Datasets:

ramixpe

/

sp_dataset_llama

like 0

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CONCERTO-5-ERR_CONT ### Response: (Severity: 5), (Category: PLATFORM), (Description: This message indicates an error occurred beyond which execution of the concerto_driver may continue, attempting to effect recovery or work-around internally, minimizing loss of information/functionality.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INST_IO-3-NULL_POINTER ### Response: (Severity: 3), (Category: INSTALL), (Description: 'One of the function arguments is NULL.'), (Recommended Action: 'Retry the 'show' command or 'install' operation.' 'Even after few tries,if the error is seen, ' 'restart the 'instdir' process from exec mode and retry the operation.' 'Contact TAC if not resolved.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FHRP_COMMS-4-DUPLICATE_ENTRY ### Response: (Severity: 4), (Category: L2), (Description: The Checkpoint table contained a duplicate entry. This is unexpected, and likely indicates a software fault.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SYSDB-4-SC_EVENT ### Response: (Severity: 4), (Category: SYSDB), (Description: A notification event other than one of those supported was supplied.), (Recommended Action: Use help for a list of supported events. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_15_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_15 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LOGIN_SHELL-3-BASH_SPAWN ### Response: (Severity: 3), (Category: MGMT), (Description: This error comes when there is issue with spawning the bash, bash shell itself is not present), (Recommended Action: The issue should be recovered when retrying login, if this message keeps on coming please collect required log)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PIM-3-ERR_MRIB_UNBIND ### Response: (Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FR_INARP-2-INIT ### Response: (Severity: 2), (Category: L2), (Description: During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager. The argument will show the error detected.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIB-3-IDB ### Response: (Severity: 3), (Category: ROUTING), (Description: FIB maintains a database for interfaces, but was unable to process an entry. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: Try restarting the FIB process to see if the problem goes away. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the purpose of the 'bgp multipath as-path' command in IOS XR BGP configuration? ### Response: The 'bgp multipath as-path' command is used to enable multipath load balancing over paths with different AS paths. It is similar to the 'bgp bestpath as-path multipath-relax' command, but it allows the installation of multiple paths in the forwarding table even if they have different AS paths. This command is useful in scenarios where there are multiple valid paths to a destination and load balancing over all of them is desired.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CIH-1-ASIC_ERROR_SPECIAL_HANDLE ### Response: (Severity: 1), (Category: PLATFORM), (Description: An ASIC error that need special handling has occured and been handled.), (Recommended Action: The error condition has been handled.Collect required information and contact TAC *None*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SONETMIBCORE-7-STATUS ### Response: (Severity: 7), (Category: SNMP), (Description: A Debug message), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CLKCTRL-5-PLL_T0_STATE_HOLDOVER ### Response: (Severity: 5), (Category: PLATFORM), (Description: No external reference frequency is available for synchronization, so the T0 PLL output is in holdover, maintaining the most-recent frequency to which it was locked.), (Recommended Action: None. This is just a status indication.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-2-LANE_9_LOW_TX_POWER_ALARM ### Response: (Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-2-PAR_SERR_1 ### Response: (Severity: 2), (Category: PLATFORM), (Description: Single bit mem parity error on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CEM-3-INIT ### Response: (Severity: 3), (Category: L2), (Description: Failure occured during the initialization of CEM component Logs the reason for failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect the component logs, based on the message found.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_FIB-3-SYSDB_INIT_FAIL ### Response: (Severity: 3), (Category: PLATFORM), (Description: The error occurs if the binding or iteration of the data list in the system database fails.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>), show cef platform services resource oor common loc <ISM> show cef platform services resource shm-objects common loc <ISM> show cef platform services trace common all reverse loc <ISM> show cef platform services trace common errors reverse <loc> Also notice if the error message is transient or persistent. Report to your technical support representative.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV4_MFWD-4-ERR_RETRY_TRANS_INIT ### Response: (Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHELFMGR-3-PARTIAL_INSERTED_CARD ### Response: (Severity: 3), (Category: PLATFORM), (Description: This message indicates that the Shelf Manager, If receive 100 consecutive HB's from a card, and our OIRd info still says this card NOT_PRESENT, then the card is probably only partially inserted. Send out an ios_msg informing the user of the situation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QSFP_PLUS-3-LANE_3_LOW_BIAS_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias less than or equal to the low laser bias warning threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIB_IPV6-3-ERR_INFO ### Response: (Severity: 3), (Category: L2), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace common all location <> show cef platform trace ipv6 all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: EPM_SWITCH-3-GN2412_FAULT_NORELOAD ### Response: (Severity: 3), (Category: PLATFORM), (Description: GN2412 device, which is used for communication to lower chassis LCs, is down), (Recommended Action: The board is not reloaded. At this stage collect the output of (admin)'show tech support control ethernet location <nodeId>')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the purpose of the MPLS TE tunnel mode feature? ### Response: The MPLS TE tunnel mode feature allows an MPLS TE tunnel to operate in either global or interface mode. In global mode, the tunnel is associated with the global routing table. In interface mode, the tunnel is associated with a particular interface and is only used to forward traffic arriving on that interface. Interface mode allows better control over tunnel utilization.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BGP-3-REDIST_FAIL ### Response: (Severity: 3), (Category: ROUTING), (Description: A RIB client library call for redistribution of routes failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LC_QFPCPUCTRL-1-FATAL_ERR_INTR ### Response: (Severity: 1), (Category: PLATFORM), (Description: CPU controller FPGA detected repeated parity errors on the A/D CPU bus or one of the SPAQFPBridgeCtrl ERP buses.), (Recommended Action: Reboot the board. If the problem persists, replace the board.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSDB-3-ERR_UNKNOWN_FAB_DEF ### Response: (Severity: 3), (Category: FABRIC), (Description: A file describing switch fabric components is not present on the router.), (Recommended Action: If the hardware installed in the router has changed, ensure that fabric control software has been upgraded to the correct version. If the correct software has been installed, report the problem to technical support.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CONTROL_DRIVER-6-OBFL_ERASE ### Response: (Severity: 6), (Category: DRIVER), (Description: This message indicates the progress of OBFL flash erase procedure. This functionality is to be used with caution, and it is supposed to be used by Cisco Support team only.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PPPOE_MA-6-INFO_OUTR_VLAN_SES_LMT_NO_REACHD ### Response: (Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions for a particular Outer VLAN on the given access interface is no longer exceeding the configured maximum.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NPUXBAR_BRIDGE-0-RSPI_ALIGN_OVFL ### Response: (Severity: 0), (Category: PLATFORM), (Description: RxSPI align 16B memory overflow.), (Recommended Action: Reset the board.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BM_PD-3-DLL_INIT ### Response: (Severity: 3), (Category: L2), (Description: A failure occurred during the initialization of the platform dependent adjacency programming DLL. This will result in the hosting process being restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CCI_HAL_SATORI-7-SPP_UNICAST_INFO ### Response: (Severity: 7), (Category: PLATFORM), (Description: Dumping packet data. %x- debug info.), (Recommended Action: debug info.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_PW_INTR_SRC_PT_MISMATCH_ERR_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_PW_INTR_SRC_PT_MISMATCH_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MBI_HELLO-3-MSG_SEND_FAIL ### Response: (Severity: 3), (Category: PLATFORM), (Description: A communication problem occurred between the MBI client and server. The MBI operation in progress will not be carried out.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MPLS_LSD-4-STDBY_IPC_FLAP_STUCK_FLOW_CTRL ### Response: (Severity: 4), (Category: ROUTING), (Description: The AIPC link between active and standby LSD has been stuck in flow control for an unexpected duration and is blocking data transfer between them. To recover from this state the affected AIPC link has been torn down and re-established.), (Recommended Action: Please collect show tech for mpls_lsd, aipcproxy and gsp for further investigation.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INSTMGR-3-INSTALL_SYSTEM_ERROR_GLOBAL_NODES ### Response: (Severity: 3), (Category: INSTALL), (Description: A system error occurred within the install system, not during an install operation. This may indicate a transitive problem within the system or a problem with the code.), (Recommended Action: Check system consistency using 'install verify'. Run 'install verify packages repair' if anomalies are found. If the problem persists collect diagnostic information about the failure using the specific command and pass it to your TAC representative.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSDB-3-ASERVER_DOWNLOAD ### Response: (Severity: 3), (Category: FABRIC), (Description: Fabric control software failed to synchronize configuration details between the fsdb_server and fsdb_aserver processes. If the affected rack is being added to the system it cannot be brought into service. If the affected rack is already in service, then it cannot respond to fabric failures or changes.), (Recommended Action: No action is necessary. If condition persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FABRIC_DRVR-2-ERR_SHUTDOWN ### Response: (Severity: 2), (Category: FABRIC), (Description: Fabric driver detected hardware errors and requested shelfmgr to shut down the node. But shelfmgr failed to do so. The card and its fabric ASICs should have been isolated from the system before the shutdown attempt.), (Recommended Action: Check the health of the shelfmgr process on the RP in its rack. If shelfmgr is healthy, and the card cannot self reload, then reload the card with the following command in admin mode: 'hw shut loc y/SMx/sp', where x is the SM module number that generated the error, y is the rack that it is in. If manual shutdown does not work, or if the error recurs, call your Cisco technical support representative and provide the gathered information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FABRIC_DRVR-6-ASIC_PON_RESET_POST_SCAN ### Response: (Severity: 6), (Category: FABRIC), (Description: Recover identified ASIC with a power on reset following ASIC scan.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLATFORM_LPTS_PIFIB-3-CONFIG_UNKNOWN_PARAMETER ### Response: (Severity: 3), (Category: OS), (Description: Syntax error in PIFIB flow handling configuration. The named flow type may have default characteristics applied.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DWDM-6-PP_EVENT_INJECT ### Response: (Severity: 6), (Category: L2), (Description: This is for information that g709_api has been used to inject Proactive protection event with above mentioned attributes.), (Recommended Action: None.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: AAAD-7-DEBUG ### Response: (Severity: 7), (Category: MGBL), (Description: General debugging information for development and general diagnosis.), (Recommended Action: *NONE*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ATTACH-3-ETHERNET_DRIVER_FAIL ### Response: (Severity: 3), (Category: PLATFORM), (Description: Unable to open the ethernet device driver. %s- Unable to open ethernet driver, errno. %d- Reason for the failure.), (Recommended Action: *SUPPORT*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: nrs-3-LOCKING ### Response: (Severity: 3), (Category: OS), (Description: The server has either failed to aquire or release a lock.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CARD_MGR-5-OIR_REMOVED ### Response: None

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LTRACE_SYNC-3-FILE_OPEN_FAILED ### Response: (Severity: 3), (Category: OS), (Description: Failed to open file), (Recommended Action: The file could not be opened to write ltrace configuration. This could be due to an invalid filesystem or other file operation error as indicated by the error message. If the error is due to disk space issues, try to free some space on the filesystem. Else Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DUMPER_MARK-4-NO_SLOT ### Response: (Severity: 4), (Category: OS), (Description: A new request for marking segment came, but the marker reference array is already filled. Dropping this request.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PMIPV6-3-TIMESTAMP_LOWER_THAN_PREV_ACCEPTED ### Response: (Severity: 3), (Category: IP), (Description: The timestamp received in the PBU is lower than the timestamp that was received in the previous PBU.), (Recommended Action: Note the NAI of the MN from the error message. Clear the binding using the following command. Check if the error goes away after receiving a new PBU after the binding is cleared. <CmdBold> clear ipv6 mobile pmipv6 lma binding nai <NAI> <NoCmdBold> If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: GROUP_MEMBERSHIP-4-OOR_WARN ### Response: (Severity: 4), (Category: ROUTING), (Description: Maximum number of group accepted, either per interface or globally.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SNMP_IPC-3-CTRLMSGTIMEOUT ### Response: (Severity: 3), (Category: SNMP), (Description: SNMP library incurred an internal software error. This error indicates sysnchronization lock crate failed), (Recommended Action: No recovery required.System auto recovers.pls collect logs Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PM-6-DUMP ### Response: (Severity: 6), (Category: MGBL), (Description: An informational alarm upon dumping of the collected data), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INSTMGR-7-ISM_PD_LIB_CE_CONN_ERR ### Response: (Severity: 7), (Category: INSTALL), (Description: Shows the error messages other than the CE connection errors), (Recommended Action: Debug message only. No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PKG_PLAT-7-INTERNALERR ### Response: (Severity: 7), (Category: INSTALL), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SYSMGR-7-INSTALL_FINISHED ### Response: None

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: spp-4-TIMER_FAILED ### Response: (Severity: 4), (Category: PKT_INFRA), (Description: SPP failed to initialize its periodic 1Hz timer, which is used to ensure that rollover of the system timestamp is handled correctly. It is likely that times reported by the following show commands will be incorrect as a result: - show spp node), (Recommended Action: Restarting the SPP process may help to resynchronize the system state. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSDB-3-ERR_BUNDLE_LINK ### Response: (Severity: 3), (Category: FABRIC), (Description: This is to indicate that the no. of down links in a bundle has changed from zero to non-zero or vice versa.), (Recommended Action: This message is expected if a cable is inserted or removed, or if a fabric card (or chassis) to which the cable connects is powered on or off, or rebooted. If a change to DOWN is seen in other circumstances it may be due to a hardware failure. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CHNLZD_EFCM-3-ERROR_COMM_SPA_CLIENT_INIT ### Response: (Severity: 3), (Category: L2), (Description: An error has occurred in the Extended Flow Control Manager. An attempt to set an entry in the Flow Control calendar failed. This error indicates that messaging between the SPA process and the Jacket process failed.), (Recommended Action: *RECUR*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CTRLIO-3-AIB_REWRITE_FAILED ### Response: (Severity: 3), (Category: PKT_INFRA), (Description: 'CTRLIO AIB Re-write failed.' 'This will not effect the process directly.' 'This operation is optional'), (Recommended Action: 'ISSU manager will use some alternate API' 'If the issue persists ' 'contact tac with 'show tech-support issu'.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: UPGRADE_FPD-3-SYNC_ATTACH ### Response: (Severity: 3), (Category: PLATFORM), (Description: Failed to attach sync message handler. An handler is not being setup for receiving all synchronous message. This involves exiting the upgrade_fpd or lc_upgrade_fpd process.), (Recommended Action: First try to restart the process ( upgrade_fpd or lc_upgrade_fpd) and check if the problem is recovered. If not do a switchover RP or reboot the router either manually or via Command line. If that too fails call Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OSPFv3-4-BADLENGTH ### Response: (Severity: 4), (Category: ROUTING), (Description: The system received an OSPFv3 packet with a length field of less than normal header size or inconsistent with the size of the IPv6 packet in which it arrived. This indicates an error in the sender of the packet.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FCA-2-SFP_LNK_FAULT_ERROR_1 ### Response: (Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FAB_SVR-7-ERR_HEARTBEAT_FSM_STATE ### Response: (Severity: 7), (Category: FABRIC), (Description: Fabric server heartbeat monitoring mechanism detected a problem in the internal state machine.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PEXMGR-1-EXIT_INIT ### Response: (Severity: 1), (Category: PLATFORM), (Description: The message can be displayed whenever there is a driver initialization error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LDP-5-GR_NBR_CHANGE ### Response: (Severity: 5), (Category: ROUTING), (Description: An LDP GR session state change has occured - such as disconnected, reconnected, timed out, and cleaned up. This message appears only if the <Bold>mpls ldp log graceful-restart <NoBold> command is configured.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LTRACE-7-OPEN_ERROR ### Response: (Severity: 7), (Category: OS), (Description: open system call returned an unexpected error Debug trace buffer initialization failed.), (Recommended Action: Contact support.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PQMON-6-QUEUE_LOW_THRESH ### Response: (Severity: 6), (Category: PKT_INFRA), (Description: Informational message to indicate that a queue build-up has cleared up. This message coupled with the corresponding queue build-up message can give an indication of how long the queue build-up condition lasted.), (Recommended Action: None.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ATM_NETIO-3-LOAD_PATH ### Response: (Severity: 3), (Category: L2), (Description: The env variable setting may not be set up for load path variable), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: vlea-4-IM_RESYNC_FAILURE ### Response: (Severity: 4), (Category: L2), (Description: The VLAN EA process encountered an error during resynchonization with the IMP process. This error message either indicates that the VLAN EA process never received an end of replay message from IM, or it received an inconsistent dataset from IM.), (Recommended Action: The system will attempt to recover automatically. If this fails a restart of the IM process on the affected node is recommmended to aid recovery. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CARD_MGR-1-FLASH_READ_FAIL ### Response: (Severity: 1), (Category: DRIVER), (Description: card_mgr has detected on this PID the running BB IOFPGA version on the box is not, compatible with the CPU-IOFPGA. Hence it is recommended to upgrade BB-IOFPGA first before going for CPU-IOFPGA upgrade in order to avoid bricking of te box.), (Recommended Action: In case the operation fails please collect logs 1. Syslogs 2. show tech card-mgr 3. show tech fpd 4. show tech obfl 5. show tech shelf-mgr 6. show tech ctrace 7. show tech fpd-serv)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What are the different types of BGP path attributes? ### Response: The main BGP path attributes are\n- Weight (Cisco proprietary)\n- Local Preference\n- AS Path\n- Origin\n- Multi-Exit Discriminator (MED)\n- Community\"\n

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_CLIENT-2-UPGRADE_LICENSE_EVAL_EXPIRED ### Response: (Severity: 2), (Category: LICENSE), (Description: Your evaluation period has expired. Register the device with Cisco. Software upgrades will be blocked once the upgrade grace period of 90 days expires. Please check show license platform summary/detail for more information.), (Recommended Action: Customer should register the device to Cisco.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CCTL-3-CERR_REG_DLL_FAIL ### Response: (Severity: 3), (Category: PLATFORM), (Description: The particular operation mentioned in the message failed due to cerr_register_dll failure. This is not a critical failure, the process can continue functioning as expected despite the failure.), (Recommended Action: *DEBUG*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VKG_PM-3-ERROR_INIT ### Response: (Severity: 3), (Category: PLATFORM), (Description: Service Platform Manager encountered an initialization error A reason text will be supplied to describe the error.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MPLS_TE-5-S2L_REROUTE ### Response: (Severity: 5), (Category: ROUTING), (Description: The specified sub LSP has been rerouted.), (Recommended Action: None. This is a solicited message (by 'logging event sub-lsp reroute' \ interface destination configuration) and is informative only.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LDP-3-LPTS_UDP_POLICY_FAILED ### Response: (Severity: 3), (Category: ROUTING), (Description: Installation of LPTS UDP Hello filters for targeted LDP neighbors failed. This failure can prevent sessions to LDP targeted neighbors from being established.), (Recommended Action: Verify the number of targeted neighbors, either configured or L2VPN. Check 'show lpts pifib..' for statistics and limits.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: HA_WD-6-MEMORY_RECOVERY_KILL_NON_SYSMGR ### Response: (Severity: 6), (Category: HA), (Description: The process with the indicated name and pid has been killed in an attempt to recover system memory. Since this process is not managed by sysmgr, it may not be restarted. The process can be manually restarted if desired, but may continue to consume large amounts of memory.), (Recommended Action: The system is critically short of memory. Automatic recovery will attempt to stabilize the system, but there is either a memory leak or a misconfiguration. Both require operator intervention.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CCTL-3-MSG_HNDLR_INIT ### Response: (Severity: 3), (Category: PLATFORM), (Description: The Envmon process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process envmon location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FABARBITER-2-FATAL_FAULT ### Response: (Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter ASIC hit fatal fault.), (Recommended Action: Fabric arbiter asic hit fatal fault. Please try reloading the card using command 'hw-module location <> reload' to recover. If the error message persists after a few reloads of the card, please contact tech-support)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: REDCON-4-STANDBY_NOT_READY_ALARM ### Response: (Severity: 4), (Category: HA), (Description: Set: When the standby remains in not ready state for a prolonged period. Cleared: When the standby is removed, reset or goes ready.), (Recommended Action: Collect system log information. No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIB_IPV6-3-PARAM_ERR ### Response: (Severity: 3), (Category: L2), (Description: Errors in params passed to functions in IPV6 FIB platform.), (Recommended Action: Please collect the required logs Also notice if the error message is transient or persistent. If errros persist, report to your technical support representative.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_0_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_8B10B_DECODE_DISPARITY_ERROR_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DOT1X-3-PORT_CONTROL_ADD_CLIENT_FAILURE ### Response: (Severity: 3), (Category: L2), (Description: Failed to add client for port-access.), (Recommended Action: Check the platform logs for error.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FABRIC_DRVR-4-ERR_LTRACE_INIT ### Response: (Severity: 4), (Category: FABRIC), (Description: The Fabric driver could not open/initialize the ltrace buffer. The Fabric driver and the system should stll function as normal, with the exception that ltrace will not be available for sfe_drvr process.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RSVP-3-RSVP_LSP_RESOURCE_EXHAUSTED ### Response: (Severity: 3), (Category: ROUTING), (Description: Resources to setup new LSP's are exhausted.), (Recommended Action: This condition will persist until some LSP's are brought down.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PERF_MEAS-5-PM_DELAY_EXCEEDS_THRESHOLD ### Response: (Severity: 5), (Category: ROUTING), (Description: PM delay metric has exceeded threshold specified in the performance-measurement delay-profile.), (Recommended Action: None. This is a solicited message when performance measurement delay metric on interfaces, SR Policies, RSVP-TE tunnels has exceeded threshold and advertisement logging delay-exceeded config in corresponding profile is enabled. It is informative only.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHELFMGRV2-4-SERVICES_PLIM_MISPLACED ### Response: (Severity: 4), (Category: PLATFORM), (Description: Services PLIMs in the lower slot (s = 8..15) may only be powered on if there is no Non-Services PLIMs powered on in the paired upper slot (s-8).), (Recommended Action: Place the Services PLIM in an upper slot 0 - 7, or in the lower slot (s = 8..15) where there is no Non-Services PLIM in the upper slot (s-8).)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RIB_QUERY_ORA-3-ORABUILD ### Response: (Severity: 3), (Category: ROUTING), (Description: There was an internal software error in the routing policy library and as a result routing policy may not be applied correctly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLACED-3-SYSDB_STARTUPLIST ### Response: (Severity: 3), (Category: OS), (Description: Unable to prepare startup list.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support sysdb<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support sysdb<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: EIGRP-6-EVENT ### Response: (Severity: 6), (Category: ROUTING), (Description: An EIGRP event logged into the trace buffer.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: HFR_IPV4_MRIB-3-CHKPT_ERR ### Response: (Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LDP-4-RX_UNEXPECTED_MSG_TYPE ### Response: (Severity: 4), (Category: ROUTING), (Description: An unexpected message type is received from peer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ELO-3-RESYNC_END_ERROR ### Response: (Severity: 3), (Category: L2), (Description: The Ethernet Link OAM Daemon failed to resync with SPIO upon startup or a process restart. This is due to an LWM failure when sending a message between the main and packet threads within Ethernet Link OAM daemon. The operation will not be retried - the internal state of Ethernet Link OAM may not match the global system state.), (Recommended Action: Try restarting the Ethernet Link OAM Daemon using the 'process restart' command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the purpose of the MPLS VPN central services feature? ### Response: The MPLS VPN central services feature allows MPLS VPN providers to offer centralized services, such as Internet access, to VPN customers. It enables traffic from VPN sites to be routed to a central site for services before reaching its final destination. Central services VPNs are implemented using route targets and BGP route importation at the central services PE router.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: G_PLIM_QOS-3-ERROR ### Response: (Severity: 3), (Category: PLATFORM), (Description: %s - Sysdb error message), (Recommended Action: *SUPPORT*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PPPOE_MA-6-INFO_MAC_SES_THRESHOLD_NOT_EXCD ### Response: (Severity: 6), (Category: SUBSCRIBER), (Description: The number of PPPoE sessions from a particular MAC address has exceeded the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RSP_CPUCTRL-2-DTI_PROGRAM_ERR ### Response: (Severity: 2), (Category: PLATFORM), (Description: RSP DTI FPGA program failure with latest FPGA version. FPGA is programmed with golden image version.), (Recommended Action: Reset the board. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PMIPV6-3-NOT_LMA_FOR_THIS_MOBILE_NODE_1 ### Response: (Severity: 3), (Category: IP), (Description: Default MN profile is enabled for this LMA. But the default MN profile is not configured under the domain.), (Recommended Action: Either configure default MN profile under the domain or remove default MN profile configuration from the LMA configuration. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_SSP_INTR_SP0_RX_NEOP_ERR_P_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_SSP_INTR_SP0_RX_NEOP_ERR_P interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_FI_INTR_RCTL0_HI_OVERRUN_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_FI_INTR_RCTL0_HI_OVERRUN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLIM_LIB-3-ERROR ### Response: (Severity: 3), (Category: L2), (Description: A fatal error occurred in the plim library driver which involves exiting the process.), (Recommended Action: collect the info from 'show diag', 'show hfr', 'show inv' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the purpose of the MPLS TE path-option loose feature? ### Response: The MPLS TE path-option loose feature allows an explicit path to be specified using a combination of strict and loose hops. Strict hops must be directly connected to the previous hop, while loose hops are not required to be directly connected. Loose hops provide more flexibility in the path calculation.