_DISP_ERROR_LANE_INDICATE_15 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
SYS-3-MMAPSHIFT
### Response:
(Severity: 3), (Category: MGBL), (Description: The packet subsystem was not able to initialize memory.), (Recommended Action: The router will not start properly with this condition.\n' 'Call your technical support representative for assistance.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
UCP_LCTRL-7-ERR_INIT_SERVER
### Response:
(Severity: 7), (Category: ROUTING), (Description: The ucp lctrl server could not be initialized.), (Recommended Action: No action is required.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
IMUX-1-RX_MTA_FRM_LEN_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Ingress MUX encountered Rx serdes lane metaframe length error.), (Recommended Action: This fault would result in traffic loss. Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
BPE-7-ERR_LWM_REPLY
### Response:
(Severity: 7), (Category: PLATFORM), (Description: bpe LWM reply error), (Recommended Action: Please attempt to correct the error by restarting the process by issuing the command in exec mode -process restart bpe If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
What is the function of the 'install rollback' command in Cisco IOS XR?
### Response:
The 'install rollback' command in Cisco IOS XR is used to revert the router's software to a previous committed state, useful for undoing changes that may have caused issues. |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
What are the different types of OSPF LSAs and their functions?
### Response:
The main types of OSPF LSAs are\n- Type 1 Router LSA (lists all router's links/states in an area)\n- Type 2 Network LSA (generated by DR, lists all routers on a segment)\n- Type 3/4 Summary LSA (generated by ABR, advertises inter-area destinations and ASBRs)\n- Type 5 AS-External LSA (generated by ASBR, advertises external routes)\n- Type 7 NSSA External LSA (generated by ASBR in NSSA, converted to type 5 by ABR)\"\n |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
INTCTRL-3-ERR_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Interrupt controller Driver encountered a fatal error and is not able to recover.), (Recommended Action: Please attempt to correct the error by restarting the process. Issue the command in exec mode -process restart longbeach If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
BCDLPROD-3-MSG_SEND_FAIL
### Response:
(Severity: 3), (Category: OS), (Description: A call to function for sending BCDL msg to consumers failed. This could lead to inconsistency between BCDL producers and consumers.), (Recommended Action: Contact support.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
FSDB-1-ERR_PLANE_CONFIG
### Response:
(Severity: 1), (Category: FABRIC), (Description: The fabric plane configuration for this multi-chassis system cannot be implemented with the hardware that has been discovered. This error may cause one or more fabric planes to stay down which will affect the bringup of the rest of the system. Possible causes could be incorrect admin plane configuration (ie the configuration states that slot 1 is the first card in a plane whereas slot 0 really is) or an incorrectly sized fiber module is inserted in a slot.), (Recommended Action: Check the admin plane configuration to ensure that it corresponds with the actual physical topology of the system. If this configuration looks correct then contact support, otherwise correct the configuration and the system should recover. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
What is the purpose of the 'allocate global' sub-command under 'mpls label range'?
### Response:
The 'allocate global' sub-command is used to allocate labels from the global label pool. By default, IOS XR uses per-interface label space. The 'allocate global' command switches the label allocation to use the global label space, which is required for some MPLS applications such as L3VPN and MPLS TE. |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
FGID_SVR-4-WARNING_INTERNAL_SW
### Response:
(Severity: 4), (Category: FABRIC), (Description: The FGID Server encountered the annunciated SW error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
LICMGR-4-AUDIT_PROBLEM
### Response:
(Severity: 4), (Category: LICENSE), (Description: The license manager encountered a problem during an internal audit. Check the error string to determine what has happened.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
PIM-3-ERR_MEM_ALLOC
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error in allocating memory.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
NP-0-ALL_NPS_FAILED
### Response:
(Severity: 0), (Category: PLATFORM), (Description: 'All active NPs on the line card have non-recoverable failures. The line card is no longer operational and will be reloaded.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
CFM-5-SATELLITE_PORT_MESSAGE_RECEIVED
### Response:
(Severity: 5), (Category: L2), (Description: A notification message has been received from a Satellite regarding the operational status of CFM on Satellite fabric links.), (Recommended Action: Depending on the content of the notification message, it may be necessary to adjust the CFM Satellite fabric link configuration.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
FIB_IPV6-3-WARNING
### Response:
(Severity: 3), (Category: L2), (Description: A runtime error occurred in ASR9K IPv6 FIB module. The reason for the failure is also displayed. Please call Cisco Support with the error information.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace [common|ipv6] all loc <>). Also notice if the error message is transient or persistent. If the errors persist, report to your technical support representative.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
PLATFORM_LPTS_PIFIB-7-ERR_CONN_INIT
### Response:
(Severity: 7), (Category: OS), (Description: An internal error was detected when trying to connect to the respective component.), (Recommended Action: When this issue happens, it will trigger an automatic restart. Check the status of the respective component because this issue is likely related to it. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
MPLS_MCAST-2-ERR_DLL_INIT
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A failure occurred during the initialization of the mpls mcast platform ingress netio DLL.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
CONFIG-3-UNLOCK_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: An error was encountered during deletion of the configuration lock. This configuration operation (e.g. save/restore configuration, CLI commit) is successful, but subsequent configuration operations could be affected by this error if not corrected.), (Recommended Action: Use 'show configuration lock' CLI to view the pending lock and 'clear configuration lock <lock>' CLI to force deletion of it.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
CLKCTRL-3-RX_ALARM_FRAME_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: For UTI mode alarm is raised if frame error rate exceeds 2%.), (Recommended Action: 1) Ensure valid BITS/UTI signal is applied at input port.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_8_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_8 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
SNMP-3-TARGETNONE
### Response:
(Severity: 3), (Category: SNMP), (Description: A configuration command refers to an SNMP target that has not yet been configured.), (Recommended Action: You must configure an SNMP target before you can refer to it. Examine your configuration. Ensure that the given target has been configured. If it has not, configure it. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>config<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>config<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
IFMGR-3-MISSING_RULES
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: IM is unable to create an interface/caps due to static information about the resource type being missing. The system may be in an inconsistent state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
OSPFv3-3-PKTDROP_STR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An input packet was dropped for the specified reason.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
SHMWIN-6-FILE_EXISTS
### Response:
(Severity: 6), (Category: OS), (Description: SHMWIN encountered an error condition, the file was existing already.), (Recommended Action: No action is required.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
NVGEN-3-LOCK_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: A lock operation on shared resource, called by nvgen failed due to the mentioned error.), (Recommended Action: Collect the output of show logging and inform Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
DUMPER-4-FLT_STACK
### Response:
(Severity: 4), (Category: OS), (Description: Signal info.), (Recommended Action: No action required.Ignore.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
RVM_MGR-3-ERROR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Error message), (Recommended Action: none.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
SCONBKUP-6-INTERNAL_INFO
### Response:
(Severity: 6), (Category: MGBL), (Description: This is a informational message indicating that cfgmgr debug logs have been collected during reload.), (Recommended Action: This is a info message. No action to be taken) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
ETHERNET_LOOPBACK-3-TRACE_INIT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize trace in the platform Ethernet loopback component), (Recommended Action: No action is required.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
BRIDGE-3-NPU_1_PKT_MAXLEN_ERR_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error on NPU-1 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
XCVR-3-DEBUG_INIT_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an informational message from the XCVR stating that failed to initialize a debug event type structure provided by the application with the supplied data), (Recommended Action: *RECUR*) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
INSTMGR_LIB-6-TEST_ISSU_RUN_RELOAD_SLEEP
### Response:
(Severity: 6), (Category: INSTALL), (Description: Informs the user how many seconds the node is sleeping before reloading during a 'test ISSU-run' operation.), (Recommended Action: No action is required.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
HFR_TUNNEL_EA-3-INIT_ERR1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the CRS platform specific code software to indicate errors that happened during initialisation. This error is most likely caused by a temporary situation, so is unlikely to occur. %s - indicates the reason for the failure. %s - is the decoded error reason.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
What is the function of the XML Management Interface in Cisco IOS XR?
### Response:
The XML Management Interface in Cisco IOS XR allows for the configuration and monitoring of devices using XML over secure HTTP (HTTPS), providing a standardized and programmable interface. |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
CFM-6-MEP_CHANGE
### Response:
(Severity: 6), (Category: L2), (Description: A CCM message was received from a new peer MEP, or a previously-known peer MEP timed out (i.e. its configured loss threshold was exceeded). This message appears because the service which the local MEP belongs to has continuity-check state change logging configured.), (Recommended Action: None.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
MEDIAAPI-4-INVALID_PARM_FORMAT_PART
### Response:
(Severity: 4), (Category: MEDIA), (Description: An invalid parameter value was passed to the driver to format and partition the media device.), (Recommended Action: Check the syntax for the the format command Report this message to TAC if the syntax and device are valid.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
How to configure inter-VRF route leaking in MPLS L3VPN?
### Response:
To configure inter-VRF route leaking in MPLS L3VPN, use import and export route-target commands between VRFs. vrf MyVRF
import route-target 65000:200
vrf MyVRF2
export route-target 65000:200 |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
IMFPGA-3-SI5347_PLL_LOL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: SI5347 PLL loss of lock detected/cleared for RSP), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
RIP-3-ERR_THREAD_MUTEX_LOCK
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error during locking of a RIP resource.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
RSPP_MA-4-DUP_REMOVE
### Response:
(Severity: 4), (Category: SERVICES), (Description: The given attachment configuration, which was previously invalid due to duplicate attachments being configured on different interfaces, is now valid as the duplicate attachment configuration has been removed.), (Recommended Action: No action is required.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
BRIDGE-2-XAUI_1_HQ_PKT_LEN_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Queue packet length error on XAUI 1 HQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
SYNCFS2LIB-7-MUTEX_UNLOCK
### Response:
(Severity: 7), (Category: MEDIA), (Description: A required mutex unlock failed.), (Recommended Action: Contact customer support) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
L2SNOOP-3-INIT_ERR
### Response:
(Severity: 3), (Category: IP), (Description: An software error occurred while starting up of L2SNOOP process. If this occurred during process startup, then the process may be restarted.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and no other adverse effects are observed then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
BRIDGE-2-DEC_A_PKT_LEN_ERR_1
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Packet with invalid length encountered by decoder A on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
ETH_LB-3-INTERNAL_PROBLEM
### Response:
(Severity: 3), (Category: L2), (Description: An internal error has occurred, causing the feature to not be able to function properly.), (Recommended Action: The process is automatically restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
LPTS_PREIFIB-3-REASS_LIST
### Response:
(Severity: 3), (Category: OS), (Description: The list of reassembly servers is incorrect.), (Recommended Action: Please try restarting pifibm_server_lc and pifibm_server_rp processes.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
OTN_FRAMER-3-PCI_DEV_RECOVERY_CB
### Response:
(Severity: 3), (Category: OS), (Description: pci devices recovery cb messages), (Recommended Action: Informational only.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
NVRAW_LIB-4-REBOOT_HIST
### Response:
(Severity: 4), (Category: MEDIA), (Description: Information to collect the logs), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
CPAK-3-LANE_2_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature less than or equal to the low temperature warning threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CPAK with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
CDP-4-DUPLEX_MISMATCH
### Response:
(Severity: 4), (Category: L2), (Description: CDP discovered mismatching duplex configuration on neighboring interfaces.), (Recommended Action: Configure the interfaces with the same duplex (full or half).) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
RTC-2-CAL_CHIP_NOT_FOUND
### Response:
(Severity: 2), (Category: MGBL), (Description: Unable to find calendar chip.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
SPM-3-ERROR_PTHREAD_INIT
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.') |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
NPUXBAR_BRIDGE-1-EBS_OC_HDR_CRC_ERR
### Response:
(Severity: 1), (Category: PLATFORM), (Description: EBS from FIA header checksum error.), (Recommended Action: None.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
FHRP_OUTPUT-3-WARN_COMMS_INIT
### Response:
(Severity: 3), (Category: IP), (Description: The FHRP output process communications failed to initialize correctly. In this situation the FHRP output process retries the initialization, but may not recover if the failure to initialize persists. Clients of the FHRP output process (such as HSRP and VRRP) will not be able to send packets until the initialization succeeds.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
RSP_CPUCTRL-3-ARB_ECTW_RDATA_TO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
LOGIN_SHELL-6-SIGNAL_HANDLER_INFO
### Response:
(Severity: 6), (Category: MGMT), (Description: This comes when registration of signal fails due to some system issue), (Recommended Action: The work-around is restart process would resolve the issue) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
I2CCTRL-2-MASTERSHIP_DENIED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: SMBus Mastership Denied by Bus-Master Mux), (Recommended Action: Please attempt to correct the error by reloading the card by issuing the command in admin mode -reload location <> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
What is the purpose of the MPLS TE FRR backup tunnel timers feature?
### Response:
The MPLS TE FRR backup tunnel timers feature allows the configuration of hold and delay timers for backup tunnels. The hold timer specifies how long a backup tunnel should remain in place after the protected interface comes back up. The delay timer specifies how long to wait before installing the backup tunnel after the protected interface goes down. These timers help avoid unnecessary backup tunnel churn. |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
SVII_ADJ_LIB-3-INIT_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The SVI Adjacency Manager Library's initialization has failed. The process will exit and automatically restart.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
PERF_MEAS-3-CFG_PORT_FAILED_TO_OPEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: After several retries, the configured port has failed to open. The first argument is the name of the configured port and the second argument is the port number.), (Recommended Action: Configure a different port number. show udp brief will show which ports are already being used.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
PSE-4-IMDR_RESET_FAILED
### Response:
(Severity: 4), (Category: L2), (Description: This is an error message in the PSE Driver to indicate that it failed to perform iMDR reset of specified pse instance due to the specified reason.), (Recommended Action: No action is required.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
What is the purpose of OSPF areas and how do they help with scalability?
### Response:
OSPF allows a network to be divided into areas. An area is a logical collection of OSPF networks, routers, and links that have the same area identification. Areas limit the scope of link-state advertisements (LSAs) and thus reduce the size of the topology databases on each router. This improves scalability in large networks. Areas must be connected to the backbone area (Area 0) via an Area Border Router (ABR). |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
SHELFMGRV2-4-CARD_POST_NOT_TRIGGER
### Response:
(Severity: 4), (Category: PLATFORM), (Description: The card is reloaded due to a faulty HW/ASIC. The Online Diags process can't perform the required diagnostic testing on the falling device, hence the card will then be reloaded with XR image.), (Recommended Action: No action is required.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
EIGRP-6-PAK_SEND
### Response:
(Severity: 6), (Category: ROUTING), (Description: Failed to send a packet. This can happen if other processes involved in packet forwarding are restarting. This may or may not be transient. If the packet which was not sent is HELLO then the EIGRP adjacency may flap if this issue happens long enough for the peer to detect a hold time expiry. If the packet which was not sent is a non-HELLO then the EIGRP adjacency may flap if this issue is seen long enough to exhaust the maximum number of retransmissions.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
PROCMGR-3-SYSDB_EDM_REG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Procmgr failed to register with Sysdb EDM. This may be a program level error.), (Recommended Action: Provide the required information to support If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
CARD-3-CPI_NOT_READY
### Response:
(Severity: 3), (Category: PLATFORM), (Description: ClkCtrl driver detected a card cpi not ready condition), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
CROSSBAR-1-HI_FPOE_DB_CORR_ECC_ERROR_LNK2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast FPOE correctable ECC error on link 2), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
VKG_IPV6_EA-3-FAILURE1
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is a failure message in the ASR9K platform specific code software to indicate anomolies that are not serious failure. This failure is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect console log, traces * SH_CMD show af-ea ipv6 trace errors loc <slot number> * Also notice if the failure message is transient or persistent. Report to your technical support representative.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_5_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
ARP_GMP-4-WARN_INIT
### Response:
(Severity: 4), (Category: IP), (Description: The ARP GMP process failed to initialize correctly. In this situation it restarts, but it may not recover if there is a persistant error in the IOSXR system and the ARP GMP is later unable to reestablish its connections and initialize successfully.), (Recommended Action: Try restarting the ARP GMP process. If the issue is seen repeatedly Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
MEMPOOL_EDM-1-SYSDB_REGISTRATION_FAILURE
### Response:
(Severity: 1), (Category: OS), (Description: Sysdb registration failure), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.') |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
OIRD-7-MMAP_FAIL
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to mmap OIR registers.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
LPTS_PREIFIB-3-DATAPATH_CMD
### Response:
(Severity: 3), (Category: OS), (Description: The given Pre-IFIB datapath control command returns error.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
ENVMON-4-CBC_WDOG_EXCEED_THRESHOLD
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Watchdog stats are collected on active RP.If watchdog toggle is not seen for long time, the message will be displayed.), (Recommended Action: Collect the output from RSP : admin show canbus server-stats location all) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
SYSDB-7-STARTUP
### Response:
(Severity: 7), (Category: SYSDB), (Description: A startup request failed during the second round of callbacks.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
KIM-3-DEFAULT_ROUTE_CREATION_FAIL
### Response:
(Severity: 3), (Category: INFRA), (Description: A failure occurred when attempting to create a default route in the TPA system for the specified vrf. Forwarding for TPA applications (including telemetry) will likely be impacted.), (Recommended Action: Restarting the kim process or unconfiguring and reconfiguring the VRF may be sufficient to recover. A switchover or router reload may be required if this condition persists. This error condition may sometimes be worked around by configuring the VRF to use the 'mgmt' default route. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
OT-6-LIB_AVAIL
### Response:
None |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
LIB_VMAN-3-INCONSISTENT_CPUTUNES_CONFIG
### Response:
(Severity: 3), (Category: OS), (Description: The virtual service machine definition file is requesting invalid CPU tunes parameter.), (Recommended Action: Use a different valid machine definition file for the virtual service. If the problem persists, then enable the Virt-manager trace logs and repeat the activation of the virtual service. Collect the Virt-manager logs and scan them for the cause.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
What is the purpose of the install activate auto-abort-timer command in IOS XR?
### Response:
The 'install activate auto-abort-timer' command is used to set a timer for the automatic rollback of an installation if the user doesn't commit the changes within the specified time. This provides a safety mechanism to revert to the previous software set if something goes wrong during the installation. |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
QSFP_PLUS-2-LANE_1_LOW_RX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power less than or equal to the low Rx power alarm threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
NPUXBAR_BRIDGE-1-EBS_CPP_HP_FIFO_MBE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: EBS to CPP high priority FIFO multiple bits error.), (Recommended Action: None.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
OFA_PLUGIN-3-BD_INVALID_LS_LAYER
### Response:
(Severity: 3), (Category: L2), (Description: Unable to assign bridge domain because logical switch is not layer2 type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
PKG-3-CORRUPT_INSTALL_FILE
### Response:
(Severity: 3), (Category: INSTALL), (Description: An install file is corrupt. This may affect the system in a number of ways including preventing nodes from booting and preventing install operations.), (Recommended Action: First attempt to repair the file using 'install verify repair', this is this least impactful operation. If that is unable to repair the file then if possible 'install remove' the package associated with the file and then 'install add' the pie containing the package. If the file is still corrupt then use a pre-prepared backup disk if available to revert to a previously known good set of software, or failover to standby nodes to start using their set of software files.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
SYSDB-4-SC_FIND
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
SIM_IPC-3-SYSDB_LIST_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The message indicates the failure while updating the data items in the system database.), (Recommended Action: Please collect the console log and CLI output. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. show cef show cef location <> show cef trace location <>) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
ISLM-4-SESSION_THRESHOLD_EXCEEDED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when the configured session threshold has been exceeded.), (Recommended Action: This is warning to alert the user that sessions may be near the limit that is configured or entitled.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
FPD_CLIENT-3-INIT_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A failure has occured in the FPD Client during process initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
T1E1_LNM-3-REMWARNNOISE
### Response:
(Severity: 3), (Category: L2), (Description: Noise on the link has either crossed or fallen below the threshold value configured by the user for link removal on the controller identified in the message. Video or voice quality may be affected if noise is above the configured threshold.), (Recommended Action: This link requires administrative attention. If noise is at or above the configured threshold, only applications such as MLPPP bundles support automatic removal of links from bundles. For other applications, the administrator may need to remove/replace this controller from service. If noise is below the configured threshold and was previously taken out of service by the administrator, the administrator may choose to put this link back into service or wait until noise has fallen below minor-warning level threshold. For an MLPPP link, this will be done automatically.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
SHELFMGRV2-3-SLOT_SPECIFIC_FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This message indicates that an operation to get Card Control Block CCB for specific to a slot has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
TZ-3-INTERNAL
### Response:
(Severity: 3), (Category: OS), (Description: Serious problem occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
ISIS-4-EVENT_CONN_ERROR_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: After detecting an error with the connection to the specified service, IS-IS failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
BFM-4-INIT_ERROR
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: bfm encountered a error and is not able to recover from the error trying again. A reason text will be supplied call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
LOCALD-3-BAG_ENCODE_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: Failed to encode a bag.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
IKEv2-6-KEYRING_NOT_FOUND
### Response:
(Severity: 6), (Category: SECURITY), (Description: Keyring not found in IKEv2 profile.), (Recommended Action: Configure and attach keyring to IKEv2 profile.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
PHYS_COMMON-6-AINS_STARTED
### Response:
(Severity: 6), (Category: L1), (Description: The notification Indicating Successful (Re)Start of Automatic In-Service Soak Timer), (Recommended Action: None.) |
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request.
### Instruction:
You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog
### Input:
CANB_SERVER-6-RP_ISOLATION_RESET_REQ
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is an informational message indicating that RP Isolation is in force, CPU reset request for the target slot is ignored.), (Recommended Action: No action is required.) |