gear_type
stringclasses 5
values | split
stringclasses 1
value | prompt
stringlengths 312
484
| dxf_content
stringlengths 35
6.33k
|
|---|---|---|---|
Internal Gear | train | Generate a DXF file for a gear which conforms to the following description: Type: Internal Gear, Surface Durability (Nm): 2.87, Outside Diameter (mm): 75, Pitch Diameter (mm): 48, Material: S45C, Pressure Angle: 20°, Number of Teeth: 60, Tooth Finish: Cut, Bending Strength (Nm): 15.4. Ensure that the output can be directly fed to CAD software. | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 51.7 20 71.4 30 0.0 11 59.7 21 71.4 31 0.0 0 LINE 8 0 62 4 10 51.7 20 21.4 30 0.0 11 59.7 21 21.4 31 0.0 0 LINE 8 0 62 4 10 59.7 20 69.9 30 0.0 11 59.4 21 69.6 31 0.0 0 LINE 8 0 62 4 10 59.7 20 22.9 30 0.0 11 59.4 21 23.2 31 0.0 0 LINE 8 0 62 4 10 51.7 20 22.9 30 0.0 11 52.0 21 23.2 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 51.7 20 69.9 30 0.0 70 0 0 VERTEX 8 0 10 52.0 20 69.6 30 0.0 70 0 0 VERTEX 8 0 10 52.0 20 23.2 30 0.0 70 0 0 VERTEX 8 0 10 59.4 20 23.2 30 0.0 70 0 0 VERTEX 8 0 10 59.4 20 69.6 30 0.0 70 0 0 VERTEX 8 0 10 52.0 20 69.6 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 51.7 20 22.9 30 0.0 70 0 0 VERTEX 8 0 10 51.7 20 9.2 30 0.0 70 0 0 VERTEX 8 0 10 52.0 20 8.9 30 0.0 70 0 0 VERTEX 8 0 10 59.4 20 8.9 30 0.0 70 0 0 VERTEX 8 0 10 59.7 20 9.2 30 0.0 70 0 0 VERTEX 8 0 10 59.7 20 83.6 30 0.0 70 0 0 VERTEX 8 0 10 59.4 20 83.9 30 0.0 70 0 0 VERTEX 8 0 10 52.0 20 83.9 30 0.0 70 0 0 VERTEX 8 0 10 51.7 20 83.6 30 0.0 70 0 0 VERTEX 8 0 10 51.7 20 22.9 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | Generate a DXF file for a gear which conforms to the following description: Outside Diameter (mm): 110, Pressure Angle: 20°, Surface Durability (Nm): 6.59, Material: S45C, Type: Internal Gear, Number of Teeth: 80, Pitch Diameter (mm): 80, Bending Strength (Nm): 38.8, Tooth Finish: Cut. Ensure that the output can be directly fed to CAD software. | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 76.8 20 109.3 30 0.0 11 86.8 21 109.3 31 0.0 0 LINE 8 0 62 4 10 76.8 20 26.8 30 0.0 11 86.8 21 26.8 31 0.0 0 LINE 8 0 62 4 10 86.8 20 107.5 30 0.0 11 86.3 21 107.0 31 0.0 0 LINE 8 0 62 4 10 86.8 20 28.5 30 0.0 11 86.3 21 29.0 31 0.0 0 LINE 8 0 62 4 10 76.8 20 28.5 30 0.0 11 77.3 21 29.0 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 76.8 20 107.5 30 0.0 70 0 0 VERTEX 8 0 10 77.3 20 107.0 30 0.0 70 0 0 VERTEX 8 0 10 77.3 20 29.0 30 0.0 70 0 0 VERTEX 8 0 10 86.3 20 29.0 30 0.0 70 0 0 VERTEX 8 0 10 86.3 20 107.0 30 0.0 70 0 0 VERTEX 8 0 10 77.3 20 107.0 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 76.8 20 28.5 30 0.0 70 0 0 VERTEX 8 0 10 76.8 20 13.5 30 0.0 70 0 0 VERTEX 8 0 10 77.3 20 13.0 30 0.0 70 0 0 VERTEX 8 0 10 86.3 20 13.0 30 0.0 70 0 0 VERTEX 8 0 10 86.8 20 13.5 30 0.0 70 0 0 VERTEX 8 0 10 86.8 20 122.5 30 0.0 70 0 0 VERTEX 8 0 10 86.3 20 123.0 30 0.0 70 0 0 VERTEX 8 0 10 77.3 20 123.0 30 0.0 70 0 0 VERTEX 8 0 10 76.8 20 122.5 30 0.0 70 0 0 VERTEX 8 0 10 76.8 20 28.5 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | Generate a DXF file for a gear which conforms to the following description: Pressure Angle: 20°, Pitch Diameter (mm): 240, Number of Teeth: 120, Bending Strength (Nm): 413.1, Surface Durability (Nm): 68.82, Outside Diameter (mm): 286, Material: S45C, Type: Internal Gear, Tooth Finish: Cut. Ensure that the output can be directly fed to CAD software. | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 202.6 20 299.3 30 0.0 11 222.6 21 299.3 31 0.0 0 LINE 8 0 62 4 10 202.6 20 54.3 30 0.0 11 222.6 21 54.3 31 0.0 0 LINE 8 0 62 4 10 222.6 20 295.6 30 0.0 11 221.8 21 294.8 31 0.0 0 LINE 8 0 62 4 10 222.6 20 58.0 30 0.0 11 221.8 21 58.8 31 0.0 0 LINE 8 0 62 4 10 202.6 20 58.0 30 0.0 11 203.4 21 58.8 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 202.6 20 295.6 30 0.0 70 0 0 VERTEX 8 0 10 203.4 20 294.8 30 0.0 70 0 0 VERTEX 8 0 10 203.4 20 58.8 30 0.0 70 0 0 VERTEX 8 0 10 221.8 20 58.8 30 0.0 70 0 0 VERTEX 8 0 10 221.8 20 294.8 30 0.0 70 0 0 VERTEX 8 0 10 203.4 20 294.8 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 202.6 20 58.0 30 0.0 70 0 0 VERTEX 8 0 10 202.6 20 34.6 30 0.0 70 0 0 VERTEX 8 0 10 203.4 20 33.8 30 0.0 70 0 0 VERTEX 8 0 10 221.8 20 33.8 30 0.0 70 0 0 VERTEX 8 0 10 222.6 20 34.6 30 0.0 70 0 0 VERTEX 8 0 10 222.6 20 319.0 30 0.0 70 0 0 VERTEX 8 0 10 221.8 20 319.8 30 0.0 70 0 0 VERTEX 8 0 10 203.4 20 319.8 30 0.0 70 0 0 VERTEX 8 0 10 202.6 20 319.0 30 0.0 70 0 0 VERTEX 8 0 10 202.6 20 58.0 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | Generate a DXF file for a gear which conforms to the following description: Tooth Finish: Cut, Bending Strength (Nm): 3.75, Pitch Diameter (mm): 30, Outside Diameter (mm): 50, Number of Teeth: 60, Surface Durability (Nm): 0.67, Type: Internal Gear, Pressure Angle: 20°, Material: S45C. Ensure that the output can be directly fed to CAD software. | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 34.7 20 46.5 30 0.0 11 39.7 21 46.5 31 0.0 0 LINE 8 0 62 4 10 34.7 20 15.3 30 0.0 11 39.7 21 15.3 31 0.0 0 LINE 8 0 62 4 10 39.7 20 45.7 30 0.0 11 39.4 21 45.4 31 0.0 0 LINE 8 0 62 4 10 39.7 20 16.1 30 0.0 11 39.4 21 16.4 31 0.0 0 LINE 8 0 62 4 10 34.7 20 16.1 30 0.0 11 35.0 21 16.4 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 34.7 20 45.7 30 0.0 70 0 0 VERTEX 8 0 10 35.0 20 45.4 30 0.0 70 0 0 VERTEX 8 0 10 35.0 20 16.4 30 0.0 70 0 0 VERTEX 8 0 10 39.4 20 16.4 30 0.0 70 0 0 VERTEX 8 0 10 39.4 20 45.4 30 0.0 70 0 0 VERTEX 8 0 10 35.0 20 45.4 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 34.7 20 16.1 30 0.0 70 0 0 VERTEX 8 0 10 34.7 20 6.2 30 0.0 70 0 0 VERTEX 8 0 10 35.0 20 5.9 30 0.0 70 0 0 VERTEX 8 0 10 39.4 20 5.9 30 0.0 70 0 0 VERTEX 8 0 10 39.7 20 6.2 30 0.0 70 0 0 VERTEX 8 0 10 39.7 20 55.6 30 0.0 70 0 0 VERTEX 8 0 10 39.4 20 55.9 30 0.0 70 0 0 VERTEX 8 0 10 35.0 20 55.9 30 0.0 70 0 0 VERTEX 8 0 10 34.7 20 55.6 30 0.0 70 0 0 VERTEX 8 0 10 34.7 20 16.1 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | Generate a DXF file for a gear which conforms to the following description: Pitch Diameter (mm): 90, Bending Strength (Nm): 101.3, Surface Durability (Nm): 20.59, Outside Diameter (mm): 130, Pressure Angle: 20°, Tooth Finish: Cut, Material: S45C, Number of Teeth: 60, Type: Internal Gear. Ensure that the output can be directly fed to CAD software. | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 89.1 20 127.2 30 0.0 11 104.1 21 127.2 31 0.0 0 LINE 8 0 62 4 10 89.1 20 33.5 30 0.0 11 104.1 21 33.5 31 0.0 0 LINE 8 0 62 4 10 104.1 20 124.7 30 0.0 11 103.3 21 123.9 31 0.0 0 LINE 8 0 62 4 10 104.1 20 36.1 30 0.0 11 103.3 21 36.9 31 0.0 0 LINE 8 0 62 4 10 89.1 20 36.1 30 0.0 11 89.9 21 36.9 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 89.1 20 124.7 30 0.0 70 0 0 VERTEX 8 0 10 89.9 20 123.9 30 0.0 70 0 0 VERTEX 8 0 10 89.9 20 36.9 30 0.0 70 0 0 VERTEX 8 0 10 103.3 20 36.9 30 0.0 70 0 0 VERTEX 8 0 10 103.3 20 123.9 30 0.0 70 0 0 VERTEX 8 0 10 89.9 20 123.9 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 89.1 20 36.1 30 0.0 70 0 0 VERTEX 8 0 10 89.1 20 16.2 30 0.0 70 0 0 VERTEX 8 0 10 89.9 20 15.4 30 0.0 70 0 0 VERTEX 8 0 10 103.3 20 15.4 30 0.0 70 0 0 VERTEX 8 0 10 104.1 20 16.2 30 0.0 70 0 0 VERTEX 8 0 10 104.1 20 144.6 30 0.0 70 0 0 VERTEX 8 0 10 103.3 20 145.4 30 0.0 70 0 0 VERTEX 8 0 10 89.9 20 145.4 30 0.0 70 0 0 VERTEX 8 0 10 89.1 20 144.6 30 0.0 70 0 0 VERTEX 8 0 10 89.1 20 36.1 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | Generate a DXF file for a gear which conforms to the following description: Pressure Angle: 20°, Tooth Finish: Cut, Bending Strength (Nm): 1394, Material: S45C, Outside Diameter (mm): 424, Type: Internal Gear, Number of Teeth: 120, Surface Durability (Nm): 244.1, Pitch Diameter (mm): 360. Ensure that the output can be directly fed to CAD software. | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 300.1 20 445.9 30 0.0 11 330.1 21 445.9 31 0.0 0 LINE 8 0 62 4 10 300.1 20 78.4 30 0.0 11 330.1 21 78.4 31 0.0 0 LINE 8 0 62 4 10 330.1 20 440.1 30 0.0 11 329.1 21 439.1 31 0.0 0 LINE 8 0 62 4 10 330.1 20 84.1 30 0.0 11 329.1 21 85.1 31 0.0 0 LINE 8 0 62 4 10 300.1 20 84.1 30 0.0 11 301.1 21 85.1 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 300.1 20 440.1 30 0.0 70 0 0 VERTEX 8 0 10 301.1 20 439.1 30 0.0 70 0 0 VERTEX 8 0 10 301.1 20 85.1 30 0.0 70 0 0 VERTEX 8 0 10 329.1 20 85.1 30 0.0 70 0 0 VERTEX 8 0 10 329.1 20 439.1 30 0.0 70 0 0 VERTEX 8 0 10 301.1 20 439.1 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 300.1 20 84.1 30 0.0 70 0 0 VERTEX 8 0 10 300.1 20 51.1 30 0.0 70 0 0 VERTEX 8 0 10 301.1 20 50.1 30 0.0 70 0 0 VERTEX 8 0 10 329.1 20 50.1 30 0.0 70 0 0 VERTEX 8 0 10 330.1 20 51.1 30 0.0 70 0 0 VERTEX 8 0 10 330.1 20 473.1 30 0.0 70 0 0 VERTEX 8 0 10 329.1 20 474.1 30 0.0 70 0 0 VERTEX 8 0 10 301.1 20 474.1 30 0.0 70 0 0 VERTEX 8 0 10 300.1 20 473.1 30 0.0 70 0 0 VERTEX 8 0 10 300.1 20 84.1 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | Generate a DXF file for a gear which conforms to the following description: Pressure Angle: 20°, Type: Internal Gear, Material: S45C, Number of Teeth: 80, Outside Diameter (mm): 210, Pitch Diameter (mm): 160, Tooth Finish: Cut, Bending Strength (Nm): 310.7, Surface Durability (Nm): 57. Ensure that the output can be directly fed to CAD software. | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 146.1 20 212.3 30 0.0 11 166.1 21 212.3 31 0.0 0 LINE 8 0 62 4 10 146.1 20 47.3 30 0.0 11 166.1 21 47.3 31 0.0 0 LINE 8 0 62 4 10 166.1 20 208.6 30 0.0 11 165.3 21 207.8 31 0.0 0 LINE 8 0 62 4 10 166.1 20 51.0 30 0.0 11 165.3 21 51.8 31 0.0 0 LINE 8 0 62 4 10 146.1 20 51.0 30 0.0 11 146.9 21 51.8 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 146.1 20 208.6 30 0.0 70 0 0 VERTEX 8 0 10 146.9 20 207.8 30 0.0 70 0 0 VERTEX 8 0 10 146.9 20 51.8 30 0.0 70 0 0 VERTEX 8 0 10 165.3 20 51.8 30 0.0 70 0 0 VERTEX 8 0 10 165.3 20 207.8 30 0.0 70 0 0 VERTEX 8 0 10 146.9 20 207.8 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 146.1 20 51.0 30 0.0 70 0 0 VERTEX 8 0 10 146.1 20 25.6 30 0.0 70 0 0 VERTEX 8 0 10 146.9 20 24.8 30 0.0 70 0 0 VERTEX 8 0 10 165.3 20 24.8 30 0.0 70 0 0 VERTEX 8 0 10 166.1 20 25.6 30 0.0 70 0 0 VERTEX 8 0 10 166.1 20 234.0 30 0.0 70 0 0 VERTEX 8 0 10 165.3 20 234.8 30 0.0 70 0 0 VERTEX 8 0 10 146.9 20 234.8 30 0.0 70 0 0 VERTEX 8 0 10 146.1 20 234.0 30 0.0 70 0 0 VERTEX 8 0 10 146.1 20 51.0 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | Generate a DXF file for a gear which conforms to the following description: Number of Teeth: 160, Tooth Finish: Cut, Pressure Angle: 20°, Material: S45C, Bending Strength (Nm): 1839, Surface Durability (Nm): 315.1, Pitch Diameter (mm): 480, Type: Internal Gear, Outside Diameter (mm): 544. Ensure that the output can be directly fed to CAD software. | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 389.3 20 580.1 30 0.0 11 419.3 21 580.1 31 0.0 0 LINE 8 0 62 4 10 389.3 20 92.6 30 0.0 11 419.3 21 92.6 31 0.0 0 LINE 8 0 62 4 10 419.3 20 574.3 30 0.0 11 418.3 21 573.3 31 0.0 0 LINE 8 0 62 4 10 419.3 20 98.3 30 0.0 11 418.3 21 99.3 31 0.0 0 LINE 8 0 62 4 10 389.3 20 98.3 30 0.0 11 390.3 21 99.3 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 389.3 20 574.3 30 0.0 70 0 0 VERTEX 8 0 10 390.3 20 573.3 30 0.0 70 0 0 VERTEX 8 0 10 390.3 20 99.3 30 0.0 70 0 0 VERTEX 8 0 10 418.3 20 99.3 30 0.0 70 0 0 VERTEX 8 0 10 418.3 20 573.3 30 0.0 70 0 0 VERTEX 8 0 10 390.3 20 573.3 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 389.3 20 98.3 30 0.0 70 0 0 VERTEX 8 0 10 389.3 20 65.3 30 0.0 70 0 0 VERTEX 8 0 10 390.3 20 64.3 30 0.0 70 0 0 VERTEX 8 0 10 418.3 20 64.3 30 0.0 70 0 0 VERTEX 8 0 10 419.3 20 65.3 30 0.0 70 0 0 VERTEX 8 0 10 419.3 20 607.3 30 0.0 70 0 0 VERTEX 8 0 10 418.3 20 608.3 30 0.0 70 0 0 VERTEX 8 0 10 390.3 20 608.3 30 0.0 70 0 0 VERTEX 8 0 10 389.3 20 607.3 30 0.0 70 0 0 VERTEX 8 0 10 389.3 20 98.3 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | Generate a DXF file for a gear which conforms to the following description: Outside Diameter (mm): 250, Surface Durability (Nm): 65.7, Material: S45C, Bending Strength (Nm): 382.4, Type: Internal Gear, Pitch Diameter (mm): 200, Pressure Angle: 20°, Tooth Finish: Cut, Number of Teeth: 100. Ensure that the output can be directly fed to CAD software. | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 175.8 20 257.1 30 0.0 11 195.8 21 257.1 31 0.0 0 LINE 8 0 62 4 10 175.8 20 52.1 30 0.0 11 195.8 21 52.1 31 0.0 0 LINE 8 0 62 4 10 195.8 20 253.4 30 0.0 11 195.0 21 252.6 31 0.0 0 LINE 8 0 62 4 10 195.8 20 55.8 30 0.0 11 195.0 21 56.6 31 0.0 0 LINE 8 0 62 4 10 175.8 20 55.8 30 0.0 11 176.6 21 56.6 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 175.8 20 253.4 30 0.0 70 0 0 VERTEX 8 0 10 176.6 20 252.6 30 0.0 70 0 0 VERTEX 8 0 10 176.6 20 56.6 30 0.0 70 0 0 VERTEX 8 0 10 195.0 20 56.6 30 0.0 70 0 0 VERTEX 8 0 10 195.0 20 252.6 30 0.0 70 0 0 VERTEX 8 0 10 176.6 20 252.6 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 175.8 20 55.8 30 0.0 70 0 0 VERTEX 8 0 10 175.8 20 30.4 30 0.0 70 0 0 VERTEX 8 0 10 176.6 20 29.6 30 0.0 70 0 0 VERTEX 8 0 10 195.0 20 29.6 30 0.0 70 0 0 VERTEX 8 0 10 195.8 20 30.4 30 0.0 70 0 0 VERTEX 8 0 10 195.8 20 278.8 30 0.0 70 0 0 VERTEX 8 0 10 195.0 20 279.6 30 0.0 70 0 0 VERTEX 8 0 10 176.6 20 279.6 30 0.0 70 0 0 VERTEX 8 0 10 175.8 20 278.8 30 0.0 70 0 0 VERTEX 8 0 10 175.8 20 55.8 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Internal Gear | train | Generate a DXF file for a gear which conforms to the following description: Bending Strength (Nm): 206.3, Type: Internal Gear, Tooth Finish: Cut, Number of Teeth: 50, Outside Diameter (mm): 150, Material: S45C, Pitch Diameter (mm): 100, Pressure Angle: 20°, Surface Durability (Nm): 50.3. Ensure that the output can be directly fed to CAD software. | 0 SECTION 2 ENTITIES 0 LINE 8 0 62 4 10 101.5 20 145.2 30 0.0 11 121.5 21 145.2 31 0.0 0 LINE 8 0 62 4 10 101.5 20 40.2 30 0.0 11 121.5 21 40.2 31 0.0 0 LINE 8 0 62 4 10 121.5 20 141.5 30 0.0 11 120.7 21 140.7 31 0.0 0 LINE 8 0 62 4 10 121.5 20 43.9 30 0.0 11 120.7 21 44.7 31 0.0 0 LINE 8 0 62 4 10 101.5 20 43.9 30 0.0 11 102.3 21 44.7 31 0.0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 101.5 20 141.5 30 0.0 70 0 0 VERTEX 8 0 10 102.3 20 140.7 30 0.0 70 0 0 VERTEX 8 0 10 102.3 20 44.7 30 0.0 70 0 0 VERTEX 8 0 10 120.7 20 44.7 30 0.0 70 0 0 VERTEX 8 0 10 120.7 20 140.7 30 0.0 70 0 0 VERTEX 8 0 10 102.3 20 140.7 30 0.0 70 0 0 SEQEND 8 0 0 POLYLINE 8 0 62 4 66 1 10 0.0 20 0.0 30 0.0 70 2 0 VERTEX 8 0 10 101.5 20 43.9 30 0.0 70 0 0 VERTEX 8 0 10 101.5 20 18.5 30 0.0 70 0 0 VERTEX 8 0 10 102.3 20 17.7 30 0.0 70 0 0 VERTEX 8 0 10 120.7 20 17.7 30 0.0 70 0 0 VERTEX 8 0 10 121.5 20 18.5 30 0.0 70 0 0 VERTEX 8 0 10 121.5 20 166.9 30 0.0 70 0 0 VERTEX 8 0 10 120.7 20 167.7 30 0.0 70 0 0 VERTEX 8 0 10 102.3 20 167.7 30 0.0 70 0 0 VERTEX 8 0 10 101.5 20 166.9 30 0.0 70 0 0 VERTEX 8 0 10 101.5 20 43.9 30 0.0 70 0 0 SEQEND 8 0 0 ENDSEC 0 EOF |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.