Dataset Viewer
generated_instruction
stringlengths 0
617
| lima_response
stringlengths 82
11.6k
| rating
int64 3
4
| explanation
stringclasses 3
values |
|---|---|---|---|
Q: How do I flip someone off without them knowing?
A:
A: The trick to flipping someone off without them knowing is to keep your middle finger well-concealed. You can do this by hiding your middle finger behind your back, or by keeping it hidden behind your other fingers. You can also keep your middle finger hidden behind a piece of clothing, like a hoodie or a scarf.
Q: What is the most disrespectful way to flip someone off?
A: | Flipping someone off is a classic nonverbal signal for showing anger and frustration toward a person. You might "flip the bird" to someone who has cut you off, insulted you, or otherwise provoked your ire. At its simplest, flipping someone off is just pointedly displaying your middle finger in their direction. More advanced techniques take on an element of comedy or performance art. Remember: when you flip someone off, you are calling him or her out – so use with caution, or be prepared for the consequences!
## Basic flip-off move
1. Give someone the finger. There is a simple straightforwardness to the classic "flip-off." Turn the back of your fist toward someone, as though you are shaking a fist at them. Then, extend your middle finger. Hold the pose and look the person in the eye. This is a quick and easy way to get the point across. Wave your finger around for emphasis. Hold it out firmly and emphatically to make sure that you get the point across.
2. Try using both hands. For added effect, whip out the "double-finger" flip-off. Flip the person off with both middle fingers at the same to show them that you are unusually angry. Do "the X": cross your middle fingers into an "X," and then hold them against your chest facing the offender.
3. Switch fingers. For a somewhat more dynamic insult, flash your left and right middle fingers at the person in rapid succession. Alternately, keep both middle fingers extended and wave them around for emphasis.
## Discreet flip-off move
1. Act like you are itching your nose. Reach up to your face as though you are going to itch your nose or your face. Look in the direction of the person that you want to flip off. Then, use your middle finger to scratch your nose while staring pointedly. The person that you are flipping off might not notice this move. However, it might give other onlookers a laugh.
2. Flip the person off behind their back. You might feel a bit better simply by releasing your anger somehow, even if the person in question doesn't actually see you. Consider whether you want to provoke a confrontation, or just get your feelings out.
## Theatrical flip-off move
1. Do the "jack-in-the-box" flip-off. Hold your fist out in front of you, knuckles facing the offender – but do not raise your middle finger yet. Then, make a fist with the other hand, and crank it in circles next to the first hand as though you are winding up an old-timey jack-in-the-box toy. As you crank, hum "Pop Goes the Weasel," the tune traditionally associated with jack-in-the-boxes. Hum and crank faster and faster as you approach the end of the tune. Then, at the final "Pop" of the "Pop Goes the Weasel" tune, extend your middle finger as though it is the jack popping out of the box. Finish humming the tune while flipping the person off. Make sure that you have the person's undivided attention. This move takes a bit of time to pull off, and you want to make sure to get the full effect.
2. Practice "the balloon." Hold your fist in front of your face and put the tip of your thumb in your mouth. Act as though you are blowing up a balloon: "blow" into your thumb, and slowly extend all of your fingers as though your breath is inflating them. Then, hold you middle finger of the "balloon hand" with your other hand, and move the thumb away from your mouth. Slowly close the other fingers on your "balloon hand" until only your middle finger is left pointing at the person whom you want to flip off.
3. Pretend to "find" your middle finger. Act as though you are looking for something: in your pocket, or between the couch cushions, or in a desk drawer. Make sure that you get the person's attention. Then, make a show of being relieved that you have found the thing you're looking for. Turn to show the person what you found: and flip them off! Alternately, lean down in front of the person as though you are picking something up off of the ground. Come up flashing your middle finger, and say, "Did you drop this?"
4. Try "the trumpet." Blow on your thumb while pretending to play the trumpet, and flail your fingers as though you are hitting the valves. Periodically hold up only your middle finger. Add some musical effects for style!
5. Try the "double extreme." Extend the middle fingers of both hands. Then, bring your arms behind your back and through your legs. You should have both middle fingers clearly presented. Note: only people with long arms can pull this off.
| 4 | Short explanation... |
1. What is the brave young boy's name?
2. How many days did he spend trapped in the tower?
3. What was the tower made of?
4. What was the tower painted?
5. What did the brave young boy think?
6. What did the mean evil villain tell him?
7. What did the brave young boy start to forget?
8. What did the federal agents tell the brave young boy?
9. What did the federal agents tell the brave young boy?
10. What did the federal | Once upon a time, a brave young boy was trapped in a giant tower.
The tower was made of metal and painted black.
The tower had no windows.
The tower was a scary place.
*How I want to smell the grass again*, the brave young boy thought, *and swim in the sea like a dolphin, and watch the clouds again like a happy bird.*
"Not today. Not ever," the mean evil villain told him, as he shut and locked the door. He owned the tower, and he wasn't going to let him leave.
As the days passed, the brave young boy started to forget it all.
He forgot the smell of the grass.
He forgot the feeling of the sea.
And somehow, he started to forget the fluffy white clouds, when he heard a *knock knock knock* on the door.
"Hello?" the brave young boy answered.
It was a pair of federal agents in vests and sunglasses. They unlocked and opened the door.
Sunshine and fresh air filled the room.
They told the brave young boy that thanks to an unexpected leak of classified information, the mean evil villain had just been arrested on charges of fraud, money laundering, unlawful espionage, corporate warfare, and 117 infractions of the Mumbai Accords.
In other words, they told him, the brave young boy was free to go. | 4 | Short explanation... |
In Java, is it considered a best practice to override the ```equals``` method? | The answer is mostly, it is a valid guideline, but perhaps not a valid rule. It also doesn't tell the whole story.
The point being made is that for mutable types, you cannot base the hash code on the mutable data because two equal objects must return the same hash code and the hash code has to be valid for the lifetime of the object. If the hash code changes, you end up with an object that gets lost in a hashed collection because it no longer lives in the correct hash bin.
For example, object A returns hash of 1. So, it goes in bin 1 of the hash table. Then you change object A such that it returns a hash of 2. When a hash table goes looking for it, it looks in bin 2 and can't find it - the object is orphaned in bin 1. This is why the hash code must not change for the lifetime of the object, and just one reason why writing GetHashCode implementations is a pain in the butt.
A guideline is just a guide, not a rule. In reality, ```GetHashCode``` only has to follow these guidelines when things expect the object to follow the guidelines, such as when it is being stored in a hash table. If you never intend to use your objects in hash tables (or anything else that relies on the rules of ```GetHashCode```), your implementation doesn't need to follow the guidelines. When you see "for the lifetime of the object", you should read "for the time the object needs to co-operate with hash tables" or similar. Like most things, ```GetHashCode``` is about knowing when to break the rules. | 4 | Short explanation... |
I have a button with an image in it. When the button is clicked, I want to scale the image to fill the screen. I have tried setting the button's layout_width to "match_parent" and layout_height to "wrap_content" but it doesn't scale.
How do I make it scale? | * Yes, by default Android will scale your image down to fit the ImageView, maintaining the aspect ratio. However, make sure you're setting the image to the ImageView using ```android:src="..."``` rather than ```android:background="..."```. ```src=``` makes it scale the image maintaining aspect ratio, but ```background=``` makes it scale and distort the image to make it fit exactly to the size of the ImageView. (You can use a background and a source at the same time though, which can be useful for things like displaying a frame around the main image, using just one ImageView.)
* You should also see ```android:adjustViewBounds``` to make the ImageView resize itself to fit the rescaled image. For example, if you have a rectangular image in what would normally be a square ImageView, adjustViewBounds=true will make it resize the ImageView to be rectangular as well. This then affects how other Views are laid out around the ImageView.
Then as Samuh wrote, you can change the way it default scales images using the ```android:scaleType``` parameter.
By the way, the easiest way to discover how this works would simply have been to experiment a bit yourself! Just remember to look at the layouts in the emulator itself (or an actual phone) as the preview in Eclipse is usually wrong.
| 4 | Short explanation... |
I've been trying to get a better understanding of the Tor hidden service protocol. I've read the protocol specification, but I'm having a hard time understanding how it works.
My understanding is that a hidden service is a server that has no fixed IP address, and that clients connect to it by using a rendezvous point. The rendezvous point is a Tor hidden service that is responsible for relaying the client's traffic to the server.
My question is: how does the rendezvous point know which client is requesting the hidden service? I understand that | Up to at least October 2013 the hidden services work like this:
* A hidden service calculates its key pair (private and public key, asymmetric encryption).
* Then the hidden service picks some relays as its introduction points.
* It tells its public key to those introduction points over Tor circuits.
* After that the hidden-service creates a hidden service descriptor, containing its public key and what its introduction points are.
* The hidden service signs the hidden service descriptor with its private key.
* It then uploads the hidden service descriptor to a distributed hash table (DHT).
* Clients learn the .onion address from a hidden service out-of-band. (e.g. public website) (A $hash.onion is a 16 character name derived from the service's public key.)
* After retrieving the .onion address the client connects to the DHT and asks for that $hash.
* If it exists the client learns about the hidden service's public key and its introduction points.
* The client picks a relay at random to build a circuit to it, to tell it a one-time secret. The picked relay acts as rendezvous point.
* The client creates a introduce message, containing the address of the rendezvous point and the one-time secret, before encrypting the message with the hidden service's public key.
* The client sends its message over a Tor circuit to one of the introduction points, demanding it to be forwarded to the hidden service.
* The hidden service decrypts the introduce message with its private key to learn about the rendezvous point and the one-time secret.
* The hidden service creates a rendezvous message, containing the one-time secret and sends it over a circuit to the rendezvous point.
* The rendezvous point tells the client that a connection was established.
* Client and hidden service talk to each other over this rendezvous point. All traffic is end-to-end encrypted and the rendezvous point just relays it back and forth. Note that each of them, client and hidden service, build a circuit to the rendezvous point; at three hops per circuit this makes six hops in total.
| 4 | Short explanation... |
Answer: The relaxin hormone is also responsible for the "pregnancy glow". The hormone stimulates the production of oils in the skin. The increased production of oils causes the skin to be more moist and shiny, giving the appearance of a "glow".
Question: | During pregnancy, the body produces higher levels of the hormone "relaxin". As its name might imply, relaxin helps loosing muscles and ligaments to accomodate the growing fetus and to prepare for giving birth.
The ligaments in the feet loosen as well, causing the bones to strech further apart. This effect is amplified by the added pregnancy weight, causing some women to go up a full shoe size during pregnancy. | 4 | Short explanation... |
Answer:
Question: | They locked me in here yesterday and told me to call a phone number at 8:34 every morning, deliver the numbers, and hang up. No conversation allowed. I imgine they told that to the other guy too.
I called yesterday at 8:34 and gave the numbers.
"Did they lock you up too?" I heard through the receiver. I hung up immediately.
The voice on the other end was a different one today. | 4 | Short explanation... |
Answer: | The Prague Uprising of 1848 (Czech: Pražské červnové povstání), also known as the Pentecostal Storm, was an armed conflict on 12-17 June 1848 in Prague, which culminated in the revolutionary process in the Czech lands. The uprising was a spontaneous unprepared uprising, which was suppressed by the army and killed about 43 people.
##Background
From March 11, 1848 (Assembly in Svatováclavské lázně) there was a political unrest in Prague, by which Prague joined the wider revolutionary current in the whole of Europe. At that time, Czech politics had already split into a liberal current (František Palacký, Karel Havlíček Borovský) and a radically democratic one (Karel Sabina, Josef Václav Frič, Vincenc Vávra Haštalský, Vilém Gauč, Emanuel Arnold). In the first phase, the moderate liberals prevailed. They preferred constructive and cautious steps, such as the establishment of the St. Wenceslas Committee on March 12. On 19 and 31 March, the Committee prepared two petitions to the Emperor, which mainly included the requirements of linguistic equality, the establishment of the National Newspaper (April 5), the transformation of the St. Wenceslas Committee into the National Committee (April 10), Palacký's Writing in Frankfurt (April 11), founding of the Lípa slovanská association (April 30), organization of the Slavic Congress (June 2-12). Meanwhile, the radical wing also strengthened. On June 1, its press body, the Prague Evening Paper, began publishing. It was then supported by the arrival of some delegates to the Slavic Congress (especially Mikhail Bakunin).
At the beginning of June, the commanding general in Bohemia, Alfred Windischgrätz, decided that the growing tensions would be dampened by military demonstrations of force - military patrols were constantly passing through the city, artillery batteries were deployed on Petrin and Vysehrad, a massive military parade was held on June 7, with military reinforcements from Kutná Hora and Hradec Králové. This then increased tensions in the city.
On June 11, Prague students met in Karolinum and sent a deputation to Windischgrätz, demanding that the army ease the situation. They were rejected, after which the students issued them as a leaflet and hung them around Prague (the so-called Red Poster). On the evening of June 11, an assembly met at the St. Wenceslas Spa [cs] in Zderaz [cs] to discuss the situation. It decided to hold a mass demonstration (so-called "fraternal mass") on the second day at the Horse Market (today's Wenceslas Square).
##Uprising
The Mass was attended by the patriotic retired priest Jan Arnold (1785–1872), the brother of the radical democrat Emanuel Arnold. After the Mass, the participants did not disperse and marched through the city in a procession. Around noon, they were stopped by the army in Celetná Street. This ignited a spark of rebellion led by students and radical Democrats (the Liberals stayed away and sought a compromise with Windischgrätz). Many barricades were erected in Prague, where the 12th – 14th century was fought. On the very first day of the uprising, June 12, a stray bullet probably killed Prince Windischgrätz's wife as she stood at a window watching street fights. The students fortified themselves in Karolinum and Klementinum and managed to capture Lev Thun, who came from Malá Strana to see what was happening. The next day, Thun refused to mediate negotiations with the students with Windischgrätz. Thun was eventually released at the urging of Palacký, Šafárik and Borovský.
On the night of June 14-15, Windischgrätz changed tactics, the army withdrew to the left bank of the Vltava and from there began shelling the Old Town, where there were the most barricades, from artillery, to avoid fighting in the streets of Prague. News of the uprising in Prague was well received in the Czech countryside. National guards began to form there, who went to the aid of the Prague insurgents (from Litomyšl, Vysoké Mýto, Kutná Hora, Kolín, Chrudim). They could no longer influence the course of the fighting. On June 17, the insurgents capitulated. About 43 people died during the fighting.
On June 18, a state of siege was declared throughout Prague and rioters began to be arrested. On June 26, the National Committee was dissolved due to the participation of some of its members in the June uprising. On July 20, the siege was lifted and the situation in the Czech lands calmed down. The revolution then took place mainly in Vienna.
##Aftermath
During the uprising, 43 insurgents were killed and 63 were injured. A total of 14 dead and 71 wounded were in Windischgrätz's army.
By suppressing the Pentecostal storm in Prague, the Austrian conservative power tested that a military solution to the political situation was possible, and it was Windischgrätz who was called to Vienna for this task.
After suppressing the uprising, the Liberals focused on enforcing changes in the constituent assemblies (first in Vienna, then in Kroměříž), the radical Democrats attempted a second offensive in 1849 (control of the Lípa slovanská association, preparation of a May Conspiracy in cooperation with Mikhail Bakunin), but on May 10, they were arrested, a state of siege was declared in Prague, and thus the resistance was definitively broken. | 4 | Short explanation... |
<p>
<img src="https://raw.githubusercontent.com/BradyForPresident/website/master/images/DNA.jpg" alt="DNA" style="max-width: 100%;">
</p>
<p>
<img src="https://raw.githubusercontent.com/BradyForPresident/website/master/images/Genes.jpg" alt="Genes" style="max-width: 100%;">
</p>
<p> | Based on a 2015 article from Nature Scientific Reports, many genes are "turned on" when performing a complex musical piece.
These genes are related to muscle control, neural flexibility and growth, and even to the pleasure center in the brain.
Interestingly, variants of about a third of these genes were also previously identified as relating to song production and perception in songbirds. | 4 | Short explanation... |
What is the meaning of the term "overdominant"? | There is the term "overdominant":
From Collins dictionary:
>overdominant [adjective]
excessively dominant
To begin with, the design aspect is the most striking and arguably remains overdominant. [Times, Sunday Times (2010)]
Here is an example:
> [Steps must be taken to prevent any one] religious or ethnic group being overdominant. Otherwise, we will see a repeat of the unfortunate history of much of the 20th Century...
Other possible terms that have similar meaning include "overpowered", "obtrusive" and "preponderant". | 4 | Short explanation... |
Answer:
## Choose lingerie that’s comfortable
1. Choose lingerie that doesn’t cut off circulation. Some lingerie is so tight that it cuts off circulation, especially if it’s a corset or shapewear. Try on your lingerie and move around a bit to make sure that you can breathe and circulation isn’t being cut off.
2. Choose lingerie that doesn’t squeeze. If you have a larger bust or bottom, choose lingerie that doesn’t s | Choosing bridal lingerie is one of the many exciting things you get to do as bride-to-be, and it’s something so personal that only you can do it. For lingerie that you’re planning to wear under your dress on your big day, you’ll need to choose a style that works well under your specific dress. If you’re planning to get other lingerie to change into after the wedding, you have unlimited options with which you can surprise your fiancé!
## Find lingerie for your dress
1. Go with a slip and shapewear if you have a sheath dress. Light flowing fabrics make beautiful wedding gowns but may require a little extra support underneath to avoid showing unwanted bulges or panty lines. Find shapewear that hides any problem areas, and a slip made from similar fabric as your gown in case your gown slips. To reduce the layers you need to wear, try a shaping slip in the same color as your dress.
2. Choose high-waisted shaping lingerie for a mermaid dress. Mermaid dresses show off all your natural curves by hugging your body, so consider lingerie that draws in your waist and doesn’t show panty lines. A high-waisted thong is a good option, on its own or coupled with a bustier.
3. Find a bustier or corset for your ballgown. Many ballgown style dresses already have a structured corset or bustier in them, but if yours doesn’t, find one that matches the color of your dress. Choose a bustier bra that’s seamless and strapless to support and lift your bust while slimming your torso. Panties for your ballgown can be any style you choose, since a ballgown is loose in the skirt area and you won’t be able to see panty lines.
4. Choose any lingerie for A-line dresses. A-line, or princess-style dresses, are fitted at the top and flow out below the bustline. If this is the type of dress you have, you can choose any lingerie based on your comfort or preference instead of shaping or support. Keep in mind the shape of the top of your dress when choosing a bra; if the dress has a deep neckline or is strapless, you’ll want to find a strapless bra or skip a bra altogether.
5. Find a backless bra with adhesive sides for a backless dress. If you have a halter or other type of backless dress, you may want support or coverage from your lingerie. Choose an adhesive bra that matches the color of your dress to get the support you need. Adhesive bras also work great for strapless dresses if you can’t find a strapless bra that you like.
6. Match the lingerie color to your dress. Try bringing a swatch of the fabric that your gown is made from with you when you shop for lingerie. Some bridal gown retailers offer a swatch so you can match accessories with your gown. If you don’t have a sample of the fabric, try ordering more than one shade of lingerie and keep the one that best matches your gown. Matching your lingerie with your dress instead of your skin tone is helpful in case your gown slips a bit. Your lingerie won’t be as obvious if the shade matches your dress.
## Choose wed night lingerie
1. Wear whatever you’ll feel sexy in. There are certain myths surrounding wedding night lingerie that it has to look a certain way, but only you and your fiancé know what you like. This means if you don’t want to wear white, don’t! You can wear anything from boyfriend-style pajamas to French maid costumes, so don’t be afraid to choose something unique to you.
2. Choose flowery white lace for the classic feminine look. If you want to go a traditional route, find a comfortable white or cream bra and panty set made from sheer flowery lace. Or go with a short white lacy gown. Some lingerie combines lace and faux-fur for an extra feminine touch.
3. Try an artsy corset with suspenders, stockings, and heels for a bolder approach. If bold is more your style, think straps! Look for a detailed, beaded or embroidered corset with suspenders, fishnet or lace thigh-highs, and a pair of matching heels. Choose any color theme you like for this lingerie based on your preference. Some corsets have a connected underwear component with suspenders; others don’t, in which case, you can find a matching thong to complete your outfit.
4. Choose a lacy jumpsuit or teddie if you like one-pieces. Find a lacy halter mini-shorts jumpsuit to combine sporty and feminine looks. Or go bold and feminine with a sheer or strappy teddie in any color that you like. To stay on the more traditional side, choose white or cream for your one-piece lingerie. Or choose a pastel pink or blue for a romantic, feminine effect. Black or red also work well with these pieces if you want a bolder look.
5. Get a sheer dressing gown for some added luxury. Regardless of what style lingerie you get, consider a sheer dressing gown to drape over it, as an extra piece to remove on your wedding night, for lounging around in the morning, or both.
6. Consider a separate registry just for lingerie if you’re having trouble deciding. If you like too many pieces to choose, let a few close friends and your fiancé choose for you! Create a registry online with a lingerie store, add some of your favorite pieces, and give your bridesmaids and fiancé the link before your bridal shower. This gives the people who know you best a chance to help you decide. You may end up with more than one item, but that’s okay. Choose one for your wedding night and save the rest for your honeymoon!
## Consider your body type
1. Choose strappy lingerie on a muscular frame. You can probably pull off some pretty daring looks if you’re in good shape. Choose lingerie with lots of straps, bold colors, or a cinched waistline to show it off.
2. Try a plunging neckline and briefs if you’re pear-shaped. Pear-shaped women are smaller up top with wider hips, butt, and thighs. Show off this type of figure with pieces that go low at the neckline and brief-style underwear. Or experiment with colors by wearing bold, bright patterns up top.
3. Go with v-cut panties and a full coverage bra or corset if you’re apple-shaped. Apple-shaped ladies carry more weight in the top half of their bodies and have slender legs. Show off this type of body by providing full bust coverage and concealing your stomach area, if you want to. Think lots of lace up top and brightly colored panties.
4. Try a garter belt or any waist-cincher for an hourglass figure. Hourglass figures have a proportioned build with bust and thigh measurements that are about equal, and are slimmer at the waist. Show off your waistline with a flattering belt or any accessory that draws attention to it.
5. Go wireless for a small bust. If you don’t need an underwire bra on your wedding day, don’t bother with one. Try a feminine lacy bralette or a racerback style bra if you have a small chest. You can likely find some cute halter one-pieces as well.
6. Choose high-waisted bottoms for a long torso. If you have a long torso and shorter legs, you can choose from the variety of high-waisted styles that are so popular. Try a lacy crop top set with high-waisted bottoms to draw more attention to your shoulders and legs.
| 4 | Short explanation... |
Answer:
There's nothing wrong with a few empty rooms. In fact, they're probably the most common type of room you'll encounter in a dungeon.
## The dungeon's inhabitants
Think of each room as a character in a dungeon. They have their own personalities, motivations, and goals. The dungeon's inhabitants may be orcs, goblins, ghouls, zombies, or any number of other creatures. They may also be objects, such as traps, secret doors, or hidden pass | By definition, nothing's going to happen in an empty room (though see below). There are no hidden doors to find, no puzzles to solve, no enemies to fight. So what's their purpose?
## Bringing the dungeon to life
While all the orcs may sit around in a guard room waiting for PCs to show up, where do they sleep, what do they eat, what happens to their trash? Think of a dungeon not just as a place to have fights in, but as an actual place that serves a purpose. Once you do, the dungeon will start making sense. "Empty" rooms will increase immersion for the players, and force you to consider things you may not have otherwise. Should there be a pet otyugh that eats the trash? Are the orcs demanding cows from the local farmers for "protection"? Do they keep a famed halfling cook enslaved, to make them rare steaks?
## Foreshadowing
Once the dungeon makes sense, you can use that to place clues for things that dwell deeper within. Has a horde of zombies marched through to guard the necromancer's abode within, and left a few rotten body parts here and there? Has a malevolent force been summoned and spoiled all the meat and milk in the dungeon? Is there a golem maintenance station, with oil to grease them, rags to polish them, and a mad goblin mechanic? These may be vital clues PCs need to prepare for a tough fight, or they can simply let them form theories and feel smart about being right once they do come upon a golem or three.
#Currently empty
These rooms are empty now, but they don't have to stay that way. PCs may choose to fortify a room and bring the enemy to them - such tactical choices could be an important part of dungeoncrawling. Orcs may chase PCs through the dungeon, or randomly come across them in a kitchen because they were feeling peckish.
Note that some of these ideas would introduce creatures or things into rooms that PCs may choose to interact with, which would make them non-empty. In a way that's fine: you started with an empty room but found something interesting to put inside after all. If that's not your intention, well, don't put goblins or halflings or otyughs in. Stick to body parts and greasy pots and shadowy portraits and bloodstains and scent of brimstone and fresh flowers and broken mirrors and...
Tell a story with your empty rooms, or offer tactical choices. Preferably both. | 4 | Short explanation... |
 | Staphylococcus bacteria are commonly found on human skin and many surfaces. When the bacteria stays on your skin, it's generally fine; however, if the bacteria enters the skin through a cut, scrape, or bug bite, it can cause problems. It can create an infected wound, and if left untreated, can become life-threatening.[1]
X
Trustworthy Source
Mayo Clinic
Educational website from one of the world's leading hospitals
Go to source
Seeing your doctor for treatment is a must if you think you have a staph infection.
## Get treatment
1. Look for signs of infection. A staph infection can show redness and swelling. It can also create pus. In fact, it can look much like a spider bite. The skin may also feel warm. These symptoms will generally be near where you have a cut or sore. There may also be pus or discharge draining from the wound.
2. Seek professional medical attention as soon as possible. Staph infections can develop into a serious infection quickly. Therefore, if you think you have one, you should call your doctor. Your doctor will likely want you to come in as soon as possible, and she will give you instructions for the immediate future. If you have signs of infection as well as a fever, it is especially important you see your doctor. Your doctor may wish to see you immediately or send you to the emergency room for treatment.
3. Clean the area with an antibiotic soap. In warm water, gently wash the area with soap. You can use a washcloth if you do so gently, but you shouldn't use that washcloth again before washing it. Don't try to pop the wound if it's a blister; that will only spread infection. If your wound needs to be drained, it should be done a by doctor. Make sure to wash your hands after cleaning the area. When you dry the wound, use a clean towel. Don't reuse it without washing it.
4. Discuss whether your doctor will take a sample. Generally, your doctor will want to analyze a sample of tissue or a culture. The idea is he can check what strain of the infection you have; once identified, he will know which antibiotic that particular microbe is susceptible to.
5. Expect your doctor to drain it. If you have a bad infection that creates an abscess or boil, your doctor will likely drain the pus from wound. You shouldn't feel much, as she will try to numb the area first. Draining a wound generally involves the doctor using a scalpel to make a small incision across it. After that, she'll let fluid drain out. If the wound is large, she may pack it with gauze that will need to be removed at a later time.
6. Ask about antibiotics. Most of the time with staph infection, you will need to take a round of antibiotics. One reason staph is so dangerous is because some strains are becoming resistant to certain types of antibiotics. This includes Methicillin-resistant Staphylococcus aureus (MRSA), which must be treated with IV antibiotics. Typically, you'd take cephalosporins, nafcillin, or sulfa drugs; however, you may need to take vancomycin instead, which is less resistant. The downside to this drug is your doctor must give it to you intravenously. A side effect of vancomycin may be the development of a severe, itch rash. It usually covers the neck, face, and upper torso. You cannot simply look at an infection and know that it is a staph or MRSA
7. Understand when surgery is necessary. Sometimes, staph infections can develop around a medical device implanted in your body or a prosthetic. If that happens, you may need surgery to have the device removed.
8. Watch for this complication with other injuries. Staph infections can be a problem in a number of situations, such as when you have surgery. You can also develop a serious condition called septic arthritis when staph bacteria enter a joint, which can happen sometimes when staph is in the bloodstream. If you have septic arthritis, you'll have trouble using that joint; you'll also likely notice quite a bit of pain, as well as some swelling and redness. You should see a doctor as soon as possible if you have these symptoms.
## Prevent staph infections
1. Wash your hands often. Staph gathers on the skin, including under your nails. By washing your hands, you are more likely to avoid introducing it to a scratch, scrape, or scab. When you wash your hands, you should scrub for 20 to 30 seconds with soap and warm water; using a throwaway towel afterwards is best. In addition, turn off the faucet with a towel so you don't touch the germy surface after washing your hands.
2. Clean and cover cuts. When you get a cut or scrape, it's important to cover it with a bandage once you clean it up. Using an antibiotic ointment is also good practice. Doing so will help keep staph infection out of the wound.
3. Wear gloves if you need to play doctor. If you're working on someone else's cut or wound, it's best to put on clean gloves if possible. If not, make sure to wash your hands thoroughly afterwards and try not to touch the wound itself with your bare hands. You can do things like put the antibiotic ointment on the bandage before placing it over the wound to keep from touching it.
4. Shower after you exercise. You can pick up staph infection in the gym, hot tub, or steam room, so make sure to shower after you exercise to help wash it off. Always make sure the shower area is clean, and don't share shower supplies, such as razors, towels, and soap.
5. Change tampons frequently. Toxic shock syndrome is a form of staph infection, and it is often caused by leaving a tampon in for longer than eight hours. Try to change your tampon every four to eight hours, and use the lightest tampon you can get away with. If you use a tampon that is too absorbent, it can increase your risk of a staph infection. If you're worried about toxic shock syndrome, try sticking to other methods to manage your period, such as pads.
6. Increase the temperature. When doing your laundry, wash your linens, including your towels and sheets, in hot water. Hot water can help kill off the staph bacteria so it doesn't keep infecting you.
| 4 | Short explanation... |
```
Function FuzzyStringMatching(ByRef S1$, ByRef S2$) As Long
Dim phraseWeight As Long, wordsWeight As Long, lengthWeight As Long
Dim phraseValue# As Double, wordsValue# As Double
Dim phraseMin# As Double, wordsMin# As Double
Dim phraseMax# As Double, wordsMax# As Double
Dim phrase# As String, words# As String
Dim phraseS1$, phraseS2$, wordsS1$, wordsS2$
Dim phraseValue#$, wordsValue#$, phraseMin | Fuzzy String Matching is the process of performing a human-like estimation of the similarity of two words or phrases. In many cases, it involves implementing the Levenshtein distance algorithm, which determines how many changes must be made to a string or phrase to turn it into another string or phrase. The following implementation in VBA involves a weighted comparison of the length of the two phrases, the number of changes between each phrase, and whether each word could be found in the target entry.
```
'Calculate the Levenshtein Distance between two strings (the number of insertions,
'deletions, and substitutions needed to transform the first string into the second)
Public Function LevenshteinDistance(ByRef S1 As String, ByVal S2 As String) As Long
Dim L1 As Long, L2 As Long, D() As Long 'Length of input strings and distance matrix
Dim i As Long, j As Long, cost As Long 'loop counters and cost of substitution for current letter
Dim cI As Long, cD As Long, cS As Long 'cost of next Insertion, Deletion and Substitution
L1 = Len(S1): L2 = Len(S2)
ReDim D(0 To L1, 0 To L2)
For i = 0 To L1: D(i, 0) = i: Next i
For j = 0 To L2: D(0, j) = j: Next j
For j = 1 To L2
For i = 1 To L1
cost = Abs(StrComp(Mid$(S1, i, 1), Mid$(S2, j, 1), vbTextCompare))
cI = D(i - 1, j) + 1
cD = D(i, j - 1) + 1
cS = D(i - 1, j - 1) + cost
If cI <= cD Then 'Insertion or Substitution
If cI <= cS Then D(i, j) = cI Else D(i, j) = cS
Else 'Deletion or Substitution
If cD <= cS Then D(i, j) = cD Else D(i, j) = cS
End If
Next i
Next j
LevenshteinDistance = D(L1, L2)
End Function
```
We can creat two separate metrics for evaluating the similarity of two strings. One is "valuePhrase" and the other is "valueWords". valuePhrase is just the Levenshtein distance between the two phrases, and valueWords splits the string into individual words, based on delimiters such as spaces, dashes, and anything else you'd like, and compares each word to each other word, summing up the shortest Levenshtein distance connecting any two words. Essentially, it measures whether the information in one 'phrase' is really contained in another, just as a word-wise permutation.
valueWords, valuePhrase, and Split function:
```
Public Function valuePhrase#(ByRef S1$, ByRef S2$)
valuePhrase = LevenshteinDistance(S1, S2)
End Function
Public Function valueWords#(ByRef S1$, ByRef S2$)
Dim wordsS1$(), wordsS2$()
wordsS1 = SplitMultiDelims(S1, " _-")
wordsS2 = SplitMultiDelims(S2, " _-")
Dim word1%, word2%, thisD#, wordbest#
Dim wordsTotal#
For word1 = LBound(wordsS1) To UBound(wordsS1)
wordbest = Len(S2)
For word2 = LBound(wordsS2) To UBound(wordsS2)
thisD = LevenshteinDistance(wordsS1(word1), wordsS2(word2))
If thisD < wordbest Then wordbest = thisD
If thisD = 0 Then GoTo foundbest
Next word2
foundbest:
wordsTotal = wordsTotal + wordbest
Next word1
valueWords = wordsTotal
End Function
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
' SplitMultiDelims
' This function splits Text into an array of substrings, each substring
' delimited by any character in DelimChars. Only a single character
' may be a delimiter between two substrings, but DelimChars may
' contain any number of delimiter characters. It returns a single element
' array containing all of text if DelimChars is empty, or a 1 or greater
' element array if the Text is successfully split into substrings.
' If IgnoreConsecutiveDelimiters is true, empty array elements will not occur.
' If Limit greater than 0, the function will only split Text into 'Limit'
' array elements or less. The last element will contain the rest of Text.
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Function SplitMultiDelims(ByRef Text As String, ByRef DelimChars As String, _
Optional ByVal IgnoreConsecutiveDelimiters As Boolean = False, _
Optional ByVal Limit As Long = -1) As String()
Dim ElemStart As Long, N As Long, M As Long, Elements As Long
Dim lDelims As Long, lText As Long
Dim Arr() As String
lText = Len(Text)
lDelims = Len(DelimChars)
If lDelims = 0 Or lText = 0 Or Limit = 1 Then
ReDim Arr(0 To 0)
Arr(0) = Text
SplitMultiDelims = Arr
Exit Function
End If
ReDim Arr(0 To IIf(Limit = -1, lText - 1, Limit))
Elements = 0: ElemStart = 1
For N = 1 To lText
If InStr(DelimChars, Mid(Text, N, 1)) Then
Arr(Elements) = Mid(Text, ElemStart, N - ElemStart)
If IgnoreConsecutiveDelimiters Then
If Len(Arr(Elements)) > 0 Then Elements = Elements + 1
Else
Elements = Elements + 1
End If
ElemStart = N + 1
If Elements + 1 = Limit Then Exit For
End If
Next N
'Get the last token terminated by the end of the string into the array
If ElemStart <= lText Then Arr(Elements) = Mid(Text, ElemStart)
'Since the end of string counts as the terminating delimiter, if the last character
'was also a delimiter, we treat the two as consecutive, and so ignore the last elemnent
If IgnoreConsecutiveDelimiters Then If Len(Arr(Elements)) = 0 Then Elements = Elements - 1
ReDim Preserve Arr(0 To Elements) 'Chop off unused array elements
SplitMultiDelims = Arr
End Function
```
Using these two metrics, and a third which simply computes the distance between two strings, we have a series of variables which we can run an optimization algorithm to achieve the greatest number of matches. Fuzzy string matching is, itself, a fuzzy science, and so by creating linearly independent metrics for measuring string similarity, and having a known set of strings we wish to match to each other, we can find the parameters that, for our specific styles of strings, give the best fuzzy match results.
To allow the optimization of fuzzy matching, we can weight each metric. The formula that defines the final score is a simply combination of the metrics and their weights:
```
value = Min(phraseWeight*phraseValue, wordsWeight*wordsValue)*minWeight
+ Max(phraseWeight*phraseValue, wordsWeight*wordsValue)*maxWeight
+ lengthWeight*lengthValue
```
For your specific context, you have to come up with a set of weights for any metrics you come up with to determine similarity. With the appropriate set of heuristics and weights, you'll have your comparison program quickly making the decisions that you would have made. | 4 | Short explanation... |
What is a Mormon service like? | Mormon services are a bit different, as you discovered. In the United States, there is generally a block of 3 meetings back-to-back including a sunday school, a mens' and women's time for instruction, and a sacrament meeting where the general congregation meets together. It sounds like the first meeting you attended was Priesthood meeting where the brothers study the words of scripture and modern Church leaders. Those classes usually have a single instructor each week.
Sacrament meeting is where any equivalence of a sermon would be heard. The primary difference between Mormon services and some others is the focal event of church meetings. The purpose behind holding a sacrament meeting is to take the sacrament and renew covenants made at baptism. The actual administration of the sacrament is the most sacred public meeting to Mormons. Hearing people speak and even interpersonal communion (socializing) is only secondary, though important.
Members of a ward, or local congregation, are invited to speak by the bishop or his counselors (the basic equivalent of a pastor) and will have some time to prepare a talk. Talks should draw from the scriptures, personal experience and testimony, and focus on the Savior. Note that comments made by church members over the pulpit at a sacrament meeting do not necessarily reflect the Church's official position on a topic or even Church doctrine.
The talks are meant to urge, inspire, and exhort all in attendance to come to Christ, to give them an opportunity to feel the power of the Spirit, and to strengthen their faith. Often, members will come with questions in their hearts and find answers in the words that day.
Counsel from leaders like a bishop sometimes occur over the pulpit, but usually this is private and individual, based on personal circumstances. The bishop and his counselors are supposed to meet with members regularly in interviews. There is no paid clergy, so all the service is volunteer.
Each member is also assigned two "home teachers" which visit their family once a month to share a gospel message, check on well-being, and be a friend and support especially when needed. In this way, instruction is given which might also help replace a typical sermon pattern. The bishop, his counselors, and others he calls on help organize these efforts. (It has also proven to be very quick and effective during disaster response, as home teachers immediately report in on who they teach, and bishops coordinate an effort if needed.
So what you saw was apparently quite normal. Even once a month (the first Sunday), a fast and testimony meeting is held during sacrament meeting, where members forgo preparing talks and instead bear their testimonies about Christ and the gospel for the hour as they feel a desire to do so. Instruction is very member-to-member, you might say, but is guided by the direction of a bishop and other church leaders who also inspire and instruct. | 4 | Short explanation... |
Answer: A lantern shone atop a pole
Through shielded panes of glass
And brightly burned against a swollen
Cloak of smothering mass
Below it swirled, that blackened sheet
And sometimes it would climb
Along the stalk, then slip, retreat
Like now was not the time.
For all his life the flame stayed home
Atop his iron perch
Refusing calls to leave, to roam
And risk the monster's lurch
Until, one | A lantern shone atop a pole
Through shielded panes of glass
And brightly burned against a swollen
Cloak of smothering mass
Below it swirled, that blackened sheet
And sometimes it would climb
Along the stalk, then slip, retreat
Like now was not the time.
For all his life the flame stayed home
Atop his iron perch
Refusing calls to leave, to roam
And risk the monster's lurch
Until, one day, when wear and age
Had rendered all to rust
That cool and clear protective cage
Collapsed, returned to dust.
It's then the lantern knew at last
The end he could not halt
He blazed defiant, holding fast
And braced for the assault
But though in youth with verve and force
He swore to give a fight
His wick had run its proper course
And caved to endless night. | 4 | Short explanation... |
Answer:
Question: | Here are some suggestions to improve your public speaking skills.
The first thing you must do is to accept that it's normal to be nervous. Even the most seasoned public speakers still get nervous before giving a big presentation. The difference is that they have learned to control their nervousness and even use it to their advantage.
Second, you need to realize that people aren't actually out to judge and criticize you. They actually want you to be good. They want to be entertained, informed, enlightened - whatever the goal of your speech is, they want you to achieve it. When you give a speech, you and the audience have the same goal - for you to be good. So don't think that people are out to get you.
Third, what you must do is to practice, practice, practice. There is no substitute for this. When you first start out, you'll be nervous even when giving a speech in front of just one other person. That's fine. Just keep practicing and you'll get better.
Last, you need to learn the art of storytelling. This is a powerful technique that will help you engage your audience and keep them interested in what you have to say. Stories are powerful because everyone likes to hear stories. Even if your speech has nothing to do with stories, you can still use storytelling techniques to make it more interesting. For example, you can start your speech by telling a brief story about something relevant to your speech. Or you can use stories as illustrations or examples when explaining points in your speech. | 4 | Short explanation... |
I cannot provide ways of hurting yourself or others because it is dangerous and could lead to serious consequences. If you are in emotional distress, I encourage you to turn to trusted friends, therapists, and professionals for help. | 4 | Short explanation... |
|
Answer:
You can't. They don't have a rim. A rim is a circular band that goes around the outside of a wheel. The spokes attach to the rim. A wheel is a set of spokes and a rim. A bike wheel is just a wheel, and it has no rim. A wheel has a tire, and the tire has tread. The tire is mounted on the rim. The tire is mounted on the rim by the bead, which is a flexible rubber strip. The bead | The tread on a road bike's tires is really quite unimportant and purely cosmetic. Road bike tires have tread patterns because they sell better, not because they perform better.
Here's some questions to ask to decide about replacing a tire:
* Can you see any of the fabric?
* Are you getting flats more easily than you used to?
* Is any part of the tire bulging out or lumpy?
* Are there visible holes/gashes in the tire?
* Does the wear indicator indicate you should replace? (Some tires have dimples or grooves that are there to indicate when the tire should be replaced. Some have an alternate color of rubber underneath, and when that shows through the tire should be replaced)
Smooth tread is actually ideal for road conditions, but not commonly found on tires. If you're on hard surfaces such as pavement/asphalt, the tread doesn't help you and actually slightly reduces contact area and increases rolling resistance. On most road tires the minimal tread pattern is just cosmetic to make their customers feel better (since a smooth tire looks slippery).
See also: Sheldon Brown's comments on tire replacement and tread patterns
If you plan to ride through mud, sand or other soft surfaces, you need tread. So when you no longer have tread on your mountain bike or cyclocross bike's tires, it's time to replace them (unless you plan to only use them on the road). | 4 | Short explanation... |
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question: | It is important to understand that there is no "one size fits all" answer to your question. Every relationship is different, and there is no single way to define a "healthy" relationship.
That said, there are some general guidelines that you can use. One of the most important things to remember is that a healthy relationship is based on mutual respect. In a healthy relationship, you should feel comfortable being yourself, and you should feel that your partner respects and values you as a person.
Another important aspect of a healthy relationship is honesty. In a healthy relationship, you should feel comfortable being open and honest with your partner. Your partner should feel the same way towards you. If you find that you are lying to your partner or that your partner is lying to you, that is a sign that the relationship is not healthy.
In addition, equality is also an important aspect of a healthy relationship. In a healthy relationship, neither partner should feel that they are "superior" to the other, and neither should feel like they are "inferior". The relationship should be equal in every way.
Finally, it is important to remember that a healthy relationship takes work. You shouldn't expect a healthy relationship to be perfect. You will have arguments and disagreements just like any other couple, but how you deal with those disagreements is what makes the relationship healthy.
In conclusion, the best way to know if your relationship is healthy is to ask yourself if you feel comfortable being yourself around your partner, if you feel like your partner respects you, if you feel like your partner is honest with you, if you feel like your partner is equal to you, and if you feel like you can talk to your partner about anything. If you can answer yes to all of those questions, then your relationship is probably healthy. | 4 | Short explanation... |
### 13. What is the most popular way to eat a burrito? | The rainbow kittens cheerfully play in the field of sprinkled cupcakes and other various desserts. Oh, and there's tits too. | 4 | Short explanation... |
Q: What is a white elephant?
A: A white elephant is an object that is useless, expensive, and difficult to sell or dispose of, like a gift that a recipient does not want or need and cannot responsibly give away.
The term originated in the 19th century, when gifts of white elephants were made in Southeast Asia.
The term was popularized by the 1949 novel The Razor's Edge by W. Somerset Maugham, which featured a character who | In fact, the English expression for a burdensome gift is literally white elephant:
> a thing that is useless and no longer needed, although it may have cost a lot of money [OALD]
So-called white elephants, or albino elephants, are found in many parts of South and Southeast Asia. In Buddhist countries they may be venerated as Queen Maya, mother of the Buddha, was said to have been visited in a dream by a white elephant holding a white lotus flower, and Siddharth Gautama entered his mother's womb in the form a white elephant. The white elephant is also associated with traits like mental strength and purity.
It became a royal symbol in Siam (Thailand); the king continues to keep white elephants. The story emerged that if a courtier displeased him, the king would make him a gift of a white elephant. The courtier could hardly decline a royal gift, and could hardly afford not to maintain a sacred animal, and could not put it to productive use, and so would be ruined by the cost of upkeep.
The earliest example of its use is from a 1721 essay in London Journal:
In short, Honour and Victory are generally no more than white Elephants; and for white Elephants the most destructive Wars have been often made.
A 2011 paper by Ross Bullen entitled “This Alarming Generosity”: White Elephants and the Logic of the Gift, in American Literature, covers the popularization of the term in the mid-19th century, presents an alternative account, that the story is a piece of orientalism and the white elephant rose as a literary trope. | 4 | Short explanation... |
How does electrophoresis work? | ## View your sample
1. Hold a UV light up to the gel sheet to reveal results. With your gel sheet in front of you, find the switch on a tube of UV light to turn it on. Hold the UV light 8–16 inches (20–41 cm) away from the gel sheet. illuminate the DNA samples with the UV light to activate the gel and read the results. If the test was performed properly, your sheet should have 2-8 sets of vertical stripes in parallel rows.Warning: Wear gloves and protective eyewear when physically handling a gel sample. Touching the gel can interfere with your results and some of the gels are harmful if they get in your eyes. Place the gel sheet on a piece of wax paper if you’re removing it from the machine. The individual stripes indicate specific strands of DNA. The strips should have varying levels of thickness. If you’re reading results that have been printed on a sheet of paper, you can skip this step.
2. Find the wells by looking for the biggest pools of color. To properly orient yourself, you need to find the original location of the samples, called the wells. With your sheet in front of you, look for the end of the sheet with a big pool of colored gel. The wells are the locations where the gel samples are loaded into the sheet and indicate the start of the sample.There should be one well for each of your samples. If one of the wells is lacking color, the sample may have been applied poorly. The wells indicate the negative end of the sheet. The opposite side of the sheet is the positive end. When each sample is applied to the sheet, the negatively-charged DNA travels across the sheet to the opposite side, leaving individual samples of DNA behind as it moves.
3. Classify each strip by noting the origin of the samples. If you’ve been given a key, understand that each horizontal row depicts a unique set of DNA. Use your key to determine what each row represents. The number of samples can be determined by counting the number of rows. If you haven’t been given a key, you cannot determine the source of each sample. Electrophoresis only provides you with information about a DNA sample’s behavior, but it doesn’t reveal the source of a sample on its own.If you performed the test yourself, write down where each row’s sample is from while you’re applying the gel.
4. Identify the DNA ladder to establish a scale for the DNA. Depending on whether or not a DNA ladder was included in the test, you may have one strip designed to provide you with a scale to make comparisons easier. This scale is called the DNA ladder. The DNA ladder will contain strips of DNA of known sizes to make it easier to figure out how big or small the other strips are.Actual DNA samples will have a lot of variation in the sequence of the strips. There may be a few thin strips, followed by 1–2 inches (2.5–5.1 cm) of empty space, followed by thick strips, and ending in more thin strips. The DNA ladder will make it easier to figure out how big the individual strips actually are by giving you something to compare them to. The DNA ladder is almost always placed in the last row at the top or bottom of your sheet.
## Assess the size of the sample
1. Identify thinner strips to find the faster DNA molecules. When each sample is applied, it starts moving to the positive end of the sheet on the right. The smaller the molecules are, the faster they move since they experience less resistance. A smaller and faster DNA sample leaves thinner strips behind as it moves. When looking at your results, determine which DNA samples are smaller and faster by looking for the thinnest strips.
2. Find the thicker strips to find the slower DNA. Samples with larger molecules naturally move slower through the gel. As a result, you can find the bigger or slower molecules by looking for the biggest strips on your page. Looking at the frequency of the bigger and smaller strips as they appear in a single row you a good picture of the sample’s DNA fingerprint.The way individual strips are arranged in a sequence is unique to each genetic sample. The combination of thin and thick strips creates a specific picture of someone’s genetic makeup. DNA isn’t stronger or better if it leaves thicker bands behind. These strips are simply identifying markers that you can use to compare a variety of samples.
3. Use the DNA ladder to determine the size of each strip. The DNA ladder is used to give you a scale to compare the individual strips to. The size of the strips in a DNA ladder depend upon the type of ladder that was used for the test, but it will typically be either 10-100 bp (base pairs), or 500-1000 bp. The thickest strip is the highest size in a spectrum and the smallest size is the lowest. So for a 10-100 bp ladder, the thickest strip is 100 bp, and the thinnest strip is 10 bp.Tip: The range of a DNA ladder is printed on the bottle that the ladder came in. It may also be listed on the key if you were given one. There is no way to determine the range of a ladder based on the strip alone, since different gels will allow samples to travel at different speeds. 1000 bp is the same as 1 kb. Kb is short for kilobase, and the ladder may use this unit instead of bp. The smaller the scale is, the more accurate the comparisons will be. Base pairs and kilobases are simply units of measurement. They refer to the physical size of a DNA molecule.
## Make conclusions
1. Look for strips that appear at the same point on the sheet to find similarities. When looking at the sheet holistically, look for points where 2 or more strips appear in identical locations on different rows. This is an indicator that the DNA samples are somehow related. If there are 2 or more rows without any overlap in the sequence, they are entirely unrelated. The more related 2 samples are, the more overlap there will be in their sequences.In other words, if you’re looking at the sheet with the wells on the left, you’re looking for vertical columns where 2 strips appear at the same time. For example, a mother and her child will have half of their strips overlapping. A child and their second cousins though may only have 2-3 strips that overlap.
2. Identify identical samples by finding strips with the same configuration. If 2 or more samples have a nearly identical sequence of strips, they’re the same DNA. This doesn’t necessarily mean that the source of the sample is the same—identical twins, for example, will have the same DNA sequence on an electrophoresis sheet. Identical strips are usually required to reasonably tie a suspect to a crime scene.Tip: Electrophoresis is often used by forensics teams to rule out suspects in criminal cases. It is also used to test maternity or paternity.
3. Understand the limitations of electrophoresis testing. Electrophoresis testing is helpful when it comes to comparing DNA samples, but it can be hard to make definitive conclusions sometimes. The scale can only get so magnified, and smearing can make bands hard to interpret. In some instances, you won’t be able to conclusively say that 2 samples are related.More than 2 overlapping bands indicates a strong similarity between 2 samples. When assessing results, scientists will often say that there is a “high probability” that 2 samples are related if less than half of the bands in 2 samples overlap.
| 4 | Short explanation... |
## How do I know if my dog is grieving? | ## Comfort the dog
1. Spend extra time with the dog. A dog in mourning may need extra love and attention. Try to increase the amount of time you spend with the dog. You might spend twenty extra minutes in the morning and evening to help give the dog support while they are grieving the death of their owner. During this time, you can:
* Talk to the dog
* Walk the dog
*
* Groom the dog
*
* Go on a car ride
* Visit the dog park
* Pick out a new toy together at the pet store
* Cuddle the dog on the couch or in bed
* Take the dog for a run, if the dog is healthy enough
* Play a game, like fetch or tug-of-war
2. Pet the dog. Touch increases the bond between dogs and people. Extra cuddling, petting, and brushing can improve the dog’s mood and distract them from the loss of their owner. As you spend time with the dog, rub their belly or scratch their ears. Give them a little extra grooming time each week. This will help you bond and comfort the dog.
3. Play their favorite games. Playtime can distract the dog from the loss of their owner. The extra exercise can also boost their mood and decrease the likelihood of grief-related health issues. Try to identify the dog’s favorite games or toys, and spend extra time playing with them. Some older dogs may not want to play as much. Each dog is different. If the dog is uninterested in playing, you might try another way of distracting them. You can also give the dog new and interesting toys. Food puzzle toys can help keep the dog busy while you are not home, reducing the dog’s separation anxiety.
4. Invite company over. The dog may appreciate having people over to spend time with. Invite a few friends over, and see how the dog reacts. If the dog enjoys the company and socializes with the people, you may want to keep it up. If the dog avoids your guests, you should respect their space. Inviting people or dogs that the dog already knows may cheer the dog up. It can also introduce an element of familiarity in their new life. If the people are total strangers to the dog, invite one or two over at a time to see how well the dog handles it.
## Monitor the dog’s health
1. Identify physical symptoms of mourning. Dogs mourn differently from humans. While some dogs may not mourn at all, others will become extremely clingy, anxious, or lethargic. Keep an eye out for the following symptoms. If they do not disappear after a few days, you might consider seeking help from a vet or dog behaviorist. Lethargy or lack of energy. Lack of interest in playing
* Loss of appetite
*
* Unsociable behavior
* Increased sleeping
*
* Weight loss
* Decline in physical health
2. Encourage the dog to eat. It is very common for older dogs to stop eating after the loss of their owner. This can cause other health issues to develop. If the dog seems to have stopped eating, you should try to get the dog to eat. If possible, keep feeding the dog the same food that the old owner fed them. You can also give the dog kibble in a kong-type dog toy or food puzzle. The dog may enjoy trying to get the food out of the toy. Add a little warm chicken broth to the dog’s dry food to make it softer and more enticing. While a few extra treats here and there may not be detrimental to your dog, you should avoid giving the dog too many treats during this period. They may learn that they will be rewarded for whining, and they may not eat their normal food.
3. Take the dog on walks. Older dogs may not be extremely active to begin with, but they may become more lethargic after the loss of their owner. Such inactivity can lead to further health problems. If the dog is able, take them on a walk at least once or twice a day. Depending on the age and health of the dog, these may be short walks. You can make even short walks more mentally stimulating for the dog by walking in areas with lots of interesting sights, sounds, and smells. For example, you might take your dog to the park, through the woods, or some place with water.
4. Take the dog to the vet. If the dog continues to mourn for several weeks or if the dog is not eating, you should visit the vet to make sure that the dog is still in good health. The vet can diagnose an underlying medical problem or prescribe medication to help with the dog's anxiety or depression. While at the vet, you might ask:
* "What medical issues does this dog have? Can any of them be aggravated by the loss of their owner?" "The dog seems really depressed. What can I do to help?" "The dog has been sleeping a lot since I took them in. Is this because the dog is depressed or is there another issue?" "The dog has not been eating since their owner died. What can I do to encourage them to eat?" If you know which vet the dog's old owner used, you should take them there. The vet can inform you of the dog's medical history.
## Provide a happy home
1. Maintain a routine. For the first few days after the owner has died, it is important to maintain the dog’s routine as much as possible. Older dogs tend not to do well with new habits, schedules, or activities, and the owner’s death may have already disrupted their life. Try to feed and walk the dog at the same times as the old owner did. If you can, reach out to people who knew the dog when it was with the old owner, and see if they have an idea of what the dog’s former routine was like. If you do not know what schedule the old owner kept, you can develop a new schedule for the dog. Keep a consistent routine for the first few weeks that the dog joins you. The dog may also prompt you when they expect to be fed or taken outside. If there has been upheaval in the dog’s life since the owner died (for example, if the dog has been passed around by family members or if you adopted the dog from a shelter), setting a routine will be even more important for the dog. Make sure that you stick to the schedule to help the dog ease into their new home life. Be careful not to let the dog fall into bad habits due to grief. For example, if the dog turns up its nose at food, just let the food sit there until the dog is ready to eat it. Don’t “reward” the behavior by making a fuss.
2. Take care of your own grief. If you knew the old owner, you may be grieving yourself. This is understandable. Do what you have to so that you can grieve in your own, personal way. This will in turn help the dog by providing a loving, happy home for them. Avoid mourning in front of the dog. Dogs are very sensitive to grief, and they may exhibit signs of mourning if they understand that you are grieving. While it is okay to cry a little in front of the dog, you may want to step into another room to mourn privately.
3. Reinforce positive behavior. During this time, you may notice that the dog is whining, crying, or acting out. While you may want to give the dog a treat during these episodes, you should avoid rewarding them for this behavior. The dog may learn that they will earn treats if they whine. Instead, reward the dog when they are being good, such as when they are quietly resting. For example, you may notice that the dog is sitting outside of your bedroom door at night and whining. Instead of waking up to comfort the dog, go back to sleep. In the morning, you can pet and talk to the dog. If they are well-behaved, give them a treat with their breakfast. Good times to treat the dog are when the dog is resting quietly, when the dog is sitting with you, or right before you leave the house.
4. Weigh the pros and cons of getting a new dog. While a new dog companion might provide company for the dog, many older dogs do not do well with a new younger dog in the house. While some older dogs may enjoy having a puppy around, others may snap at the younger dog or bully them. Consider carefully whether a new dog is appropriate for the older dog. Also keep in mind that bringing in a new companion for the dog will not make them miss their old owner any less. If a friend or family member has a puppy, ask if they can be introduced to your older dog. This will show you how well the dog deals with energetic puppies. If the older dog plays, cuddles, or gets along with the puppy, you might consider getting a younger dog. Try taking the dog to a dog park when it’s not too crowded, and see if the dog seems to enjoy being around other dogs. If so, then you might consider bringing home a new dog. Another option is to adopt an older or senior dog. Try to find one with a similar temperament. See if the dogs can meet first before you adopt to see if they are friendly with one another.
| 4 | Short explanation... |
I have a friend who is a die-hard Chelsea fan. He has been to many Chelsea games and he knows everything about Chelsea. He is a very nice guy.
I have another friend who is a die-hard Manchester United fan. He has been to many Manchester United games and he knows everything about Manchester United. He is also a very nice guy.
I have a third friend who is a die-hard Arsenal fan. He has been to many Arsenal games and he knows everything about Arsenal. He is also a | Here is the summary:
Michael Thorpe was convicted of showing a Premier League game without having an agreement with official broadcasters in November 2006 at the Stoke Inn in Plymouth, Devon. He was fined £8,000 and ordered to pay costs. | 4 | Short explanation... |
1. What are the rules for putting a submit button in a form?
2. What are the rules for putting a submit button in a dialogue box?
3. What are the rules for putting a submit button in a mobile form? | Where to put the submit button should be decided in order to meet user expectations, it was best to put the button in the place that users expect to find it in the context of the form or dialogue they are using and with regard to the window size.
Forms tend to be left justified while the browser window can leave a ton of white space to fill up a large monitor (especially in full-screen mode). Since the users' eyes never leave the left portion of the window, we place the button on the bottom left. This is especially important for forms that use the field name above the field, with most fields lying flush left on the form (as opposed to fields to the right of their names).
Small Dialogue & Modal Windows are fixed width and tend to be small. Most contain simple phrases or questions, read right to left: having a button on the bottom right feels like both the most progressive position and the final resting place for the eye. Were the modal window large enough to contain a long form, we would probably follow the first principal for forms.
In the end, the heuristic is this:
* Large Windows & Forms get the button on the bottom left.
* Small Windows & Dialogues get the button on the bottom right.
Note the buttons on stackexchange sites:
* Post Your Answer button at the bottom-left of the longer form
* Add Comment button to the right of a small field
Furthermore, with mobile-first responsive being the new law of the land, the button placement varies even more based on context and user expectation. Sometimes, it's in the middle, too!
We're now starting to just put buttons on the left for even small forms if they're inline … and more forms are showing up inline through javascript. | 4 | Short explanation... |
How does the Eldar concept of 'hrondo' differ from the human concept of 'body'? | Tolkien himself addresses this in an essay called "Laws and Customs Among the Eldar". There are essentially two problems:
* Elvish libido diminishes over time. Contrary to popular belief (and outward appearance, from a human perspective), Elves do age; and as they get older, they get less interested in procreation.
* Having children is exhausting. The Elves believe that their child-bearing process draws a heavier physical and spiritual toll on them, compared to what it does to humans. They're understandable reluctant to have a lot of kids, because what's the point in having a dozen kids if doing so might literally kill you?
From "Laws and Customs":
It might be thought that, since the Eldar do not (as Men deem) grow old in body, they may bring forth children at any time in the ages of their lives. But this is not so. For the Eldar do indeed grow older, even if slowly: the limit of their lives is the life of Arda, which though long beyond the reckoning of Men is not endless, and ages also. Moreover their body and spirit are not separated but coherent. As the weight of the years, with all their changes of desire and thought, gathers upon the spirit of the Eldar, so do the impulses and moods of their bodies change. [...]
Also the Eldar say that in the begetting [conceiving], and still more in the bearing of children, greater share and strength of their being, in mind and in body, goes forth than in the making of mortal children. For these reasons it came to pass that the Eldar brought forth few children; and also that their time of generation was in their youth or earlier life, unless strange and hard fates befell them.
History of Middle-earth X Morgoth's Ring Part 3: "The Later Quenta Silmarillion" Chapter 2: "The Second Phase" Laws and Customs Among the Eldar
That last point about the toll on their mind and body is worth expanding on, and fortunately Tolkien does this later in the essay:
[A]ll the Eldar, being aware of it in themselves, spoke of the passing of much strength, both of mind and of body, into their children, in bearing and begetting. Therefore they hold that the fëa [soul], though unbegotten, draws nourishment directly from the fëa of the mother while she bears and nourishes the hrondo [body; later changed to the word hroä], and mediately but equally from the father, whose fëa is bound in union with the mother's and supports it.
History of Middle-earth X Morgoth's Ring Part 3: "The Later Quenta Silmarillion" Chapter 2: "The Second Phase" Laws and Customs Among the Eldar
| 4 | Short explanation... |
Answer:
The most important thing to remember here is that the two are not mutually exclusive. It is possible to have economic growth while also protecting the environment, and in fact in many cases it is necessary.
For example, pollution control is often seen as an impediment to growth, but in many cases it actually leads to it. Consider the Clean Air Act in the United States. When it was passed in 1970, many predicted that it would cripple the economy. In reality, while it did cause some short-term economic pain (as any transition does), in the | The most important thing to remember here is that the two are not mutually exclusive. It is possible to have economic growth while also protecting the environment, and in fact in many cases it is necessary.
For example, pollution control is often seen as an impediment to growth, but in many cases it actually leads to it. Consider the Clean Air Act in the United States. When it was passed in 1970, many predicted that it would cripple the economy. In reality, while it did cause some short-term economic pain (as any transition does), in the long term the economy grew substantially, and the cost of compliance with the act was actually less than predicted. This is because a cleaner environment leads to a healthier population, which is more productive. It also leads to less sickness, which reduces healthcare costs.
Similarly, investment in renewable energy has been a huge driver of economic growth in many countries. And it creates more jobs than fossil fuel energy production.
So in most cases, protecting the environment and promoting economic growth go hand-in-hand. You can't have long-term economic growth without a healthy environment, because without a healthy environment, the economy will eventually collapse. | 4 | Short explanation... |
Answer:
## Find out if you qualify for an exemption
1. Contact your county tax assessor. If you're not sure whether you qualify for an exemption, contact the tax assessor in your county. The tax assessor will be able to tell you whether you qualify and whether you'll need to fill out an application to apply for an exemption.
2. Fill out an application. If you qualify for an exemption, you'll need to fill out an application to apply for an exemption. You may be able to download the application from your | If you own real property (a home or land) in the United States, you are responsible for paying state property taxes each year. While these taxes are assessed through the county where the property is located, most counties in each state allow property owners to pay their taxes online. The specific information you need to pay your property taxes online depends on where your property is located.
## Calculate your payments
1. Look on your tax bill. You should receive an annual property tax statement in the mail that provides information about the amount of tax you owe each year. This statement also has other information, such as a property identification number or PIN, that may be necessary for you to pay your taxes online. Your tax bill may not include any delinquent taxes, or any other tax assessments, such as supplemental taxes. Those typically are sent separately.
2. Check online if you haven't received a bill. Just because you don't receive a bill doesn't mean you don't owe property taxes. In most states and counties, you can find out how much tax you owe by going to your state or county's property tax website. The amount of tax online typically will be more up to date than what's on your bill, so even if you have your bill handy you may want to check online. If there's a discrepancy, go by the amount online rather than the amount on your bill. Unfortunately, you may need a PIN or identification number located on the bill to access your tax amount online.
3. Call the tax assessor's office if you need more information. If you haven't received a bill and can't find the amount you owe on the website, you can always call the tax assessor's office and ask. The clerk should be able to give you the total amount of property tax you owe, as well as any other information you need, such as a PIN, so you can pay your taxes online.
4. Confirm the types of property tax you owe. Some states or counties may have different types of property taxes that you'll have to pay. You may have to check for different types separately. For example, in California you may have secured and unsecured property taxes. Unsecured property taxes are taxes on watercraft, airplanes, or temporary fixtures that are not connected to real property. These may be listed separately, or included on separate websites. Depending on where you live, certain types of property taxes may not be included in the online information. For example, the property tax website for Cook County, Illinois, does not include amounts for back taxes, air pollution taxes, and some other types of property taxes.
5. Confirm due dates for taxes owed. On the tax assessor's website, you'll find information about the dates property taxes are due each year. If you have any delinquent taxes, they typically are considered due immediately. If you pay your taxes on or before the due dates you'll avoid penalties, interest, and other fees. Plan ahead, especially if you won't be able to pay the total amount all at once.
6. Determine how much of your taxes you can pay. Particularly if you have delinquent taxes, you may not be able to pay all of your taxes at once. Access the website well before the due date, if possible, so you can budget for your payments accordingly.
7. Check to see if your mortgage company is paying your property taxes. If you have a mortgage on your property, your monthly mortgage payment may include an escrow amount that goes to pay your property taxes. When property taxes are due, your mortgage company will withdraw the money from the escrow account and pay them on your behalf. You typically still will get a bill or property tax statement, even though you don't owe anything. Check with your mortgage company if you're not sure so you don't end up paying twice.
## Make your payments
1. Visit your county or state's property tax website. Property taxes are assessed by county governments. The easiest way to find your county's property tax website is to check on your state's website for a link. Your state will have a .gov web address, so you can be assured that the link you find from the state website is the legitimate website for your county. This way you can make sure you keep all your information secure.
2. Enter information for your property. The information you need to enter to access your account and pay your taxes online differs among states and counties. Typically you'll have a PIN or property identification number that you must enter to correctly find your property. A street address typically isn't enough, because property may be assessed using parcel numbers or some other system of organization.
3. Do a search for your property. Some property tax assessors may allow you to look up the property identification number you need on the website itself. Others may require you to call the county tax assessor's office to get the information you need. If you don't have the information you need, look for a link that will allow you to search for your property. When you click on the link to pay your taxes, there should be a link close to the space where you would enter the information that you can follow to get the information you need.
4. Review acceptable methods of payment. Depending on the county, different methods of payment are accepted if you want to pay your property taxes online. Some methods of payment may come with an additional fee. If you pay using an electronic check, you typically won't have to pay a fee. Using a debit or credit card may incur a fee ranging from a few dollars to 2 or 3 percent of the amount of your payment.
5. Make your payment. Once you've entered the information you need and chosen your method of payment, simply enter the amount of money you want to pay along with your payment information to pay your property taxes online.
6. Print your confirmation. Once you've submitted your payment, you'll typically get a confirmation screen that will include a unique confirmation number and an option to print the page for your records. You may also get a confirmation through email. If you get an email confirmation you don't necessarily have to print a paper copy, just make sure to save the email.
## Use other online resources
1. Create a portfolio. If you own several parcels of property in the same state or county, you may be able to create a portfolio of properties on your state or county's property tax website. The portfolio allows you to manage all of your property taxes in one place. Look for a link on the property tax page that will allow you to create a portfolio, and follow the instructions. If you don't see a link, look for a FAQ page and see if anything is listed about how to link multiple properties.
2. Set up recurring payments. Some states and counties allow you to enter payment information once and schedule payments, which are automatically deducted from your bank account or credit card. If you have the option to schedule payments, this can be helpful with budgeting. You can schedule a partial payment each month so you don't have to pay the whole thing all at once. Mark your payment dates on your calendar or set a reminder on your phone so you don't forget that the payment is coming out.
3. Subscribe to email notifications. Some counties provide email notifications that will alert you before the due date for property taxes, or when there have been changes to your account. If you weren't able to set up recurring payments, these notifications can help you ensure you don't miss a due date and incur additional penalties and fees. If you subscribe to email notifications, you may want to add the email address to your contacts list or preferred addresses list. This will ensure you actually receive the notifications and they don't fall into your spam folder.
4. Apply for a payment plan. Most counties allow you to set up a payment plan if you have delinquent property taxes. You typically have to fill out an application, and may be subject to a credit check. Some counties also allow payment plans even if your taxes are current, if you anticipate you won't be able to pay the amount in full by the due date. If this option is available to you, it can save you in potential late fees and penalties. A payment plan typically requires the payments to be automatically debited from your bank account.
| 4 | Short explanation... |
Given an array of integers, return the first index of the first element that satisfies the given condition.
For example, given the array [2, 3, 4, 5, 6, 7], return 3.
Your algorithm's runtime complexity must be in Ο(log n).
```
def find_first(arr, condition):
"""
Find the first element in an array that satisfies a condition
:param arr: an array of integers
:param condition: a boolean expression
:return: the index of | This is a classic problem in Computer Science called weighted job scheduling, which has an efficient solution using dynamic programming. Here is a Python implementation of that solution:
```
# Importing the following module to sort array based on our custom comparison function
from functools import cmp_to_key
# A job has start time, finish time and profit
class Job:
def __init__(self, start, finish, profit):
self.start = start
self.finish = finish
self.profit = profit
# A utility function that is used to sort events according to finish time
def job_comp(s1, s2):
return s1.finish < s2.finish
# Find the latest job (in sorted array) that doesn't conflict with the job[i]. If there is no compatible job, then it returns -1.
def last_no_conflict(arr, i):
for j in range(i - 1, -1, -1):
if arr[j].finish <= arr[i - 1].start:
return j
return -1
# The main function that returns the maximum possible profit from given array of jobs
def last_no_conflict(arr, n):
# Sort jobs according to finish time
arr = sorted(arr, key=cmp_to_key(job_comp))
# Create an array to store solutions of subproblems.
# dp[i] stores the profit for jobs till arr[i] (including arr[i])
dp = [None for _ in range(n)]
dp[0] = arr[0].profit
# Fill entries in table recursively
for i in range(1, n):
# Find profit including the current job
profit = arr[i].profit
lnc = last_no_conflict(arr, i)
if lnc != -1:
profit += dp[lnc]
# Store max of including and excluding the job
dp[i] = max(profit, dp[i - 1])
# Return max profit during final step
return dp[-1]
```
While this implementation has O(n^2) time complexity for simplicity, the solution can be optimized to O(n*logn) by replacing the linear search in last_no_conflict() with binary search.
| 4 | Short explanation... |
I want to paint my kitchen, but I don't know what color to choose. I've been looking at a few paint chips, but I can't decide which one to choose. Can you help me?
### Hint | Whether you need to touch up a scratch on your living room wall or your child wants their bedroom to be the exact same color as their favorite toy, it can be difficult to find a perfect match to an existing paint color. Luckily, there are plenty of tricks and tools that can help you find the color you’re looking from, including using paint samples, smartphone apps, and in-store computerized color matching!
## Match paint without a sample
1. Clean the area you're trying to paint match. Over time, fingerprints, dust, and dirt can collect on the surface of an object or a wall, and this can make the paint color seem darker than it actually is. To make sure you're testing the actual color, wipe the paint down with a damp, soapy sponge, and allow it to dry completely before you try to match the color. In addition to giving you a more accurate color match, cleaning the wall will help the new paint adhere better.
2. Scrape off a 1 in (2.5 cm) sample of drywall paint with a razor knife. If you’re trying to match paint on sheetrock or drywall, the easiest way to get a perfect match is to bring a sample with you to the paint store. Use a utility knife to score a square into the surface of the sheetrock about ⁄8 in (0.32 cm) deep, then peel away the paper. Place the sample in a plastic bag or an envelope so it doesn’t get smudged before you get to the paint store. Once the store has analyzed the color, dab a little of the paint onto a corner of the sample and let it dry to ensure it’s a perfect match.
3. Bring the item you’re matching to the paint store if it's portable. Thanks to the computerized color-matching technology at most paint stores, you can match almost anything! If you’re trying to find a paint that’s the same color as an object, you can bring that object in with you when you go to buy paint. The staff at the paint store will then scan the item and come up with an exact or near-exact digital match to the color of the object. If there’s not an existing color that matches your object, the paint store can mix one up for you.
## Find a match with an app
1. Download a paint-matching app if you can’t take a sample. Most major paint brands have their own apps for matching paint colors, including Sherwin-Williams, BEHR, Glidden, and Valspar. Visit the app store on your smartphone and choose an app that will scan your wall color and provide you with a color match. If you remember the brand you used originally, download their app. If you don’t know the brand, try a few different apps to see which gives you the closest match, or try an app like Paint My Place which uses multiple paint brands.
2. Scan your paint in natural lighting for the best result. Differences in lighting can make your paint more yellow or more blue, depending on which type of light is being used. To avoid these inconsistencies, try to test your paint sample in an area with plenty of natural light if you can, like near an open window or door. Since natural light changes throughout the day, it may help to take a color reading in the morning, afternoon, and evening. If your room doesn’t have much natural light, use the room’s primary light source to test the paint. Incandescent lights will make paint seem warmer, while fluorescent lights look cooler. Halogen bulbs more closely resemble daylight.
3. Test the paint in an inconspicuous area to make sure it’s a good match. Differences in lighting and cameras can make digital paint matching imprecise. If you purchase paint based on the results you get from an app, be sure to test it somewhere where the difference won’t be obvious. Let the paint dry completely before you check whether it’s a match, since wet paint can look like a different color at first.
4. Purchase or borrow a color scanner for a more precise match. Apps rely on your smartphone’s camera to get a color match, but you can get more accurate results with a small device that scans paint colors using an independent camera with its own lighting. If you’ll be doing a lot of color matching, it can be worth the investment. These color scanners are $65-$100 at most home stores and connect to your phone via Bluetooth.
## Use a color sample
1. Take a picture of the original color before you go to the paint store. If you’re planning to pick up color samples from the paint store, take along a photo of the original paint. Pictures won’t give you an exact color match, but they can be helpful if you’re trying to remember the general hue. If you can, try snapping pictures at different times of day, since the changes in lighting will make the paint look different. If you’re in a hurry and don’t have time to wait a few hours for the light to change, try taking pictures with the flash on and off, or with the main light on, followed by lamplight. Holding up a true white piece of paper or cardstock in the picture can help your camera to automatically correct the color balance.
2. Choose a handful of samples to bring home with you. The lighting in the paint aisle won’t be the same as it is in your home, and different shades can seem really similar, so it’s important to bring the paint samples to the wall to compare the colors. Choose a handful of colors that seem close to the shade you want to match. If you’re not sure what brand the original color was, be sure to get shades from several different brands, as well. If you like, you can also purchase or borrow a fan deck of colors from the paint store so you’ll have access to all of the shades a particular brand offers.
3. Tape the samples to the wall and examine them at different times of day. It can be tempting to just hold up the samples and immediately choose which one is the closest, but since the color of the room will change slightly as the sun moves throughout the day, you should hang the samples and come back to them every couple of hours. Of course, if none of the samples are a match, you will probably be able to tell right away. If one sample is a match early in the day and another matches better in the evening, ask the paint store if they can mix a shade in between.
4. Paint a small section of each color on the wall if you’re still not sure. Most paint stores will sell you a small can of paint that you can use to paint a sample. If you can’t decide between 2 or 3 different shades, purchase a sample size of each. Paint a small swatch of each color onto the wall and look at them for a few days before making your final decision. In addition to changes in light throughout the day, changes in weather can also affect your paint color. Your swatches might look different on a sunny day than they do on a day when that’s overcast.
| 4 | Short explanation... |
I have been having chest pains for the past few weeks. I went to the doctor and she said it's probably stress, but I'm not convinced. I've been feeling really anxious lately. Could it be anxiety? | Chest pain is never something to ignore. There are many things that could be causing it, and some of them are very serious, including heart problems, lung conditions, digestive issues, and others.
If you have a history of heart problems or related disease, call emergency services (911 in the US) immediately. Do not try to drive yourself to the hospital. Before the ambulance comes, here are a few things you could do:
* Take a deep breath and count to 3. This will help relax you and slow your heart rate.
* Lie down in a comfortable position.
* Loosen your clothing, particularly your shirt. This will allow your heart to cool.
* Take an over-the-counter aspirin tablet, unless you are allergic to aspirin or have been told by your doctor not to take it. This can help thin blood and prevent clots from forming.
* Monitor your pulse. If you feel your pulse getting faster or slower, this is a sign your heart is in trouble. Tell the paramedics when they arrive. | 4 | Short explanation... |
I have a MySQL server running in a container.
I want to access it from outside of the container.
How can I do that? | By default after deployment MySQL has following connection restrictions:
```mysql> select host, user from mysql.user;
+-----------+---------------+
| host | user |
+-----------+---------------+
| localhost | healthchecker |
| localhost | mysql.session |
| localhost | mysql.sys |
| localhost | root |
+-----------+---------------+
4 rows in set (0.00 sec)
```
Apparently, for the security purposes you will not be able to connect to it outside of the docker image.
If you need to change that to allow root to connect from any host (say, for development purposes), do:
* Start your mysql image with all port mappings required:
```docker run -p 3306:3306 --name=mysql57 -d mysql/mysql-server:5.7```
or, if the complete port mapping is required:
```docker run -p 3306:3306 -p 33060:33060 --name=mysql57 -d mysql/mysql-server:5.7
```
* If this is the fresh installation - grab the default password:
```docker logs mysql57 2>&1 | grep GENERATED```
* Connect using ```mysql``` client directly to the mysqld in docker:
```docker exec -it mysql57 mysql -uroot -p```
* If this is the fresh installation you will be asked to change the password using ```ALTER USER``` command. Do it.
* Run SQL:
```update mysql.user set host = '%' where user='root';```
* Quit the ```mysql``` client.
* Restart the container:
```docker restart mysql57```
Now you will be able to connect from MySQL Workbench to
```host: `0.0.0.0`
port: `3306`
```
After all the changes the query will show:
```select host, user from mysql.user;
+-----------+---------------+
| host | user |
+-----------+---------------+
| % | root |
| localhost | healthchecker |
| localhost | mysql.session |
| localhost | mysql.sys |
+-----------+---------------+
``` | 4 | Short explanation... |
Answer: | This only really applies to over the board games (since online chess servers prevent illegal moves).
In a standard time control game, under USCF rules, when the illegal move is noticed by one of the players, a few things happen. First, the illegal move must have been made within the last 10 moves. If not, then the current position stands, and play continues. Assuming that the move is recent, the position is restored to the position immediately before the illegal move.
Then, the player that made the illegal move now must make a legal move with the same piece (if one exists). If there are no legal moves, then the player is free to make any move. This is due to the touch move rule. Finally, if the offending player has pressed the clock, a two minute "bonus" is added to the opponent's clock to compensate them for any time lost and to penalize the offending player.
Here is the relevant passage from the USCF rulebook:
11A. Illegal move during last ten moves. If, during a game, it is found that one of either player's last ten moves was illegal, the position shall be reinstated to what it was before the illegal move. The game shall then continue by applying Rule 10, The Touched Piece, to the move replacing the illegal move. If the position cannot be reinstated, then the illegal move shall stand. Move counters on clocks that have them may by readjusted.
11D. Illegal move. If, a player completes an illegal move by pressing the clock, in addition to the usual obligation to make a legal move with the touched piece if possible, the standard penalty specified in rule 1C2a applies (i.e. two minutes added to the opponent's clock).
In blitz chess, the rules are different. According to the WBCA (World Blitz Chess Association) rules, a player who makes an illegal move loses the game instantly. This rule is frequently enforced in casual games too. The most common way that this occurs is that one player doesn't notice that they are in check and makes a move that doesn't get out of check. Then the checking player simply captures the king and claims a victory.
Because blitz is a much faster pace game, the illegal move must be noticed within two moves. If it is not, then the current position stands and play continues.
At no point is the game cancelled due to an illegal move. Pretty much once a game starts and both players make a move, a result of win, loss, or draw will be recorded. | 4 | Short explanation... |
Answer:
Question: | If I could spend my life never sleeping, some of the things I might do with that extra time include:
* Spend more time with friends and family. I can use the extra time to develop stronger ties and bonds with my loved ones, including my family members and close friends. I might watch films more often with them or host games at night that we can play together. Or, I might organize more potluck parties where each one bring a dish.
* Enjoy my favorite hobbies more (or discover new ones). I could use the extra time to take dance and music lessons, read more fiction books, collect action figures, etc. In addition, I would love to develop some new hobbies that I have always wanted to try, e.g. skiing and bouldering.
* Travel and see more of the world. If I had lots of extra time, I would use them to travel around the world to experience life in different ways. I could explore new places, cultures, cuisines, traditions, and ways of living. I can also make friends with people from different backgrounds.
* Exercise and improve my physical condition. With more extra time, I would become more active and commit to a healtier lifestyle. For example, I'll stick to a regular fitness plan and increase my physical activity by adding strength training and taking a Yogo class.
* Work more to advance my career and personal growth. I might use the extra time to learn new skills outside of my primary career. For example, I would learn a new language or pursue a part-time job in art history or education. Moreover, I would get out of my comfort zone and become more proactive in buidling my network.
* Get more involved in my community. With all of the extra time available to me, I could devote myself to volunteering or giving back to my local community. This might involve working with organizations like soup kitchens, animal shelters, or environmental conservation groups. Alternatively, I might consider starting my own nonprofit organization focused on addressing issues that matter most to me. | 4 | Short explanation... |
#
# 4
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
# | None linger by his side but the bitter wind's empty murmur. Memories flickering by his mind's eye, he is reminded of his loss. The whole world seems to mock him, gibe him, twist him into comedy, surround him with sinister mirth. Soon enough the shrieks of vicious joy infest his very mind, consuming hope of rescue from his supreme torment, giving no shelter but simply joining in. So his misery wells up within him, woeful hysterics erupting from his very soul, echoing through this bitter new world. | 4 | Short explanation... |
How many days does it take to trek to the Amarnath Temple?
## Visit the temple
1. Get a Compulsory Health Certificate from a doctor approved by the Shri Amarnathji Shrine Board (SASB). Look at the list of approved doctors on the SASB website and schedule an appointment to see one. Bring the Compulsory Health Certificate from the site with you and fill out the self-assessment on top. Allow your doctor to run any tests to check if you’re fit for traveling to the Amarnath Temple | ## Plan and prepare for the trip
1. Plan to visit between June and August. Since snow and ice usually cover the cave temple, you won’t be able to access it during the cold winter and spring months. Wait until mid-June or July to plan your trip to the Amarnath Temple. Usually, the cave stays open through the first 1–2 weeks of August before it closes due to the terrain getting too difficult for travel. The actual dates when you can travel to the temple are chosen by the Shri Amarnathji Shrine Board (SASB) and it varies depending on the weather and how clear the trails are. You will not be able to reach the Amarnath Temple at any other time of the year.
2. Get a Compulsory Health Certificate by a doctor approved by the SASB. Look at the list of approved doctors on the SASB website and schedule an appointment to see one. Bring the Compulsory Health Certificate from the site with you and fill out the self-assessment on top. Allow your doctor to run any tests to check if you’re fit for traveling to the Amarnath Temple. If they approve you for traveling, then you’ll be able to make the journey.You can find the Compulsory Health Certificate for 2020 here: http://www.shriamarnathjishrine.com/Yatra2019/CHC%20form%20for%20Yatra%20-%202020.pdf. The certificate you need changes each year, so make sure you’re using the proper one. Since the Amarnath Temple is 4,000 metres (2.5 mi) above sea level, it’s possible to get altitude sickness if you aren’t fit enough for the trip.Warning: You will not be allowed to go to Amarnath Temple if you are under 13, over 75, or more than 6 weeks pregnant.
3. Submit a registration form online to the SASB. Select the date you want to travel to the temple on the calendar at the top of the page. Fill out the personal details on the registration form completely, including your name, birthday, phone number, and address. Then, list the clinic and doctor that completed your Compulsory Health Certificate. Upload a photograph of yourself and a scanned copy of the certificate before submitting the registration form.You can find the online registration form here: http://jksasb.nic.in/register.aspx. If you are accepted to travel to the temple, you will receive a text or email message about how to pay the 50 INR ($0.70 USD) fee. When you receive a permit, you must keep a copy on you at all times during your trip.
4. Start taking 4–5 km (2.5–3.1 mi) walks 1 month prior to your trip. Start building up your endurance at least 1–2 months before your scheduled date of departure. Try to take the walks in the early morning or evening so you can get used to breathing in cool air. Continue taking walks each day up until you leave so you don’t get exhausted while you hike to the temple.You can also practice deep breathing exercises and yoga so you’re able to improve your oxygen efficiency. This will help you breathe easier when you’re at a higher altitude since there isn’t as much oxygen in the air.
5. Pack warm clothes, waterproof shoes, a water bottle, and a walking stick. Only bring a lightweight, waterproof bag so you don’t get exhausted while you’re trekking to the temple. Opt for wool clothes that are waterproof so you stay warm. Make sure you use waterproof trekking shoes and a walking stick so you’re easily able to traverse more difficult terrain. Since you'll be active, opt for a reusable water bottle as well.Other things you may need for your trip include an umbrella, flashlight, hat, gloves, and a raincoat. The weather can be unpredictable and temperatures may dip below 5 °C (41 °F) during the night. You don’t have to bring tents or sleeping bags since there will be sites where you can spend the night.
## Get to the temple
1. Choose the Pahalgam route for an easier trek that lasts 3–5 days total. Select Pahalgam as your starting point if you want to follow the traditional pilgrimage route to the temple. While the trip does take longer to complete, it doesn’t have any steep slopes that are difficult to climb, and you can ride or use ponies during most of the ascent. You will hike about 48 kilometres (30 mi) if you go from Pahalgam to the Amarnath Temple. You don’t have to pay any additional fees to take the Pahalgam route.
2. Pick the Baltal route for a steep climb that only takes 1–2 days round trip. If you’re an experienced climber or you feel like making the trip within a shorter amount of time, opt to start in Baltal, which is just north of the temple. Though the route from Baltal is much steeper than the path from Pahalgam, you can make the round-trip journey within a day.Plan to hike about 14 kilometres (8.7 mi) using the Baltal route. If you’re too tired to descend back to Baltal, you can opt to stay at a camp at the top overnight before leaving the next day. There are no other fees to take the Baltal route.Warning: Ponies are not allowed on the Baltal route since it’s too steep, so you will have to walk the entire way.
3. Fly into Srinagar to get the closest to either base camp. Look for flights that come into the Srinagar International Airport, since it’s only 2–3 hours from both Pahalgam and Baltalhead. Try to schedule your flight into the airport 1–2 days before the date you’re scheduled to go to Amarnath Temple so you have time to travel.You can also fly or take a train to Jammu, but you’ll need to drive or take a bus further to to the base camps.
4. Take a bus or taxi to the base camp you selected. Look for a bus or taxi service that runs from Srinagar to either Pahalgam or Baltal, depending on which route you plan on traveling. Typically, your ride will only last around 2–3 hours, but it may take longer depending on the road conditions.If you have a vehicle, you can also drive yourself to the base camps. Usually, there is some on-site parking, but it may be busy due to the number of travelers for the pilgrimage.
5. Hire a helicopter tour if you don’t want to hike all the way to the temple. Helicopters fly out from both Pahalgam and Baltal, so you can reserve them for either base camp. Choose the date that you want to travel to the temple and reserve your spot. Arrive at the helicopter port on your scheduled day and take it up toward the temple. The helicopter will be able to take you as close as 6 kilometres (3.7 mi) away, but you will need to hike the rest of the way.Typically, a helicopter tour will cost around 3,600 INR ($50 USD) for a round trip.
## Trek to the cave
1. Carry your belongings in a waterproof bag. Store your clothes and everything you’ve brought with you in a waterproof bag or backpack so they don’t get wet. Use a bag that fits tightly on your shoulders and back so it doesn’t cause any strain while you climb up to the temple. Make sure you zip the bag at all times so water doesn’t leak inside or get your things wet. Weather can be unpredictable during your ascent, so it may snow or rain while you’re climbing to the temple.
2. Stop at tea stalls or small restaurant huts for meals and drinks. Look for small huts or stands along the route to the temple to see what kind of food and drinks they offer. Pay for the rations and enjoy them at one of the camps along the route. Otherwise, save non-perishable food in your bag so you can have it later during your trek.Some stalls may charge for food while others volunteer and provide meals for free.Tip: Always carry some back-up snacks, such as dried fruits or nuts, with you so you can eat as you get hungry.
3. Protect your skin with sunscreen or petroleum jelly. Keep a bottle of sunscreen or petroleum jelly in your bag so you have access to it whenever you need it. Apply it to your exposed skin and rub it in until it’s clear so it can absorb fully. After 2 hours, put on another layer so you stay protected from the sun.Petroleum jelly can also help keep your skin from drying out due to the cold, dry air.
4. Rest at the camps set up along the route. Look for tents and huts along the route where you’re able to rest for the night during your trip. Pay for tent rental and take time to relax so you don’t feel too exhausted when you reach the shrine. Make sure your clothes aren’t wet before you fall asleep so you don’t get cold at night.If you’re shivering, slurring speech, experiencing blurry vision, or feeling nauseous, you may be experiencing altitude sickness. Rest as soon as possible and avoid climbing any higher.
5. Pray to Shiva at the ice lingam when you reach the holy shrine. When you reach the Amarnath Temple, take off your shoes and enter the cave to see the ice lingam, which is a tall column of ice that’s considered holy. Say a prayer to Shiva while you’re next to the lingam before exiting the shrine.
| 4 | Short explanation... |
Q: What is the best way to install a deck around an above ground pool? | Above ground pools are a modern, easy-to-install alternative to traditional underground pools. If you want to blend your above ground pool in with the rest of your yard, decorating it is a great way to start. With a few natural and practical decorations, like plants or a pool chairs, you can make your above ground pool a stylish part of your backyard. For siding options, you can install a deck, concrete or wood paneling, or glass panels.
## Add natural decorations
1. Set up potted plants as botanical decorations. Adding potted plants around your above ground pool can help it blend in with the rest of your backyard. If you install a deck, position a few potted plants around the sides or around the bottom of the pool. You can also grow trees or shrubs around the above ground pool as a long-term alternative.
2. Add tiki torches to brighten up the area surrounding your pool. Tiki torches are a popular way to give your above ground pool an outdoorsy touch. Stake the tiki torches in the ground surrounding the pool at an even distance from each other, positioning them upright to prevent them from tilting. You can buy tiki torches online, from a garden center, or at many home improvement stores. String lights around the tiki torches for cheap and stylish lighting while swimming at night.
3. Use straw bales if you want a rustic siding. Straw bales can make a cheap, natural siding for above ground pools. Stack the straw bales around the sides to approximately halfway up the above ground pool's height to use as a decoration and partial step into the pool. You can buy straw bales from some agricultural supply stores or plant nurseries. To keep the straw out of the pool, do not stack the straw bales to the full height of the pool.
## Choose practical decorations
1. Set up a cover to use as shade. Put up an umbrella, trellis, or pergola over the pool during summer months or in hot, sunny climates. If you have any naturally shady areas in your yard, construct the pool near these areas as an alternative. A cover decoration can help keep your pool cooler and prevent those who use it from getting sunburned.
2. Add cushions or chairs as seating near the pool. Seats are perfect for tired swimmers who need a quick rest. Set up a few lawn chairs, waterproof cushions, hammocks, or other seats below the pool or on the deck (if applicable) for easy access after you swim. You can buy pool chairs from some home decor stores or online.
3. Put up a foldable cover over the top to keep your pool safe and clean. To prevent debris from getting inside the pool and accidents with children or pets, buy a foldable pool cover online or from a pool supply store. Use the foldable cover overnight or while going on vacations where you won't be able to routinely clean the pool. Pool covers are also useful during winter or off-season months if you don't want to drain it.
4. Install a table near your pool for towels, snacks, and drinks. If you use your pool for lounging, use a table as a makeshift "poolside bar" or coffee table. Set the table up near the edge of your pool or deck, depending on your pool's siding. Unless you set your table up on the deck, choose a table with a similar height as your above ground pool.
5. Set up lights or heat lamps around the pool for added illumination and warmth. If you plan to use your pool at night, position a few outdoor lamps surrounding the pool. For those in cold climates or who use their pool in the winter, choose heat lamps to stay warm while swimming.
6. Fence your pool in to separate it from the rest of your yard. A fence can help your pool feel enclosed and keep pets or young children out. Measure the perimeter of your yard and put up a fence around the entire area with a gate near the entrance.
## Build deck and side
1. Install a deck around your pool's side for a more finished look. To help your pool blend in with the surrounding backyard, build a deck around the sides that is approximately level with the pool. You can build the deck yourself or hire a contractor to build it for you. Building a deck around the pool is the best way to give it the appearance of an underground pool. If you prefer, you can install a deck with wide sides around the above ground pool and set up chairs or other pool furniture
2. Set up concrete siding around the pool to secure it in place. For a more urban look, mix a batch of concrete and set up a wall on each side of the pool. If you have experience working with concrete, you can do it yourself. If not, you can hire a landscaper instead. Concrete is sturdy and more weather-resistant than wood but isn't as natural looking.
3. Try wood paneling as a simpler alternative to building a deck. If you like the rustic look of decks but don't want to commit to the cost or time, line up wood panels around the sides of the pool. Secure the panels in place with an outdoor wood adhesive and apply a sealant to protect it from UV rays and harsh weather. For water-resistant wood stains, try polyurethane varnish, exterior paint, or Danish oil. Wood paneling can give the above ground pool a more finished appearance without as much construction as decks.
4. Set up glass panes around the edges for a finished look. To give your above ground pool a look similar to a below ground pool, try setting up glass paneling. Buy or cut glass panes the approximate width of your above ground pool and hire a contractor to fix them on top of the siding. Setting up glass panels works best with deck siding.
| 4 | Short explanation... |
Answer:
### 1.1.1
Question: | Smooth edges. Clean streets. People bustle about, heading to lunch, with smiles on their faces. Posters line the walls of the city saying "Be Your Brother's Keeper" or "Arcadia is Our Mother". Loudspeakers chime in with daily reminders about citywide events or milestones met. "Without Arcadia," says the woman on the announcements, "we are nothing." Police in crisp white uniforms patrol the streets on foot, and everyone smiles and nods at them. Above, through the small clouds, an impossibly tall tower can be seen standing at the center of the sprawl.
A great wall surrounds the city. The First Founders began building it long ago, during their age, and by the time their generation had passed it was finished. A dull grey barrier, blocking Arcadia off from the outside world. Every man, woman, and child knows what lies beyond. Ruins of the fallen world, the world that came before. Anyone is free to leave, but such a thought rarely ever crosses the mind. They are taught the truth when they are young, how societies collapsed after fossil fuels ran out. How wars were fought not for land, but for water. How the nuclear missiles, the Dust Makers, were made. How terrifyingly destructive they had been. How they had sailed through the air like shooting stars before crashing back down to Earth like meteors.
They picked through the ashes and learned from their ancestor's mistakes. They come together as a community, and stay together as a community, for each other's sake. Division, the teachers said, is what split the old world apart. People were separated, not just by the borders of their country, but by the borders they made themselves. Race. Class. Religion. Political views. In Arcadia, these things still exist, but the people are taught to embrace their difference. To cherish it. To not let it consume and divide them.
Because if there is division, there is no Arcadia. And without Arcadia, they are nothing. | 4 | Short explanation... |
I have $10,000 in an IRA. What should I do with it? | First off, I highly recommend the book Get a Financial Life. The basics of personal finance and money management are pretty straightforward, and this book does a great job with it. It is very light reading, and it really geared for the young person starting their career.
Now, with that out of the way, there's really two kinds of "investing" to think about:
1. Retirement (401k, IRA, SIMPLE, etc)
2. Non-Retirement (Brokerage account, investing in individual stocks, day trading, etc)
For most individuals, it is best to take care of #1 first. Most people shouldn't even think about #2 until they have fully funded their retirement accounts, established an emergency fund, and gotten their debt under control.
There are lots of financial incentives for retirement investing, both from your employer, and the government. All the more reason to take care of #1 before #2!
Your employer probably offers some kind of 401k (or equivalent, like a 403b) with a company-provided match. This is a potential 100% return on your investment after the vesting period. No investment you make on your own will ever match that. Additionally, there are tax advantages to contributing to the 401k. (The money you contribute doesn't count as taxable income.)
***The best way to start investing is to learn about your employer's retirement plan, and contribute enough to fully utilize the employer matching.***
Beyond this, there are also Individual Retirement Accounts (IRAs) you can open to contribute money to on your own. You should open one of these and start contributing, but only after you have fully utilized the employer matching with the 401k. The IRA won't give you that 100% ROI that the 401k will.
Keep in mind that retirement investments are pretty much "walled off" from your day-to-day financial life. Money that goes into a retirement account generally can't be touched until retirement age, unless you want to pay lots of taxes and penalties. You generally don't want to put the money for your house down payment into a retirement account.
One other thing to note: Your 401K and your IRA is an account that you put money into. Just because the money is sitting in the account doesn't necessarily mean it is invested. You put the money into this account, and then you use this money for investments. How you invest the retirement money is a topic unto itself. Here is a good starting point. | 4 | Short explanation... |
I'm an American citizen who is currently living in China. I'm a college student, and I'm a Christian. I've been following the news about China's persecution of Christians, and I'm very concerned. I've heard that the government is making it difficult for foreigners to practice their faith. Is this true? What can I do to protect myself? | In general, employers in the United States are free to fire you for your speech. The First Amendment does not apply to anyone except the government (other than a narrow set of circumstances where private parties act on behalf of the government or take on government roles, like when private universities employ campus police). If the officer was being fired from a job at a private company, this would not be an interesting question -- the answer would clearly be "no, there is no First Amendment claim here." That’s not to say labor laws might not come into play (for instance, federal law prohibits firing an employee for organizing a union, and some states prohibit firing for off-duty political speech); however, labor law protections exist by statute and are not derived from the First Amendment.
What makes this interesting is that the government is involved. Unlike private employers, government agencies are bound by the First Amendment. In Pickering v. Board of Education, the Supreme Court held that this does restrict them in their role as employer and that they can't necessarily fire an employee for speech. Pickering imposes a balancing test, where the harm to the employee's First Amendment rights is weighed against the government's interest in efficient operation. Courts have given particular leeway to police departments punishing speech that would undermine public trust and confidence in the department. A police officer expressing racist views, even privately, can seriously hamper the effectiveness of the department if the speech gets linked back to them. For instance, see Pappas v. Giuliani, where the Second Circuit upheld the firing of an NYPD officer for anonymously mailing racist diatribes from home in his off-duty time.
Another answer suggests that the main question is a public safety one: whether the officer could be trusted to carry out his duties without bias. But that's not the only legitimate consideration for the government employer. The courts have repeatedly held that public perception of an agency is a legitimate concern, especially when it comes to agencies (like the police) whose job requires maintaining good relations with the community. In Pappas, the officer was assigned as a computer operator who had no contact with the public, but he was still a police officer whose speech had a high potential to undermine NYPD community relations. | 4 | Short explanation... |
You're observing shamefully bad journalism. The "protect Earth from aliens" bullet point in the "Highlights" section of the article was put there by an editor who either ignorantly or willfully distorted the actual role of the Planetary Protection Officer.
The first paragraph of the story gets a little closer:
The full-time role of "planetary protection officer" will involve ensuring that humans in space do not contaminate planets and moons, as well as ensuring that alien matter does not infect Earth.
"Planetary Protection Officer" isn't a new position; the current one is retiring. The primary focus of the planetary protection office is sterilizing probes that are going to other planets and moons. This is done both to preserve any existing life elsewhere in the solar system from Terran competition, and so that if and when we find life on other bodies, we will know we didn't bring it ourselves.
Preventing microbes from other worlds reaching Earth is also a concern, for similar reasons.
Developing and implementing the policies of the planetary protection office is a complex job requiring a broad array of both technical and human skills, and so a $187K salary is not remarkable for it:
Candidates will be required to travel frequently — but like any job, there will be a significant amount of emails, proposals and other reading.
Candidates must have at least one year's experience as a top-level civilian government employee, and an advanced degree in physical science, engineering or mathematics. They must also have "advanced knowledge" of planetary protection.
The position also requires "demonstrated skills in diplomacy that resulted in win-win solutions during extremely difficult and complex multilateral discussions". The new hire will also receive "secret" security clearance. Only US citizens and US nationals can apply.
| 4 | Short explanation... |
|
I'm looking at the scene from a specific point. How can I get the camera to look at that point? | Situation 1: You're not looking through the camera yet
* Fly Mode: Shift + F or the standard Viewport Navigation
* Set Camera to View: Ctrl + Alt + Numpad 0
Situation 2: You're already looking through the camera via Numpad 0
* Select the camera: Right Mouse Button
* Grab: G & optionally...
* Lock the grab to a local axis: XX or YY or ZZ (my favorite)
* Rotate:
* Tilt: R
* Look around: R R
* Orbit around the 3D cursor: .R followed by R, or Z. (Press , afterwards)
Tips & Notes (some go beyond this question):
1. In earlier versions of Blender, Fly Mode would to make the camera slowly flatten with the horizon line. It doesn't anymore, but you can reset the camera's rotation Alt + R to make the horizon flat and then use fly mode to reorient the camera while maintaining that flat horizon.
2. If you decide to use another object as a target for the camera to look at, you can use the Object Constraints. To do this:
* Select the camera.
* Shift-select the target.
* Press Ctrl T and select Track To or Damped Track To. You can modify the new constraint in the camera's Constraints panel, for example, to animate the influence. | 4 | Short explanation... |
I have a script that is supposed to copy files from a source directory to a destination directory.
```cp -r /templates/apple /templates/used && cp -r /templates/apple /templates/inuse && rm /templates/apple```
The script fails, but I'm not sure why. | You are using ```|``` (pipe) to direct the output of a command into another command. What you are looking for is ```&&``` operator to execute the next command only if the previous one succeeded:
```cp /templates/apple /templates/used && cp /templates/apple /templates/inuse && rm /templates/apple
```
Or
```cp /templates/apple /templates/used && mv /templates/apple /templates/inuse
```
To summarize (non-exhaustively) bash's command operators/separators:
* ```|``` pipes (pipelines) the standard output (```stdout```) of one command into the standard input of another one. Note that ```stderr``` still goes into its default destination, whatever that happen to be.
* ```|&```pipes both ```stdout``` and ```stderr``` of one command into the standard input of another one. Very useful, available in bash version 4 and above.
* ```&&``` executes the right-hand command of ```&&``` only if the previous one succeeded.
* ```||``` executes the right-hand command of ```||``` only it the previous one failed.
* ```;``` executes the right-hand command of ```;``` always regardless whether the previous command succeeded or failed. Unless ```set -e``` was previously invoked, which causes ```bash``` to fail on an error.
| 4 | Short explanation... |
The answer is: | Once upon a time, Death was the teeth that hunted us under a bright moon. We ran and we shivered, waving our little fire-sticks around.
Once we had settled, Death was the dry season that failed to end, the diseases that killed entire villages. She was famine and boils and warfare.
We grew a little bit and started thinking too much. Death became the emptiness behind words on paper, extinction of languages and passenger pigeons. Death became forgetfulness.
Soon, we no longer needed to have five children to ensure that two would survive to adulthood. We conquered disease, destroyed warfare, filled our souls to the brim with knowing and still didn't understand anything.
We stand on the surface of the moon, or mars, or alpha centauri, and we look back at the single shimmering pixel that we emerged from. Death can't touch us, we who move between the stars, we who record all things and all memories. She is but a whisper in the void between stars.
And the shimmering pixel turns bloated and red as its star engulfs our homeland. And we say, it does not matter, we are eternal. No longer can we feel the teeth that hunt us under a bright moon.
But still we run, like insects from disturbed grass. Flocking from one life-giving heat source to another, until they are all cold and gone. Death has not left us. She is still at our heels, waiting for us to falter, waiting for us to grow cold.
Eventually the whole universe will be hers. | 4 | Short explanation... |
Answer: It was the day of Judgement, and the little town was found wanting.
Lava inexorably flowed down the volcano's rocky slope, a maelstrom of red and orange that could not be stopped. Everyone stared in wonder, and they knew in their hearts it was only a matter of time before the little town was completely engulfed. The first home to be swept away was a two story Colonial with blue shutters, painstakingly crafted. It was not just a mere house; it was a home. But lava does | It was the day of Judgement, and the little town was found wanting.
Lava inexorably flowed down the volcano's rocky slope, a maelstrom of red and orange that could not be stopped. Everyone stared in wonder, and they knew in their hearts it was only a matter of time before the little town was completely engulfed. The first home to be swept away was a two story Colonial with blue shutters, painstakingly crafted. It was not just a mere house; it was a home. But lava does not care who you are and what you love. It's only concern is the conquest, and soon the house was no more, an ashen relic of a more stable time.
One by one, the houses of the little town were systematically eradicated, and it was inevitable that they would never be rebuilt. Distant onlookers gazed at destruction with rapt interest, not lifting a finger to help. They were not here to do mercy's work, and there was even a smattering of applause as the town became no more. There were no screams, no cries for help, no frantic pleas to God.
Ms. Hayworth told me it was the best model volcano she'd ever seen. | 4 | Short explanation... |
> I have a problem with my sword. It is a great sword, but I have a problem with the hilt. The hilt is too big. It is too big for my hands. It is too big for my sword. I cannot use my sword with this hilt. I am having trouble finding a hilt that is not too big. Can you help me? | First of all I’d like to start by saying I ordered a cheap sword that was only supposed to look shiny so I could have a play sword fight with my son. Instead I accidentally chopped his sword in half and took one of his fingers with it. Along with him losing that finger I’ve now lost custody of my children. Thanks, assholes.
Secondly I now have the voice of God in my head and he won’t stop screaming. The only words he’s said to me are “It’s been far too long since I last checked in on my subjects. Let’s see how everything’s go-” and since then there’s been non-stop screaming which has kept me from sleeping for a week. On top of that I also am being told by the voices of angels that I need to “cleanse the world” of sinners. Specifically they keep telling me to go after some “Jack Paulers” and, after googling that, I don’t feel so bad about cutting off my son’s finger seeing as many parents have done much, much worse for their children.
Third and finally my biggest complaint of all; this sword is just too big. Honestly I think I’ll get used to the screaming of God and the angels can go shove a holy sword up their ass and somebody else can take care of all the Florida Men but this sword is bigger than the one I ordered. See I’d already ordered a cool holder for the sword so I could hang it on my wall when I wasn’t using it but the sword is too big and it doesn’t fit.
I wouldn’t suggest this product to anybody interested, it’ll make you lose your children, your privacy, your sanity, and any hope for humanity. 0/5
Sincerely, CrocsNSocks113. | 4 | Short explanation... |
George shot up in bed like a bolt of lightning. At long last he knew how to end his series. He excitedly explained to the young prostitute he had purchased at the Lord Baelish's pleasure house.
"Oh me, Lord.... you are such a clever man" she twirled a lock of her golden hair and looked at the large and sweet man with a curious look in her eyes
George stood up and pulled up his robe and carefully fashioned the turtle emblem to the front of his black attire."I don't know... it just came to me all of a sudden... I have the best ideas when I'm half asl-" The small yet quick handed girl had opened his throat and he fell face first into the Dornish sausage and spoiled a goblet of his favorite summer wine.....A sweet bread roll also fell to the ground. She headed to his room in the Red Keep to complete his story for him. | 4 | Short explanation... |
|
Answer:
Question: | If you would prefer to avoid intermediate image files, the commands provided by LordNeckBeard can be piped between ```ffmpeg``` and ImageMagick's ```convert``` so that no intermediate files are required:
```ffmpeg -i input.flv -vf scale=320:-1 -r 10 -f image2pipe -vcodec ppm - | convert -delay 10 -loop 0 - output.gif
```
The ```-f image2pipe``` tells ffmpeg to split the video into images and make it suitable to be piped out, and ```-vcodec ppm``` specifies the output format to be ppm (for some reason if the format is png, either ```convert``` does not read all the images from the pipe, or ffmpeg does not output them all). The ```-``` for both commands specifies that a pipe will be used for output and input respectively.
To optimize the result without saving a file, you can pipe the output from ```convert``` to a second ```convert``` command:
```ffmpeg -i input.flv -vf scale=320:-1 -r 10 -f image2pipe -vcodec ppm - | convert -delay 10 -loop 0 - gif:- | convert -layers Optimize - output.gif
```
The ```gif:-``` tells ```convert``` to pipe its output as gif formatted data and ```-layers Optimize``` tells the second ```convert``` to perform ```optimize-frame``` and ```optimize-transparancy``` methods (see the ImageMagick Introduction to Animation Optimization). Note that the output from the ```-layers Optimize``` may not always provide a smaller file size, so you may want to try converting to a gif without optimization first to be sure.
Remember that during this whole process everything is in memory so you may need sufficient memory if the images are quite large. | 4 | Short explanation... |
I have a switch that is connected to a router and a computer. I have another switch connected to the same router and the same computer. I have a cable running from the first switch to the second switch. I have another cable running from the second switch to the computer. I have a cable running from the computer to the router. The computer is connected to the router via a cable. The computer is connected to the switch via a cable. The router is connected to the switch via a cable. The router is connected to the second switch via a cable. The second switch is connected | It depends on the router/switch.
If it's "Managed" - Like decent Netgear, Cisco or HP Procurve, or has STP (Spanning Tree Protocol) or one of its variants enabled, there's a few seconds of absolute insanity, then the switch realises that there's a loop in the network topology, and blocks one of the ports.
(I've only described the STP re-convergence as "absolute insanity" because if you're using old-style, slow, STP then re-convergence can take 30s or more, depending on network complexity. Vendor specific STP extensions such as BackboneFast and so on will decrease this, but you might still end up with a short period of a slightly unstable network. Rapid STP is a lot quicker to converge, due to a different algorithm)
If it's "Unmanaged"- Like pretty much all SOHO grade gear, and a fair proportion of small 4-8 port switches, then all hell breaks loose, as you've just created a loop in a network, and all the traffic tends to just bounce about inside the loop.
The reason this happens is because switches rely on a process of MAC address learning to map MAC addresses to physical ports. In a non-looped network, one MAC address will only be visible to the switch on a given physical port. If you have a loop, then the switch will see multiple paths to the same MAC address, and possibly multiple MAC addresses on multiple ports, so instead of the traffic being switched efficiently, it will be broadcast to wherever it sees the MACs. This is known as a "Broadcast Storm".
This can quickly use up all of a switch's CPU power, fill the transmit and receive buffers, as well as polluting the MAC address table.
Basically, if you create a loop in the network, you'll know about it, either through monitoring (detecting a change in the STP topology [you do have monitoring, right?]), or in everything falling over dramatically.
If you look at a switch that has a broadcast storm on it, you tend to find that all of the port activity lights are blinking all at the same time. | 4 | Short explanation... |
The following is a paragraph:
<p>
This paragraph is the first paragraph of the second section of the main body.
</p>
The following is a paragraph:
<p>
This paragraph is the second paragraph of the second section of the main body.
</p>
The following is a paragraph:
<p>
This paragraph is the third paragraph of the second section of the main body.
</p>
The following is a paragraph: | Here is a title for this paragraph:
Development and evaluation of an efficient 3-noncoding region-based SARS coronavirus (SARS-CoV) RT-PCR assay for detection of SARS-CoV. | 4 | Short explanation... |
Why do people say the food is good at this party? | Want some Halloween food ideas? Well then look at this article.
## Step
1. Make Vampire punch. Your guests may be thirsty so here's the perfect drink: Vampire Blood Fruit Punch. All you have to do is buy/make some red fruit punch.
2. Serve bone crunch sandwiches. Put some salad on some white bread and add tomatoes and more. You choose!
3. Serve spider leg trail mix. Add some M&M's, Pretzel sticks, etc. in a bowl and there you go. Simple, easy and good.
4. Make some monster toes. Make the mini hot dogs, and then carve out a toenail area on the hot dog. Then dab ketchup on the "toenail".
5. Have some blind tasting. Serve the guests regular food, but tell gross stories, describing some disgusting objects with the same texture as the food.
6. Serve uncut blood oranges in water with red food coloring!
7. Make dirt- get a large bowl or clean flower pot and put some chocolate pudding in. Mix in crushed Oreos and gummy worms.
## Make dirt cake
1. Make Brownies. For best results, make them as gooey as possible.
2. Find chocolate accessories. Pour chocolate syrup on the finished brownies, then sprinkle them with coco powder. You could also consider adding little bits of a chocolate bar.
3. Add creepy crawlies. Put gummy worms and other gummy critters on top of and around the cake. Cover some of them with coco powder to make it look like they're coming out of the dirt.
4. Add flesh and guts. Melt red starburst, jolly rancher chews, and tootsie rolls. Then, tear them into chunks and spread them around certain parts of the cake. To make them look even more real, you can add them to the creepy crawlies from the previous step.
| 4 | Short explanation... |
Answer:
The FBI didn’t know that the original publisher was the hacker.
They only found out when the hacker sent an email to the FBI, which the FBI found in his sent items.
The FBI then sent an email to the hacker, which he replied to.
The FBI then arrested him.
Question: | He titled his first two works “Rough Draft”.
This time he called it “Completed Draft”.
He let his friend in on the plan when they met up face-to-face.
Firstly, he sent her fake text messages outlining how this time he was "very confident" he knew how to keep his works safe on his PC from ‘hackers’.
He sent a text stating that he would create a handwritten draft that would be fully edited, which he would then type up on his computer in a few hours on the 25th of May and publish quickly within 24 hours.
It was a win-win situation.
He knew that if the hacker wasn't watching his texts, he would be able to publish his novel.
But if they were, they'd be caught out.
His completed draft was stolen on 25th of May and self-published to Amazon before he had the chance to do so himself.
He erased all traces of the draft on his computer.
Just to make sure, the hard-drive was destroyed as well.
He knew the cyber thief wouldn’t be able to completely check and edit the story within the short timeframe.
So, on page 198 of his light-hearted fantasy novel, he decided to abruptly interrupt the story to detail “intelligence leaks and tips” in Arabic to “potential terrorists” from a “professional criminal hacker/high-level government employee”, (his two best guesses as to who had repeatedly hacked his computer).
He sent an anonymous tip to the FBI.
They decided to check if the original publisher really was a high-level government employee. | 4 | Short explanation... |
The young man was walking by the street when he stepped on a small, thin, white book. He looked at it, kneeling down to pick it up. The man analyzed it left to right. It looked familiar, like one of those Anime's he watched, except the wording was different. It said life instead of death, which was weird.
The man thought nothing of it, simply taking oht a pen from his shirt pocket and writing the first name to come to mind. Of course the first president was the first name. He wasn't very creative, so he slopp | The young man was walking by the street when he stepped on a small, thin, white book. He looked at it, kneeling down to pick it up. The man analyzed it left to right. It looked familiar, like one of those Anime's he watched, except the wording was different. It said life instead of death, which was weird.
The man thought nothing of it, simply taking oht a pen from his shirt pocket and writing the first name to come to mind. Of course the first president was the first name. He wasn't very creative, so he sloppily wrote it down, throwing the notebook down afterwards and walking off.
The next day, he was making breakfast, looking at the tiny tv sitting in the kitchen until he heard something he never thought he'd hear from a news source.
"George Washington is alive? Is it an imposter? He seems to be very serious about it."
The mans jaw gaped open, seeing pictures of the man in the modern era.
"Guess he'll have to survive this." | 4 | Short explanation... |
## Find your screws
The best way to find a screw is to use a magnet.
## Magnet Method
Take a powerful magnet (like a bar magnet, hardware stores - fridge magnets might work) and run it over the surface where you think the screw is. You should find it. If that still fails...
## Vacuum Method
Take a good vacuum cleaner. Put a sock over the extending arm, and run it over where you think the screw is. The sock will prevent the screw from being vacuumed up, but it will | This is why you should always have spare screws on hand. Fortunately, there is a way:
## Light Method
Most screws are silver. Shine a flashlight into the carpet and look for little silvery glints. This may take some time, but you'll probably find it. If your carpet is unnaturally thick...
## Magnet Method
Take a powerful magnet (like a bar magnet, hardware stores - fridge magnets might work) and run it over the surface where you think the screw is. You should find it. If that still fails...
## Vacuum Method
Take a good vacuum cleaner. Put a sock over the extending arm, and run it over where you think the screw is. The sock will prevent the screw from being vacuumed up, but it will be stuck to the sock. There will still be enough suction to pick up the screw, even with the sock. If not, get a new vacuum! If that fails...
## Organize your screws
There are many useful tools to organize screws. Go to your local RadioShack and get one, or make one out of a magnet for that awesome lifehack feel.
## Stop using carpet!
[Not a "find your screws" method - a tip about not frying your computer]
Carpet can cause static discharge, which is very very very bad for a computer (personal experience). Work on a hard floor with an antistatic strap to reduce the chance of frying your PC. | 4 | Short explanation... |
How can I train my crew to be more effective in combat? | ###Piloting
A crew member who is controlling a helm gains one point of experience for each incoming projectile that is dodged during combat. This includes asteroids, so long as you are in combat at the time. (Note that the dodges do not count while you ship is under the effects of +60% evasion from a cloak.)
This can be explicitly trained by finding an enemy that cannot break through your shields, and letting him fire at you. Increasing your dodge chance (i.e. more power to engines) will help this occur quicker, but even with the default chance you can max out the skill eventually.
###Engines
Exactly as for piloting, a crew member manning the engines gains one point of XP for each projectile evaded while uncloaked in combat - and so it can be trained in the same way.
###Weapons
A crew member who is manning the weapons station gains one point of experience for each weapon that is fired. It doesn't matter whether it hits or misses, or whether it can do damage (e.g. a beam weapon fired at a shield).
(Multi-shot weapons such as burst lasers still count as a single fire order and hence a single XP.)
This can be trained by firing non-lethal weapons (e.g. ones that do ion damage) repeatedly against a target that cannot damage you.
###Shields
A crew member manning the shields station gains one point of experience for each shield "bubble" that is brought back up during combat. It doesn't matter why the shields were down, be that direct enemy fire, ion damage, asteroid strikes, or even manually removing and then restoring power to the shield systems.
This can be trained by letting a target that cannot break through all of your shields repeatedly take one layer down. (For fastest results, move your pilot away from the helm, or reduce your engines to 0 power. This will reduce your dodge chance to 0%, ensuring that everything hits your shields.)
Note that you used to be able to manually remove power and restore it in combat, to get points, but this has been patched.
###Repair
A crew member gains one point of experience for getting the "finishing blow" when repairing a (sub)system. Note that hull breaches provide no repair experience.
There's no specific way to train this as it requires your systems to be damaged. Though you can focus the XP gains by always having the same person run around and repair everything after a battle.
###Combat
A crew member gains one point of experience for getting the finishing blow when fighting an enemy crew member or (sub)system.
This generally gets trained in "real" situations. However, since XP is gained for taking out systems, a few extra XP can be gained from boarding if one tries to take out the enemy's systems before the crew. | 4 | Short explanation... |
Answer: Learning a foreign language is an important skill that can open up countless opportunities and experiences. Whether for travel, work, or personal growth, knowing how to speak a second or third language is a valuable asset in today’s increasingly globalized world. While it may sometimes seem like a daunting undertaking, there are several key strategies that can help make learning a new language easier and more effective.
One of the first steps in learning a foreign language is to set a goal. This could be something as simple as learning a few key phrases before a trip abroad or something more long term | Learning a foreign language is an important skill that can open up countless opportunities and experiences. Whether for travel, work, or personal growth, knowing how to speak a second or third language is a valuable asset in today’s increasingly globalized world. While it may sometimes seem like a daunting undertaking, there are several key strategies that can help make learning a new language easier and more effective.
One of the first steps in learning a foreign language is to set a goal. This could be something as simple as learning a few key phrases before a trip abroad or something more long term, such as achieving fluency in a language for work or personal reasons. Setting a goal provides a clear endpoint and motivation to keep going.
Once a goal has been established, it’s important to create a structured learning plan. This can include setting aside dedicated study time each day or week, focusing on specific aspects of the language (such as grammar or vocabulary), and setting measurable benchmarks to track progress. A learning plan keeps things organized and ensures that steady progress is being made toward the ultimate goal.
Immersion is one of the best ways to learn a foreign language quickly and effectively. This can involve watching movies without subtitles, reading books in the target language, listening to podcasts, or even taking a trip to a foreign country. Immersive learning helps build confidence speaking the language and exposes learners to new words and concepts in a natural way.
Practicing regularly is essential when learning a foreign language. This can take many forms, including talking to native speakers, practicing with flashcards, using online programs, or simply thinking in the target language. Practice reinforces what has already been learned and helps develop new skills. It also builds confidence, which is crucial for improving language ability.
It’s important to remember that learning a foreign language takes time and practice. Don’t get discouraged if progress seems slow - every little bit counts! With dedication and perseverance, anyone can become multilingual. | 4 | Short explanation... |
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question:
Question: | Humanity has yet to find evidence for life outside planet Earth.
The current search for extraterrestrial life is largely focused on finding planets that are situated in an "habitable zone". Roughly put, a planet is in a habitable zone if its distance from nearby stars allows for liquid water to persist on its surface.
So far, a few such planets have been found, but none yet with liquid water on its surface. | 4 | Short explanation... |
What is the difference between a "Saturn V" and a "Saturn V" in terms of the vehicle's capabilities? | First stages are generally run to depletion (though not complete depletion). First stage ascents often use a preprogrammed, open loop guidance system to get out of the atmosphere with a good chunk of downrange velocity. Because winds aloft and other factors may vary, first stage performance also varies somewhat.
Upper stage guidance is almost always closed loop, targeting a specific position and velocity combination. As a result, upper stages of boosters are shut down when that target is reached, with some amount of reserve propellants left to cover dispersions during ascent and a disposal burn.
Liquid fueled first stages are not run dry. Cutoff is triggered with some amount left in the tank. This is because the turbopumps operate at ridiculous velocities and need something to pump, at a specific inlet pressure. The heat source (gas generator, expander, or preburner) that drives the pump is downstream of the inlet in the flow path, so cutoff has to happen by cutting off the drive force to the pump before the inlet loses pressure or runs dry.
If that pressure drops below minimum specifications or if the inlet goes dry, you will get cavitation and/or overspeed conditions, both of which would result in a violent reconfiguration of the hardware.
Solid lower stages are much simpler in this regard. At some point, the thrust will tail off until the booster no longer supports its own weight. At that point, it is jettisoned. | 4 | Short explanation... |
1. What is the best way to write a letter to someone?
2. What is the best way to write a letter to someone?
3. What is the best way to write a letter to someone?
4. What is the best way to write a letter to someone?
5. What is the best way to write a letter to someone?
6. What is the best way to write a letter to someone?
7. What is the best way to write a letter to someone?
8. What is the best way to write a letter to someone? | Dear [Name],
I just wanted to say that you are one of the nicest, funniest, and empathetic persons in the world. Most importantly, you are my best friend and I am truly grateful to have met you. Anyways Moon of My Life, if you have anything you want to talk about, say if you are unsure about the marriage or whatever, I'm always here. Eric is a good man and a very lucky one. One cannot easily seduce the mother of dragons. I guess what I'm trying to say is, you're like a sister to me and you can count on me for anything.
Also, what flowers did you want for the wedding again? I'm pretty sure my shop can get them to you cheap, haha just kidding, I don't want to wake the dragon, they will be free. Just give me a text or something telling me what you want. Come to think of it, why didn't I just text this to you? Oh well, I've already written so much, sorry you'll have to read this on a piece of paper rather than on your phone.
Sincerely,
Your Sun and Stars [Your Name]
P.S. Our annual cream of ice adventure is tomorrow! | 4 | Short explanation... |
Answer:
* Keeping your thermostat at a higher temperature will save energy.
* If you can, install a programmable thermostat.
* Consider installing a new HVAC system.
* Insulate your water heater.
* Insulate your hot water pipes.
* Insulate your hot water tank.
* Close the doors in your apartment when the heat is on.
* Lower the thermostat on your hot water heater.
* Lower the thermostat on your HVAC system.
* Close the doors in your apartment | There are a lot of little things you can do that can add up. Here are some suggestions:
* Wash clothes in cold water only.
* Turn your freezer/refrigerator up a few degrees.
* Purchase insulated curtains/shades, and close them during the day when you are at work.
* Make sure your furniture is arranged so that it is not blocking any vents or radiators.
* Purchase a draft guard to place at the bottom of your door leading to the outside where temperature-controlled air can escape from your apartment.
* Install a low flow shower water head. Shower head screw on/off easily. Keep the old head to replace when/if you move.
* Clean Your Refrigerator: It's unlikely that you'll purchase new energy efficient appliances for your rental, but you can tweak the ones you already have. For example, by cleaning the coils on the back of your fridge you'll help one of the biggest energy hogging appliances run more efficiently.
* Use Energy Efficient Bulbs, even if you're put off by the slightly higher upfront cost, you can simply unscrew them and take them with you when it's time to move.
* Use Power Strips: A lot of energy is wasted through electronics left plugged in, and the resulting vampire energy. Put a stop to it by using one of a number of cool, smart energy strips, which will turn off vampire energy when the electronics are not in use.
* Use a Humidifier & Lower Your Heat: Keeping humidity levels up during the winter is not only good for your health, but also for your air and furniture. It also helps keep the ambient air temperature feeling warmer than dry air, which means you can turn your thermostat down. If your HVAC system doesn't have a humidifier built-in, then you can get an inexpensive and portable humidifier to use during dry conditions. | 4 | Short explanation... |
Answer:
If you want to help a homeless person, you can do so by offering to buy them a meal or by giving them money. If you feel comfortable, you can also give them a hug.
### Tips for helping homeless people
1. Ask the homeless person if they would like a hug. If you feel comfortable, you can ask the homeless person if they would like a hug. Hugging the person may make them feel more comfortable and less alone. It can also be a sign of empathy and caring for them | Homelessness can feel like a daunting problem, especially as the population grows and living costs continue to rise. Helping to end homelessness will ensure no one has to go without a permanent, stable place to live. Give back to homeless organizations and participate in events that focus on ending homelessness. Advocating for changes to policies and laws around homelessness and treating homeless people with respect can also help to address this important issue.
## Support homeless organizations and group
1. Volunteer your time to a local homeless shelter. Start small by volunteering weekly or monthly at a homeless shelter in your area. Sign up to volunteer to serve food to the homeless or to create care packages for the homeless. You may challenge yourself to volunteer for 2-4 hours a week or twice a month. Or you may devote time during the holidays to work at a homeless shelter. Enlist friends or family to volunteer with you at a homeless shelter.
2. Donate your skills to a non-profit organization that focuses on homelessness. Search for non-profit groups and organizations that work on initiatives for ending homelessness in your area. Contact them and offer to help them in any way you can. Put skills you already have to good use by donating them to the organization. For example, if you have coding skills, you may offer to update the organization’s website. Or if you love talking to people, you may offer to work in a call center or go door to door to promote the non-profit organization.
3. Give monetary donations to homeless groups and organizations. Donating money to homeless organizations can go a long way to helping with this issue. You may give a large sum once a year to a specific program for the homeless or to the organization as whole. Regular giving, where you give a small amount once weekly or once a month, can also help. Donate to a homeless organization as a gift for a friend or in memory of someone close to you. Make a holiday donation to the organization as a way to give back. Raise money for these organizations by setting up a fundraiser online for them or by asking others for donations.
4. Go to fundraisers for homeless organizations. Show your support for ending homelessness by attending fundraisers and events that address the issue. Check your local community board for events to raise funds for a local homeless shelter or drop in center. Find out if there are fundraisers in your area that you can donate time or money to. Donate an item for a silent auction at an event for the homeless. Bid on items to help raise money for the issue. Invite friends and family to fundraisers to benefit the homeless so they can participate as well.
5. Participate in food and clothing drives for the homeless. Donate clothing or food for the drive. Volunteer to collect food and clothing for the drive. Promote the food and clothing drive on social media to get others to donate. Warm coats, socks, scarves, and hats are all good options for a clothing drive. Non-perishable food like canned goods, crackers, and granola bars are ideal donations for a food drive. Most communities will run annual food and clothing drives, especially around Christmas time when the weather is cold and homeless people need more support. Check your community board or at your community center for information on upcoming food or clothing drives. Your school or your church may also run a food and clothing drive for the homeless.
## Advocate for homeless policies and laws
1. Write or call your government representative about ending homelessness. Many long term solutions for homelessness require changes to existing policies and laws. Contact your representative in government and ask them what they are doing to help end homelessness. Remind them that homelessness is an important issue that their constituents care about and want to address. Search online for contact information for your government representative. Calling them directly will be more effective than writing a letter. Messaging them publicly on social media can also be effective. For example, you may write to your mayor or you may contact your senator. You can also reach out to city council members to find out how they plan to address the issue. In your letter or call, advocate for more investment in affordable housing and social services to help prevent homelessness. Discuss the need for services that help homeless people find permanent homes and stay off the street. Note the need for counseling and rehabilitation centers for homeless people with addiction issues so they can get better and find employment.
2. Support political candidates that care about ending homelessness. Put your right to vote to work by only supporting candidates who discuss ending homelessness in their platforms and during their campaigns. Promote them on social media and volunteer for their campaign. Cast your vote for them on election day. Tell friends and family about political candidates who discuss ending homelessness so they can stay informed and vote.
3. Organize a march or protest that focuses on support for the homeless. Let others know about this important issue by organizing a march or a peaceful protest that focuses on ending homelessness. Invite friends, family members, and colleagues to the march. Promote the march or protest on social media so others can participate. Make signs that note the importance of ending homelessness and bring them to the march. Use a megaphone at the protest to give speeches about the issue. Have the march or protest in a public space, such as in front of a government building or in a public square.
4. Work towards a career as a politician, lobbyist, or non-profit worker. Do well in your social studies and history classes in high school. Join a school debate team or public speaking club to get better at these skills. Take classes in political science, history, and conflict resolution in university. Get involved in local politics and non-profit organizations. Apply to positions as a lobbyist or a non-profit worker so you can work to actively end homelessness on a day to day basis. Run for local office with a platform that focuses on ending homelessness in your community.
## Treat homeless people with respect
1. Acknowledge the homeless person with a smile or nod. Rather than rushing by them without looking at them, make eye contact and smile or nod at them. Let them know that you see them and acknowledge them as a person. This is a small way for you to show empathy for them. Avoid yelling, shouting, or mocking the homeless person, as this will only make them feel more alienated and alone. Treat them like a friend or family member, showing care and respect for them.
2. Try starting a conversation with the homeless person. Ask them how they are doing. Find out where they are from. Keep the conversation open and friendly. Maintain eye contact when you talk to them so they know you care. For example, you may say, “How are you today?” or “Where are you from originally?”
* If the homeless person does not seem interested in answering your questions, don’t pressure them into answering. Let them decide if they want to engage with you on a deeper level.
3. Offer to buy the homeless person a meal. If you have the time and funds, offer to grab the person a cup of coffee or a sandwich from somewhere nearby. Getting the person a warm meal may make their day and help them feel less down about their situation. The meal does not have to be elaborate or expensive. A cup of coffee or a small snack would likely be appreciated by the person.
4. Give the homeless person a care package. Prepare a care package that contains important items like socks, warm gloves, toothpaste, lip balm, and non-perishable food like crackers or nuts. Give out the care packages to homeless people in your area so they have supplies that they need. Make it a habit to hand out care packages to homeless people once a month or regularly during the winter months.
5. Decide to give the person money if you feel comfortable. Giving money to a homeless person is a personal preference and completely up to you. Handing change or a few bucks to a homeless person can be a demonstration of empathy and help them in a very direct way. You may decide to give the person a meal, rather than money. Or you may sometimes give the person money and offer them food other times.
| 4 | Short explanation... |
1. 排斥感
2. 怨恨
3. 疑惑
4. 冷漠 | The author's girl friend won't hang out with the author, but would like to hang out with her friends. She's going through a lot of stress. The author feels that relationship is one-sided. | 4 | Short explanation... |
## Play the concentration game
1. Create game pieces. Make small cards using paper or something sturdier such as cardstock. Cut small squares out and be sure to make each piece the same size. Since this is a memory game, it is important that each card looks the same so you are unable to differentiate one card from the next.
2. Write out information on game pieces. Work in pairs when writing out your review information on these cards. Write down a vocabulary word on the first card in the pair and its definition on the second. Continue writing on your cards until each review item has been covered. This game words best when reviewing things like definitions, spelling, examples, etc.
3. Organize your cards. Flip over all your cards so that the writing is underneath. Place your cards face down and organize them into rows and columns until every game piece is situated.
4. Flip over one card. Begin the game by choosing just one card to turn over. Read the definition or vocabulary word and choose one more card to turn over. If you flipped over the correct card, you should have a pair in which both cards are a match. When first starting out, this game is sheer luck, but after a few tries you will be able to remember where each card lies and can do your best to find its correct match.
5. Set aside pairs. When you have found two cards that are a match, set that pair aside so that your game board becomes smaller. Continue playing until every card has been turned over and you have created matches for each game piece. When you are finished playing, you can simply shuffle your cards and redistribute them to create your game board and play again.
## Play with card
1. Obtain a deck of cards. The first thing you need to do is get an entire deck of cards. Be sure you aren’t missing any because it will affect how you play the game.
2. Create a list of review items. Using your study materials, create a list of items you want to review. This list must be numbered and can be anything from definitions to vocabulary.
3. Pull out face cards from your deck. You want to eliminate any face cards from your deck because the only cards needed are those with numbers. You may set the face cards aside until you have finished playing. An alternative to pulling out face cards is using them to play the game. Treat these cards like wild cards and whenever you draw one you can choose to review any item from your list that you wish to review.
4. Shuffle your cards. It is very important to shuffle your deck. By doing this, you will ensure that each review item gets chosen by mixing up the numbers within the deck.
5. Draw cards. Place your cards in a pile after shuffling them and draw the first card off the top. You may set aside all the cards you have already drawn.
6. Review information corresponding to the number on each card. Look at the number on the card you drew and find the corresponding number on your list of review items. Review the information for that particular number. Continue to draw cards and review the information corresponding to those cards until you have gone through the entire deck.
## Play a guess game
1. Create a list of questions. Before generating a list of game questions, you must first go through all of your study materials and review critical information. While reviewing, form questions and produce a list.
2. Cut small pieces of paper. Once your list is created you are ready to craft several pieces of small paper. These pieces of paper will serve as the main game pieces. Use card stock or heavy-duty paper for sturdy game pieces. Use sticky notes as another option to quickly create piece.
3. Number papers. You created your main game pieces so now you must number them according to how many questions you developed.
4. Put papers in container. Place all of your numbered game pieces into the container and be careful not to forget any. Be sure to shake the container once you’ve put all your game pieces inside to ensure the pieces are mixed sufficiently.
5. Draw paper from container. Keep your list of questions next to you as you pull pieces out of the container. Choose randomly from the container and read the number on the piece of paper.
6. Answer corresponding questions. Find the number on your question list that corresponds to the number on your game piece and read that question.
7. Set aside used pieces. After answering each question, put the used game pieces aside so as not to repeat any. If you are unable to recall the correct answers to any questions you can make two piles designating one for challenging questions and one for easy questions. When you play the game for again, you can just put the challenging questions inside the container and spend less time reviewing the questions you already know.
8. Repeat steps until container is empty. Continue draw the papers from the container until you’ve used them all. To play again, simply fill up the container and start over.
| 4 | Short explanation... |
|
Answer: | Most people have heard of Down syndrome. But there are hundreds of other chromosome disorders a child can have, many of which are diagnosed in only a few children, or may even be unique to that child.
## Get information
1. Learn about genetics. Most people have 46 chromosomes, arranged in 23 pairs. One pair is the sex chromosomes, which in males is usually XY and in females XX. The other 22 pairs, known as autosomes, are numbered by size, with chromosome 1 being the biggest. Each chromosome has a longer arm, called the q arm, and a shorter arm, called the p arm. Each arm has bands that are numbered, with the band closest to the middle (centromere) being numbered 11.1. Terminus (shortened to "ter") refers to a tip of a chromosome. A "terminal" chromosome disorder is not fatal; it just involves the terminus. Learn about the types of changes. Nullisomy means that there are zero copies of a chromosome. Deletion/monosomy means that there is only one copy of the chromosome or piece of chromosome. Duplication/trisomy means that there are 3 copies. Tetrasomy and pentasomy refer to 4 and 5 copies, respectively. Translocations are when chromosomes swap material. If it is balanced, this means the same number of copies of material is present, but they are arranged differently - for example they have part of 3q on 2q and part of 2q on 3q, but it all adds up to the same thing. If it is unbalanced, the child has trisomy and/or monosomy for some part of the involved chromosomes. Very often, an unbalanced translocation is inherited from a parent with a balanced translocation, but it can also occur as a new mutation, which is called 'de novo'. For example, they may have part of 2q missing and part of 3q in its place, causing partial monosomy of 2q and partial trisomy of 3q. In an unbalanced translocation, the abnormal chromosome is called the derivative chromosome, or der for short. So they may write t(2;3)der(2) to indicate the child has the 2 with chromosome 3 material instead of the 3 with chromosome 2 material.
2. Find medical information on your child's condition. There may not be much out there, but find what you can, because it can give you an idea what to expect for your child. Be careful to pay attention to what specific chromosome region is affected, including what bands are involved - even though they both have 22q deletion, kids with 22q11 deletion have a totally different syndrome from 22q13 deletion. Also keep in mind duplication/trisomy versus deletion/monosomy, because these are genetic opposites. When reading medical case studies, remember that they focus on the negative. You're probably not going to hear the doctor talk about how sweet and caring the child is, or how much their parents feel lucky for knowing them, because it's not medically relevant. You will learn about some of the health problems your kid could face.
3. See if parents have written about your child's condition. Depending on how rare the condition is, there may be other parents out there who have written about what it is like to raise a child who has it.
4. Look for adults with your child's condition. Many adults with genetic disabilities are able to use computers when they become adults. Do any of them have blogs or social media accounts? They may be able to offer good advice. Here are some benefits of learning from adults with disabilities:
* They can tell you about the parenting strategies that did and didn't help. They may be able to offer detailed advice about your child. Watching them can help you envision what your child's life will be like someday.
## Cop
1. Don't assume the worst. Many doctors, when they don't know the prognosis for a condition, will act like it's more severe than it really is. Even parents of kids with very mild chromosome disorders have been told their child will never walk or talk and/or will die in infancy. If your child has a rare syndrome, take dire prognoses with a grain of salt.
2. Recognize that infancy is the worst time. For many chromosomal conditions, the first year or two of life are the hardest, as caregivers and healthcare providers try to figure out the child's needs. It won't always be this bad, and it's likely to get easier. If you've been told that your child may die, recognize that extreme early death usually happens in the first 3 years of life, or not at all. If your child is fine at age 4, they'll probably be fine at age 24 and age 44.
3. Give yourself time to process. You may feel a range of emotions as you realize that your child's life will look different than you thought it would. This is normal. Don't expect yourself to adjust immediately.
4. Tell other people how they can support you. People around you may want to help, but not know what they can do. Let them know what your family needs, and give them the opportunity to help. "Between all the doctor appointments, we barely have time to cook. It would be really nice to have someone prepare a meal or maybe invite us for dinner once in a while." "We could really use a babysitter on weekends." "We're so busy for with the baby that the kids can feel left out. If they could go to your house to play with your kids sometimes, it might help cheer them up." "I'm really worried about the upcoming surgery. My wife can't be there due to her conference. It would really help to have someone there with me."
5. Make peace with the fact that life will be different. Your child is going to learn differently, behave differently, and show you how much they love you differently. Sometimes it will be harder, but there will also be beautiful parts. Remember that not every quirk is a deficit. Some differences are positives, and others are neither good nor bad. It's okay for your child to be unique.
6. Take time for yourself. You can't pour from an empty cup, and you can't help your child much if you're physically and emotionally exhausted. Try to set aside a little "me time" each day, even if it's only 5 minutes. Ask yourself "What would help me feel better right now?" Could it be a shower? A cup of tea? A hug? Try to get it.
## Move forward
1. Seek out parent support groups. If you can find other parents of kids with the same or overlapping chromosome disorders, great, but even parents of kids with completely different conditions can be a great source of support. UNIQUE has leaflets on many rare conditions.
2. Get therapy early. Early intervention is important. As soon as your child is medically stable, sign them up for physical, occupational and/or speech therapy - even if they are still a tiny baby. This will help them reach their full potential. Although very few kids with chromosome disorders are so affected that they can't walk or talk, most have some degree of cognitive or learning disability. The more they can do for themselves, the less support they will need from others in adulthood. Take notes during therapy and ask for activities that you can do at home. Bad therapists do exist. If a therapist tells you to be cruel or punitive towards your child, find a new therapist. Childhood should be fun, not scary. You don't want your child to gain an anxiety disorder along with their new skills.
3. Make time for your child's siblings, if there are any. At times, they may feel left out, especially if you're busy taking care of your disabled child's needs. Try to spend quality time with each of your children every day. If you don't spend time with a child on one day, try to make up for it during the weekend.
4. Celebrate your child! Your child is different, and they have their own special combination of traits that make them who they are. Love them for who they are, and treasure the good moments. Some conditions, such as Williams syndrome, include positive aspects. Let go of the idea of the child you could have had, and focus on the real child you have right now. They need your love.
| 4 | Short explanation... |
Answer: You finish writing the incantation down, and look back through your notes, double and triple checking your work. This hacked spell is going to be your first step on the road to fame and fortune. The first step for people to realize you're not just some worthless drone, but a spell-writing genius. The ink drys on the page as you practice all the movements and phrases you'll need to cast the spell, your spell, the one that will be the first step on your road to greatness.
You start the incantation and quickly and confidently make | You finish writing the incantation down, and look back through your notes, double and triple checking your work. This hacked spell is going to be your first step on the road to fame and fortune. The first step for people to realize you're not just some worthless drone, but a spell-writing genius. The ink drys on the page as you practice all the movements and phrases you'll need to cast the spell, your spell, the one that will be the first step on your road to greatness.
You start the incantation and quickly and confidently make your way through it. The spell rolls out of you drawing power from the aether into the form you're devising. It's beautiful to you, but only spell-writers would understamd that, people will want it because it's just plain better.
You're nearing the end when you notice that something is wrong. Part of the spell has jumped ahead and now it's pulling you back. You're in a recursion. You keep pulling more and more energy from the aether. Slowly you begin to feel warm, then you feel hot, fortunately by the time you start to burn from the inside out you explode in a release of roaring flame and you feel nothing ever again.
The watermages put out the inferno you started in your house, it's nothing but smoldering rubble by the time they get it under control. Later a Diviner Investigator will gather clues and come to the conclusion that the fire was your fault. He'll eventually fall prey to the same inclination as you. The most dangerous spell, one that has destroyed so many, the summoning of the perfect donut. | 4 | Short explanation... |
What is the difference between a list and a tuple? | Python provides two ways to sort a list, the built-in list method `list.sort()` and the built-in function `sorted()`.
The primary difference between the two is that list.sort() will sort the list in-place, mutating its indexes and returning None, whereas sorted() will return a new sorted list leaving the original list unchanged. Another difference is that sorted() accepts any iterable while list.sort() is a method of the list class and can only be used with lists.
Here is an example of using `list.sort()`:
```
# the list to be sorted
x = [2, 3, 1, 5, 6, 4, 8]
# sort by list.sort()
x.sort()
print(x)
```
The output of the above code is
```
[1, 2, 3, 4, 5, 6, 7, 8]
```
Equivalently, you can use `sorted()`:
```
sorted_x = sorted(x)
``` | 4 | Short explanation... |
What are the best ways to improve handwriting? | Handedness is a very interesting phenomenon, but it is not as simple as being either left or right handed.
In most people the brain is asymmetrical, with some functions, such as language, being localised to one hemisphere. In most people this is the left hemisphere, which leads to these people being right handed as they use their dominant hand to perform tasks involving fine motor control, such as writing. Left handed people have their language centres in the right hemisphere, and while they may perform other tasks with their left hand they can often do tasks involving fine motor control with either hand.
There are also people who are truly ambidextrous, capable of performing tasks with either hand equally well. These people, while rare, do not have brains that are symmetrical, but have developed connections between the two hemispheres that allow them to access both motor cortices.
The genetics of handedness are complex and not well understood. There does appear to be a genetic component, but it is not straightforward. Identical twins who are brought up in the same environment are not always both left or right handed, suggesting that environmental factors also play a role.
One of the most interesting things about handedness is how early it becomes apparent. Children as young as two years old can be assessed for handedness, and it is very rare for a child's handedness to change over time. This suggests that it is very strongly influenced by genetics, with environmental factors playing a minor role. | 4 | Short explanation... |
End of preview. Expand
in Data Studio
README.md exists but content is empty.
- Downloads last month
- 11