gear_type
stringclasses 5
values | split
stringclasses 1
value | prompt
dict | dxf_content
stringlengths 35
6.33k
|
|---|---|---|---|
Internal Gear | train | {
"Allowable Torque (Nm)": null,
"Backlash Adjustment": null,
"Bending Strength (Nm)": "15.4",
"Bore Diameter (mm)": null,
"Catalog Number": "SI0.8-60",
"DXF path": "gear_dxf/SI0.8-60",
"Hand of Thread": null,
"Heat Treatment": "-",
"Helix Angle": null,
"Helix Hand": null,
"Material": "S45C",
"Module": "0.8",
"Mounting Distance (mm)": null,
"Number of Teeth": "60",
"Outside Diameter (mm)": "75",
"Pitch Diameter (mm)": "48",
"Precision Grade": "Equivalent to JIS N8",
"Pressure Angle": "20°",
"Reduction Ratio": null,
"Reference Section of Gear": null,
"Reference section of gear": null,
"Surface Durability (Nm)": "2.87",
"Tooth Finish": "Cut",
"Tooth Hardness": "Less than 194HB",
"Type": "Internal Gear",
"Weight": "0.16",
"info": "Internal Gears, Module 0.8, 60 Teeth, Carbon Steel, 8mm Face Width, Pressure Angle 20° | SI0.8-60"
} | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 51.7 20 71.4 30 0.0 11 59.7 21 71.4 31 0.0 0 LINE 8 0 62 4 10 51.7 20 21.4 30 0.0 11 59.7 21 21.4 31 0.0 0 LINE 8 0 62 4 10 59.7 20 69.9 30 0.0 11 59.4 21 69.6 31 0.0 0 LINE 8 0 62 4 10 59.7 20 22.9 30 0.0 11 59.4 21 23.2 31 0.0 0 LINE 8 0 62 4 10 51.7 20 22.9 30 0.0 11 52.0 21 23.2 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 51.7 20 69.9 30 0.0 70 0 0 VERTEX 8 0 10 52.0 20 69.6 30 0.0 70 0 0 VERTEX 8 0 10 52.0 20 23.2 30 0.0 70 0 0 VERTEX 8 0 10 59.4 20 23.2 30 0.0 70 0 0 VERTEX 8 0 10 59.4 20 69.6 30 0.0 70 0 0 VERTEX 8 0 10 52.0 20 69.6 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 51.7 20 22.9 30 0.0 70 0 0 VERTEX 8 0 10 51.7 20 9.2 30 0.0 70 0 0 VERTEX 8 0 10 52.0 20 8.9 30 0.0 70 0 0 VERTEX 8 0 10 59.4 20 8.9 30 0.0 70 0 0 VERTEX 8 0 10 59.7 20 9.2 30 0.0 70 0 0 VERTEX 8 0 10 59.7 20 83.6 30 0.0 70 0 0 VERTEX 8 0 10 59.4 20 83.9 30 0.0 70 0 0 VERTEX 8 0 10 52.0 20 83.9 30 0.0 70 0 0 VERTEX 8 0 10 51.7 20 83.6 30 0.0 70 0 0 VERTEX 8 0 10 51.7 20 22.9 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | {
"Allowable Torque (Nm)": null,
"Backlash Adjustment": null,
"Bending Strength (Nm)": "38.8",
"Bore Diameter (mm)": null,
"Catalog Number": "SI1-80",
"DXF path": "gear_dxf/SI1-80",
"Hand of Thread": null,
"Heat Treatment": "-",
"Helix Angle": null,
"Helix Hand": null,
"Material": "S45C",
"Module": "1",
"Mounting Distance (mm)": null,
"Number of Teeth": "80",
"Outside Diameter (mm)": "110",
"Pitch Diameter (mm)": "80",
"Precision Grade": "JIS N8",
"Pressure Angle": "20°",
"Reduction Ratio": null,
"Reference Section of Gear": null,
"Reference section of gear": null,
"Surface Durability (Nm)": "6.59",
"Tooth Finish": "Cut",
"Tooth Hardness": "Less than 194HB",
"Type": "Internal Gear",
"Weight": "0.35",
"info": "Internal Gears, Module 1.0, 80 Teeth, Carbon Steel, 10mm Face Width, Pressure Angle 20° | SI1-80"
} | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 76.8 20 109.3 30 0.0 11 86.8 21 109.3 31 0.0 0 LINE 8 0 62 4 10 76.8 20 26.8 30 0.0 11 86.8 21 26.8 31 0.0 0 LINE 8 0 62 4 10 86.8 20 107.5 30 0.0 11 86.3 21 107.0 31 0.0 0 LINE 8 0 62 4 10 86.8 20 28.5 30 0.0 11 86.3 21 29.0 31 0.0 0 LINE 8 0 62 4 10 76.8 20 28.5 30 0.0 11 77.3 21 29.0 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 76.8 20 107.5 30 0.0 70 0 0 VERTEX 8 0 10 77.3 20 107.0 30 0.0 70 0 0 VERTEX 8 0 10 77.3 20 29.0 30 0.0 70 0 0 VERTEX 8 0 10 86.3 20 29.0 30 0.0 70 0 0 VERTEX 8 0 10 86.3 20 107.0 30 0.0 70 0 0 VERTEX 8 0 10 77.3 20 107.0 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 76.8 20 28.5 30 0.0 70 0 0 VERTEX 8 0 10 76.8 20 13.5 30 0.0 70 0 0 VERTEX 8 0 10 77.3 20 13.0 30 0.0 70 0 0 VERTEX 8 0 10 86.3 20 13.0 30 0.0 70 0 0 VERTEX 8 0 10 86.8 20 13.5 30 0.0 70 0 0 VERTEX 8 0 10 86.8 20 122.5 30 0.0 70 0 0 VERTEX 8 0 10 86.3 20 123.0 30 0.0 70 0 0 VERTEX 8 0 10 77.3 20 123.0 30 0.0 70 0 0 VERTEX 8 0 10 76.8 20 122.5 30 0.0 70 0 0 VERTEX 8 0 10 76.8 20 28.5 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | {
"Allowable Torque (Nm)": null,
"Backlash Adjustment": null,
"Bending Strength (Nm)": "413.1",
"Bore Diameter (mm)": null,
"Catalog Number": "SIR2-120",
"DXF path": "gear_dxf/SIR2-120",
"Hand of Thread": null,
"Heat Treatment": "-",
"Helix Angle": null,
"Helix Hand": null,
"Material": "S45C",
"Module": "2",
"Mounting Distance (mm)": null,
"Number of Teeth": "120",
"Outside Diameter (mm)": "286",
"Pitch Diameter (mm)": "240",
"Precision Grade": "JIS N9",
"Pressure Angle": "20°",
"Reduction Ratio": null,
"Reference Section of Gear": null,
"Reference section of gear": null,
"Surface Durability (Nm)": "68.82",
"Tooth Finish": "Cut",
"Tooth Hardness": "Less than 194HB",
"Type": "Internal Gear",
"Weight": "2.98",
"info": "Internal Gears, Module 2.0, 120 Teeth, Carbon Steel, 20mm Face Width, Pressure Angle 20° | SIR2-120"
} | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 202.6 20 299.3 30 0.0 11 222.6 21 299.3 31 0.0 0 LINE 8 0 62 4 10 202.6 20 54.3 30 0.0 11 222.6 21 54.3 31 0.0 0 LINE 8 0 62 4 10 222.6 20 295.6 30 0.0 11 221.8 21 294.8 31 0.0 0 LINE 8 0 62 4 10 222.6 20 58.0 30 0.0 11 221.8 21 58.8 31 0.0 0 LINE 8 0 62 4 10 202.6 20 58.0 30 0.0 11 203.4 21 58.8 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 202.6 20 295.6 30 0.0 70 0 0 VERTEX 8 0 10 203.4 20 294.8 30 0.0 70 0 0 VERTEX 8 0 10 203.4 20 58.8 30 0.0 70 0 0 VERTEX 8 0 10 221.8 20 58.8 30 0.0 70 0 0 VERTEX 8 0 10 221.8 20 294.8 30 0.0 70 0 0 VERTEX 8 0 10 203.4 20 294.8 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 202.6 20 58.0 30 0.0 70 0 0 VERTEX 8 0 10 202.6 20 34.6 30 0.0 70 0 0 VERTEX 8 0 10 203.4 20 33.8 30 0.0 70 0 0 VERTEX 8 0 10 221.8 20 33.8 30 0.0 70 0 0 VERTEX 8 0 10 222.6 20 34.6 30 0.0 70 0 0 VERTEX 8 0 10 222.6 20 319.0 30 0.0 70 0 0 VERTEX 8 0 10 221.8 20 319.8 30 0.0 70 0 0 VERTEX 8 0 10 203.4 20 319.8 30 0.0 70 0 0 VERTEX 8 0 10 202.6 20 319.0 30 0.0 70 0 0 VERTEX 8 0 10 202.6 20 58.0 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | {
"Allowable Torque (Nm)": null,
"Backlash Adjustment": null,
"Bending Strength (Nm)": "3.75",
"Bore Diameter (mm)": null,
"Catalog Number": "SI0.5-60",
"DXF path": "gear_dxf/SI0.5-60",
"Hand of Thread": null,
"Heat Treatment": "-",
"Helix Angle": null,
"Helix Hand": null,
"Material": "S45C",
"Module": "0.5",
"Mounting Distance (mm)": null,
"Number of Teeth": "60",
"Outside Diameter (mm)": "50",
"Pitch Diameter (mm)": "30",
"Precision Grade": "Equivalent to JIS N8",
"Pressure Angle": "20°",
"Reduction Ratio": null,
"Reference Section of Gear": null,
"Reference section of gear": null,
"Surface Durability (Nm)": "0.67",
"Tooth Finish": "Cut",
"Tooth Hardness": "Less than 194HB",
"Type": "Internal Gear",
"Weight": "0.05",
"info": "Internal Gears, Module 0.5, 60 Teeth, Carbon Steel, 5mm Face Width, Pressure Angle 20° | SI0.5-60"
} | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 34.7 20 46.5 30 0.0 11 39.7 21 46.5 31 0.0 0 LINE 8 0 62 4 10 34.7 20 15.3 30 0.0 11 39.7 21 15.3 31 0.0 0 LINE 8 0 62 4 10 39.7 20 45.7 30 0.0 11 39.4 21 45.4 31 0.0 0 LINE 8 0 62 4 10 39.7 20 16.1 30 0.0 11 39.4 21 16.4 31 0.0 0 LINE 8 0 62 4 10 34.7 20 16.1 30 0.0 11 35.0 21 16.4 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 34.7 20 45.7 30 0.0 70 0 0 VERTEX 8 0 10 35.0 20 45.4 30 0.0 70 0 0 VERTEX 8 0 10 35.0 20 16.4 30 0.0 70 0 0 VERTEX 8 0 10 39.4 20 16.4 30 0.0 70 0 0 VERTEX 8 0 10 39.4 20 45.4 30 0.0 70 0 0 VERTEX 8 0 10 35.0 20 45.4 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 34.7 20 16.1 30 0.0 70 0 0 VERTEX 8 0 10 34.7 20 6.2 30 0.0 70 0 0 VERTEX 8 0 10 35.0 20 5.9 30 0.0 70 0 0 VERTEX 8 0 10 39.4 20 5.9 30 0.0 70 0 0 VERTEX 8 0 10 39.7 20 6.2 30 0.0 70 0 0 VERTEX 8 0 10 39.7 20 55.6 30 0.0 70 0 0 VERTEX 8 0 10 39.4 20 55.9 30 0.0 70 0 0 VERTEX 8 0 10 35.0 20 55.9 30 0.0 70 0 0 VERTEX 8 0 10 34.7 20 55.6 30 0.0 70 0 0 VERTEX 8 0 10 34.7 20 16.1 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | {
"Allowable Torque (Nm)": null,
"Backlash Adjustment": null,
"Bending Strength (Nm)": "101.3",
"Bore Diameter (mm)": null,
"Catalog Number": "SI1.5-60",
"DXF path": "gear_dxf/SI1.5-60",
"Hand of Thread": null,
"Heat Treatment": "-",
"Helix Angle": null,
"Helix Hand": null,
"Material": "S45C",
"Module": "1.5",
"Mounting Distance (mm)": null,
"Number of Teeth": "60",
"Outside Diameter (mm)": "130",
"Pitch Diameter (mm)": "90",
"Precision Grade": "JIS N8",
"Pressure Angle": "20°",
"Reduction Ratio": null,
"Reference Section of Gear": null,
"Reference section of gear": null,
"Surface Durability (Nm)": "20.59",
"Tooth Finish": "Cut",
"Tooth Hardness": "Less than 194HB",
"Type": "Internal Gear",
"Weight": "0.81",
"info": "Internal Gears, Module 1.5, 60 Teeth, Carbon Steel, 15mm Face Width, Pressure Angle 20° | SI1.5-60"
} | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 89.1 20 127.2 30 0.0 11 104.1 21 127.2 31 0.0 0 LINE 8 0 62 4 10 89.1 20 33.5 30 0.0 11 104.1 21 33.5 31 0.0 0 LINE 8 0 62 4 10 104.1 20 124.7 30 0.0 11 103.3 21 123.9 31 0.0 0 LINE 8 0 62 4 10 104.1 20 36.1 30 0.0 11 103.3 21 36.9 31 0.0 0 LINE 8 0 62 4 10 89.1 20 36.1 30 0.0 11 89.9 21 36.9 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 89.1 20 124.7 30 0.0 70 0 0 VERTEX 8 0 10 89.9 20 123.9 30 0.0 70 0 0 VERTEX 8 0 10 89.9 20 36.9 30 0.0 70 0 0 VERTEX 8 0 10 103.3 20 36.9 30 0.0 70 0 0 VERTEX 8 0 10 103.3 20 123.9 30 0.0 70 0 0 VERTEX 8 0 10 89.9 20 123.9 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 89.1 20 36.1 30 0.0 70 0 0 VERTEX 8 0 10 89.1 20 16.2 30 0.0 70 0 0 VERTEX 8 0 10 89.9 20 15.4 30 0.0 70 0 0 VERTEX 8 0 10 103.3 20 15.4 30 0.0 70 0 0 VERTEX 8 0 10 104.1 20 16.2 30 0.0 70 0 0 VERTEX 8 0 10 104.1 20 144.6 30 0.0 70 0 0 VERTEX 8 0 10 103.3 20 145.4 30 0.0 70 0 0 VERTEX 8 0 10 89.9 20 145.4 30 0.0 70 0 0 VERTEX 8 0 10 89.1 20 144.6 30 0.0 70 0 0 VERTEX 8 0 10 89.1 20 36.1 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | {
"Allowable Torque (Nm)": null,
"Backlash Adjustment": null,
"Bending Strength (Nm)": "1394",
"Bore Diameter (mm)": null,
"Catalog Number": "SIR3-120",
"DXF path": "gear_dxf/SIR3-120",
"Hand of Thread": null,
"Heat Treatment": "-",
"Helix Angle": null,
"Helix Hand": null,
"Material": "S45C",
"Module": "3",
"Mounting Distance (mm)": null,
"Number of Teeth": "120",
"Outside Diameter (mm)": "424",
"Pitch Diameter (mm)": "360",
"Precision Grade": "JIS N9",
"Pressure Angle": "20°",
"Reduction Ratio": null,
"Reference Section of Gear": null,
"Reference section of gear": null,
"Surface Durability (Nm)": "244.1",
"Tooth Finish": "Cut",
"Tooth Hardness": "Less than 194HB",
"Type": "Internal Gear",
"Weight": "9.28",
"info": "Internal Gears, Module 3.0, 120 Teeth, Carbon Steel, 30mm Face Width, Pressure Angle 20° | SIR3-120"
} | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 300.1 20 445.9 30 0.0 11 330.1 21 445.9 31 0.0 0 LINE 8 0 62 4 10 300.1 20 78.4 30 0.0 11 330.1 21 78.4 31 0.0 0 LINE 8 0 62 4 10 330.1 20 440.1 30 0.0 11 329.1 21 439.1 31 0.0 0 LINE 8 0 62 4 10 330.1 20 84.1 30 0.0 11 329.1 21 85.1 31 0.0 0 LINE 8 0 62 4 10 300.1 20 84.1 30 0.0 11 301.1 21 85.1 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 300.1 20 440.1 30 0.0 70 0 0 VERTEX 8 0 10 301.1 20 439.1 30 0.0 70 0 0 VERTEX 8 0 10 301.1 20 85.1 30 0.0 70 0 0 VERTEX 8 0 10 329.1 20 85.1 30 0.0 70 0 0 VERTEX 8 0 10 329.1 20 439.1 30 0.0 70 0 0 VERTEX 8 0 10 301.1 20 439.1 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 300.1 20 84.1 30 0.0 70 0 0 VERTEX 8 0 10 300.1 20 51.1 30 0.0 70 0 0 VERTEX 8 0 10 301.1 20 50.1 30 0.0 70 0 0 VERTEX 8 0 10 329.1 20 50.1 30 0.0 70 0 0 VERTEX 8 0 10 330.1 20 51.1 30 0.0 70 0 0 VERTEX 8 0 10 330.1 20 473.1 30 0.0 70 0 0 VERTEX 8 0 10 329.1 20 474.1 30 0.0 70 0 0 VERTEX 8 0 10 301.1 20 474.1 30 0.0 70 0 0 VERTEX 8 0 10 300.1 20 473.1 30 0.0 70 0 0 VERTEX 8 0 10 300.1 20 84.1 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | {
"Allowable Torque (Nm)": null,
"Backlash Adjustment": null,
"Bending Strength (Nm)": "310.7",
"Bore Diameter (mm)": null,
"Catalog Number": "SI2-80",
"DXF path": "gear_dxf/SI2-80",
"Hand of Thread": null,
"Heat Treatment": "-",
"Helix Angle": null,
"Helix Hand": null,
"Material": "S45C",
"Module": "2",
"Mounting Distance (mm)": null,
"Number of Teeth": "80",
"Outside Diameter (mm)": "210",
"Pitch Diameter (mm)": "160",
"Precision Grade": "JIS N8",
"Pressure Angle": "20°",
"Reduction Ratio": null,
"Reference Section of Gear": null,
"Reference section of gear": null,
"Surface Durability (Nm)": "57",
"Tooth Finish": "Cut",
"Tooth Hardness": "Less than 194HB",
"Type": "Internal Gear",
"Weight": "2.28",
"info": "Internal Gears, Module 2.0, 80 Teeth, Carbon Steel, 20mm Face Width, Pressure Angle 20° | SI2-80"
} | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 146.1 20 212.3 30 0.0 11 166.1 21 212.3 31 0.0 0 LINE 8 0 62 4 10 146.1 20 47.3 30 0.0 11 166.1 21 47.3 31 0.0 0 LINE 8 0 62 4 10 166.1 20 208.6 30 0.0 11 165.3 21 207.8 31 0.0 0 LINE 8 0 62 4 10 166.1 20 51.0 30 0.0 11 165.3 21 51.8 31 0.0 0 LINE 8 0 62 4 10 146.1 20 51.0 30 0.0 11 146.9 21 51.8 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 146.1 20 208.6 30 0.0 70 0 0 VERTEX 8 0 10 146.9 20 207.8 30 0.0 70 0 0 VERTEX 8 0 10 146.9 20 51.8 30 0.0 70 0 0 VERTEX 8 0 10 165.3 20 51.8 30 0.0 70 0 0 VERTEX 8 0 10 165.3 20 207.8 30 0.0 70 0 0 VERTEX 8 0 10 146.9 20 207.8 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 146.1 20 51.0 30 0.0 70 0 0 VERTEX 8 0 10 146.1 20 25.6 30 0.0 70 0 0 VERTEX 8 0 10 146.9 20 24.8 30 0.0 70 0 0 VERTEX 8 0 10 165.3 20 24.8 30 0.0 70 0 0 VERTEX 8 0 10 166.1 20 25.6 30 0.0 70 0 0 VERTEX 8 0 10 166.1 20 234.0 30 0.0 70 0 0 VERTEX 8 0 10 165.3 20 234.8 30 0.0 70 0 0 VERTEX 8 0 10 146.9 20 234.8 30 0.0 70 0 0 VERTEX 8 0 10 146.1 20 234.0 30 0.0 70 0 0 VERTEX 8 0 10 146.1 20 51.0 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | {
"Allowable Torque (Nm)": null,
"Backlash Adjustment": null,
"Bending Strength (Nm)": "1839",
"Bore Diameter (mm)": null,
"Catalog Number": "SIR3-160",
"DXF path": "gear_dxf/SIR3-160",
"Hand of Thread": null,
"Heat Treatment": "-",
"Helix Angle": null,
"Helix Hand": null,
"Material": "S45C",
"Module": "3",
"Mounting Distance (mm)": null,
"Number of Teeth": "160",
"Outside Diameter (mm)": "544",
"Pitch Diameter (mm)": "480",
"Precision Grade": "JIS N9",
"Pressure Angle": "20°",
"Reduction Ratio": null,
"Reference Section of Gear": null,
"Reference section of gear": null,
"Surface Durability (Nm)": "315.1",
"Tooth Finish": "Cut",
"Tooth Hardness": "Less than 194HB",
"Type": "Internal Gear",
"Weight": "12.12",
"info": "Internal Gears, Module 3.0, 160 Teeth, Carbon Steel, 30mm Face Width, Pressure Angle 20° | SIR3-160"
} | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 389.3 20 580.1 30 0.0 11 419.3 21 580.1 31 0.0 0 LINE 8 0 62 4 10 389.3 20 92.6 30 0.0 11 419.3 21 92.6 31 0.0 0 LINE 8 0 62 4 10 419.3 20 574.3 30 0.0 11 418.3 21 573.3 31 0.0 0 LINE 8 0 62 4 10 419.3 20 98.3 30 0.0 11 418.3 21 99.3 31 0.0 0 LINE 8 0 62 4 10 389.3 20 98.3 30 0.0 11 390.3 21 99.3 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 389.3 20 574.3 30 0.0 70 0 0 VERTEX 8 0 10 390.3 20 573.3 30 0.0 70 0 0 VERTEX 8 0 10 390.3 20 99.3 30 0.0 70 0 0 VERTEX 8 0 10 418.3 20 99.3 30 0.0 70 0 0 VERTEX 8 0 10 418.3 20 573.3 30 0.0 70 0 0 VERTEX 8 0 10 390.3 20 573.3 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 389.3 20 98.3 30 0.0 70 0 0 VERTEX 8 0 10 389.3 20 65.3 30 0.0 70 0 0 VERTEX 8 0 10 390.3 20 64.3 30 0.0 70 0 0 VERTEX 8 0 10 418.3 20 64.3 30 0.0 70 0 0 VERTEX 8 0 10 419.3 20 65.3 30 0.0 70 0 0 VERTEX 8 0 10 419.3 20 607.3 30 0.0 70 0 0 VERTEX 8 0 10 418.3 20 608.3 30 0.0 70 0 0 VERTEX 8 0 10 390.3 20 608.3 30 0.0 70 0 0 VERTEX 8 0 10 389.3 20 607.3 30 0.0 70 0 0 VERTEX 8 0 10 389.3 20 98.3 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | {
"Allowable Torque (Nm)": null,
"Backlash Adjustment": null,
"Bending Strength (Nm)": "382.4",
"Bore Diameter (mm)": null,
"Catalog Number": "SI2-100",
"DXF path": "gear_dxf/SI2-100",
"Hand of Thread": null,
"Heat Treatment": "-",
"Helix Angle": null,
"Helix Hand": null,
"Material": "S45C",
"Module": "2",
"Mounting Distance (mm)": null,
"Number of Teeth": "100",
"Outside Diameter (mm)": "250",
"Pitch Diameter (mm)": "200",
"Precision Grade": "JIS N8",
"Pressure Angle": "20°",
"Reduction Ratio": null,
"Reference Section of Gear": null,
"Reference section of gear": null,
"Surface Durability (Nm)": "65.7",
"Tooth Finish": "Cut",
"Tooth Hardness": "Less than 194HB",
"Type": "Internal Gear",
"Weight": "2.77",
"info": "Internal Gears, Module 2.0, 100 Teeth, Carbon Steel, 20mm Face Width, Pressure Angle 20° | SI2-100"
} | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 175.8 20 257.1 30 0.0 11 195.8 21 257.1 31 0.0 0 LINE 8 0 62 4 10 175.8 20 52.1 30 0.0 11 195.8 21 52.1 31 0.0 0 LINE 8 0 62 4 10 195.8 20 253.4 30 0.0 11 195.0 21 252.6 31 0.0 0 LINE 8 0 62 4 10 195.8 20 55.8 30 0.0 11 195.0 21 56.6 31 0.0 0 LINE 8 0 62 4 10 175.8 20 55.8 30 0.0 11 176.6 21 56.6 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 175.8 20 253.4 30 0.0 70 0 0 VERTEX 8 0 10 176.6 20 252.6 30 0.0 70 0 0 VERTEX 8 0 10 176.6 20 56.6 30 0.0 70 0 0 VERTEX 8 0 10 195.0 20 56.6 30 0.0 70 0 0 VERTEX 8 0 10 195.0 20 252.6 30 0.0 70 0 0 VERTEX 8 0 10 176.6 20 252.6 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 175.8 20 55.8 30 0.0 70 0 0 VERTEX 8 0 10 175.8 20 30.4 30 0.0 70 0 0 VERTEX 8 0 10 176.6 20 29.6 30 0.0 70 0 0 VERTEX 8 0 10 195.0 20 29.6 30 0.0 70 0 0 VERTEX 8 0 10 195.8 20 30.4 30 0.0 70 0 0 VERTEX 8 0 10 195.8 20 278.8 30 0.0 70 0 0 VERTEX 8 0 10 195.0 20 279.6 30 0.0 70 0 0 VERTEX 8 0 10 176.6 20 279.6 30 0.0 70 0 0 VERTEX 8 0 10 175.8 20 278.8 30 0.0 70 0 0 VERTEX 8 0 10 175.8 20 55.8 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | {
"Allowable Torque (Nm)": null,
"Backlash Adjustment": null,
"Bending Strength (Nm)": "206.3",
"Bore Diameter (mm)": null,
"Catalog Number": "SI2-50",
"DXF path": "gear_dxf/SI2-50",
"Hand of Thread": null,
"Heat Treatment": "-",
"Helix Angle": null,
"Helix Hand": null,
"Material": "S45C",
"Module": "2",
"Mounting Distance (mm)": null,
"Number of Teeth": "50",
"Outside Diameter (mm)": "150",
"Pitch Diameter (mm)": "100",
"Precision Grade": "JIS N8",
"Pressure Angle": "20°",
"Reduction Ratio": null,
"Reference Section of Gear": null,
"Reference section of gear": null,
"Surface Durability (Nm)": "50.3",
"Tooth Finish": "Cut",
"Tooth Hardness": "Less than 194HB",
"Type": "Internal Gear",
"Weight": "1.54",
"info": "Internal Gears, Module 2.0, 50 Teeth, Carbon Steel, 20mm Face Width, Pressure Angle 20° | SI2-50"
} | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 101.5 20 145.2 30 0.0 11 121.5 21 145.2 31 0.0 0 LINE 8 0 62 4 10 101.5 20 40.2 30 0.0 11 121.5 21 40.2 31 0.0 0 LINE 8 0 62 4 10 121.5 20 141.5 30 0.0 11 120.7 21 140.7 31 0.0 0 LINE 8 0 62 4 10 121.5 20 43.9 30 0.0 11 120.7 21 44.7 31 0.0 0 LINE 8 0 62 4 10 101.5 20 43.9 30 0.0 11 102.3 21 44.7 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 101.5 20 141.5 30 0.0 70 0 0 VERTEX 8 0 10 102.3 20 140.7 30 0.0 70 0 0 VERTEX 8 0 10 102.3 20 44.7 30 0.0 70 0 0 VERTEX 8 0 10 120.7 20 44.7 30 0.0 70 0 0 VERTEX 8 0 10 120.7 20 140.7 30 0.0 70 0 0 VERTEX 8 0 10 102.3 20 140.7 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 101.5 20 43.9 30 0.0 70 0 0 VERTEX 8 0 10 101.5 20 18.5 30 0.0 70 0 0 VERTEX 8 0 10 102.3 20 17.7 30 0.0 70 0 0 VERTEX 8 0 10 120.7 20 17.7 30 0.0 70 0 0 VERTEX 8 0 10 121.5 20 18.5 30 0.0 70 0 0 VERTEX 8 0 10 121.5 20 166.9 30 0.0 70 0 0 VERTEX 8 0 10 120.7 20 167.7 30 0.0 70 0 0 VERTEX 8 0 10 102.3 20 167.7 30 0.0 70 0 0 VERTEX 8 0 10 101.5 20 166.9 30 0.0 70 0 0 VERTEX 8 0 10 101.5 20 43.9 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.