id
stringlengths 14
15
| text
stringlengths 74
1.13k
| source
stringclasses 29
values |
|---|---|---|
b57cb2a7a8c6-0 | You are here
Prospective Students > International
Welcome to Trinity College Dublin
The School of Engineering is a vibrant, intellectual community of innovative researchers, teachers and students, which combines high-quality teaching with expansive research activity.
Each year, the Engineering School welcomes growing numbers of visiting and full-time students from around the world who enrich our shared multicultural learning environment. We have international students from all over Europe, North and South America, Australia, Asia and Africa.
We strive to educate global citizens who will have a real impact on society and who will enhance engineering throughout the world, by sharing their innovative ideas.
Admissions
Study Abroad | https://www.tcd.ie/Engineering/international/index.php |
d18c119d91c9-0 | You are here
Prospective Students > International > Study Abroad > Outgoing
Outgoing Students
The School of Engineering encourages Senior Sophister students on the MAI track to consider spending their entire year or their second semester abroad at one of our partner Universities. We currently have students studying at a range of distinguished universities around the world including the University of California, University of Sydney, Polytechnique Montreal, UPC Barcelona, KTH Stockholm and ETH Zurich, to name a few. This is a unique opportunity for students to not only enrich their academic education but also to gain invaluable intercultural, language, social and civic skills. Please note that all SS year study abroad options are available only to students doing the 5 year MAI programme (Students study abroad in their 4th year and return to Trinity for their 5th year). | https://www.tcd.ie/Engineering/international/study-abroad/outgoing/index.php |
d18c119d91c9-1 | In Semester 1 of SF and JS years, the Engineering Global Officer gives information sessions with an overview of your range of study abroad options.
2021/2022 Information Session Recording
Outbound Student Handbook
Overview of Options
Non-EU Exchange
Brief Description
Full year or second semester of SS year studying in a partner university in Asia, Australia, New Zealand or North America.
Eligibility
These are college-wide exchanges, so students across the whole university are eligible to apply.
Some partner universities have specific restrictions about disciplines which can apply.
Must get a II.1 (min. 60%) in JS results in the first sitting of the examinations.
Available Funding
No grants available for most universities.
Often a travel bursary is available for students going to Asian universities. (up to €1,000 reimbursable for travel costs)
For more information on Non-EU Exchanges for Engineering Students please visit here. | https://www.tcd.ie/Engineering/international/study-abroad/outgoing/index.php |
d18c119d91c9-2 | For more information on Non-EU Exchanges for Engineering Students please visit here.
Dual Engineering Masters Pathway Programme between Trinity College Dublin
and Columbia University
Trinity College Dublin and Columbia University, New York are delighted to offer a dual Engineering masters pathway programme leading to the award of a professionally-accredited MAI degree by Trinity's School of Engineering and a Master of Science (MS) degree by
Columbia University. Click here to find out more.
UNITECH
Brief Description
First SS semester studying in host university, second SS semester doing an internship in an international company. It is an engineering exchange, with a business/ management focus.
Eligibility
Engineering students only.
Very competitive.
Ideally have a minimum II.1 in SF and JF year.
Must get a II.1 (min. 60%) in JS results in the first sitting of the examinations.
Available Funding | https://www.tcd.ie/Engineering/international/study-abroad/outgoing/index.php |
d18c119d91c9-3 | Available Funding
UNITECH travel grant. (usually €1,000)
Erasmus study grant
Erasmus traineeship grant*
For more information on the UNITECH program, please visit here.
Erasmus & EU
Brief Description
Full year or second semester of SS year studying at a partner university in Europe (predominantly technical universities in CLUSTER network).
Eligibility
Engineering students only.
Some agreements are discipline specific.
Must get a II.1 (min. 60%) in JS results in the first sitting of the examinations.
Available Funding
Erasmus study grant.
For more information on ERASMUS exchanges, please visit here.
Internships
Brief Description
First semester of SS year in Trinity, second semester of SS year on 4E4 internship at home or abroad e.g. Montreal.
4E4 coordinators from each stream can provide discipline-specific information/ advice.
Eligibility | https://www.tcd.ie/Engineering/international/study-abroad/outgoing/index.php |
d18c119d91c9-4 | Eligibility
Engineering students only.
Students in your stream.
Must get a II.1 (min. 60%) in JS results in the first sitting of the examinations.
Available Funding
May be paid/ funded depending on internship/stream.
Montreal internships eligible for scholarships.
European internships eligible for Erasmus traineeship grant*
Independent Summer Internships (Not for Credit)
Brief Description
All students have the option to organise their own summer internship aboard at any stage during their time at Trinity.
Eligibility
All students, during any of their summer vacations, throughout their time in college.
For more information on Independent Internships, please visit here.
Important Information
Permission to study abroad and to have the results credited towards the Trinity degree is at the discretion of each Department. | https://www.tcd.ie/Engineering/international/study-abroad/outgoing/index.php |
d18c119d91c9-5 | Students may only go on exchange in their fourth year for a full academic year or for the second semester. The exchange year for Engineering is only recognised as part of a five-year programme. Students must commit to completing the 5th year at Trinity College Dublin. Failure to complete the final year at TCD will make the student ineligible for a (hons) BAI degree.
Students will be required to submit records of their marks to date in order to apply for most exchange options. Students are usually ranked on their most recent exam results (SF marks), although UNITECH and Erasmus applications also take into account JF results, personal statements etc.
For non-EU exchanges, students must have achieved a II.1 in SF to be able to apply. For all other exchanges, ideally they should have a II.1 in SF. | https://www.tcd.ie/Engineering/international/study-abroad/outgoing/index.php |
d18c119d91c9-6 | All study abroad offers (EU and non-EU) are conditional on you achieving a II.1 in the JS year, so nominations will only be confirmed after your JS exam results have been published. Students will not be permitted to study abroad unless they have achieved at least a II.1 in their Junior Sophister year.
*Erasmus traineeships grants are available for both credit-bearing and independent internships (i.e. voluntary internship that doesn’t form part of your course) in Europe (outside of Ireland!). They require advance applications and some paperwork about learning objectives. | https://www.tcd.ie/Engineering/international/study-abroad/outgoing/index.php |
5aaf2209903a-0 | You are here
Prospective Students > International > Study Abroad > Outgoing > Contact
CONTACTS
Position
Name
Responsibilities
E-mail:
Office location
Global Officer
(School of Engineering)
General Engineering Study Abroad queries
[email protected]
Museum Building
Visiting Student Co-ordinator for Biomedical Engineering
Dr Mark Ahearne
Guidance for Bioengineering students on university choices and modules
[email protected]
Parsons Building
Visiting Student Co-ordinator for Civil, Structural and Environmental Engineering
Dr Sara Pavia
Guidance for Civil Engineering students on university choices and modules
[email protected]
Simon Perry Building
Visiting Student Co-ordinator for Mechanical and Manufacturing Engineering
Dr Garret O'Donnell
Guidance for Mechanical Engineering students on university choices and modules | https://www.tcd.ie/Engineering/international/study-abroad/outgoing/contact/index.php |
5aaf2209903a-1 | Guidance for Mechanical Engineering students on university choices and modules
[email protected]
Parsons Building
Visiting Student Co-ordinator for Computer Engineering
Dr Diana Wilson
Guidance for Computer Engineering students on university choices and modules
[email protected]
7-9 South Leinster St
4.12
Visiting Student Co-ordinator for Electronic Engineering
Dr Arman Farhang
Guidance for Electronic Engineering students on university choices and modules
[email protected]
Aras an Phiarsaigh
Visiting Student Co-ordinator for Engineering with Management
Dr Garret O'Donnell
Guidance for Engineering with Management students on university choices and modules
[email protected]
Parsons Building
Visiting Student Co-ordinator for UNITECH
Dr Garret O'Donnell | https://www.tcd.ie/Engineering/international/study-abroad/outgoing/contact/index.php |
5aaf2209903a-2 | Visiting Student Co-ordinator for UNITECH
Dr Garret O'Donnell
Guidance on the UNITECH programme for all engineering students
[email protected]
Parsons Building
Non-EU exchange coordinator and Student Mobility Officer
General enquiries on the college-wide non-EU exchange programme – applications, paperwork etc.
[email protected]
Academic Registry, Watts Building
Erasmus Office
General enquiries on the Erasmus programme – applications, grants, paperwork etc.
[email protected]
Academic Registry, Watts Building | https://www.tcd.ie/Engineering/international/study-abroad/outgoing/contact/index.php |
6be541e6f10f-0 | You are here
Prospective Students > International > Study Abroad > Incoming
Incoming Students
Trinity Engineering School warmly welcomes Erasmus and international visiting students from all around the globe. The School of Engineering has an active international exchange programme and each year attracts a number of high calibre international students from both within and outside of Europe. We are particularly active in the CLUSTER and UNITECH programmes.
Visiting students may apply to study in the Engineering School for just one semester or the entire academic year. You are expected to fulfil the same module requirements as Trinity students, to remain in residence for the full semester including all of the relevant examinations.
For more information on Study Abroad in Trinity please visit here.
Erasmus & EU Exchange
Non-EU Study Abroad & Exchange
Contacts for Module Choice & Learning Agreements
Available Modules for Visiting Students
Inbound International Student Handbook | https://www.tcd.ie/Engineering/international/study-abroad/incoming/index.php |
ffb730dbce21-0 | You are here
Prospective Students > International > Admissions > How to Apply
International Admissions
The School of Engineering welcomes students from all over the world every year to come together to learn, and shape our world. Apply now to join Trinity College Dublin's 18,000 undergraduate and postgraduate students, from 118 different countries.
How to Apply
Fees and Finance | https://www.tcd.ie/Engineering/international/admissions/howtoapply/index.php |
284f040e1b9c-0 | You are here
Prospective Students > International > Admissions > International Student Support
International Student Services and Support
Moving to a different country and learning in a new environment can be challenging, but at Trinity College Dublin, you will be well supported along the way. There are specialized international student services available, as well as a broad range of college-wide student support services available to you.
Here are a few resources and services that will help guide you while in Trinity:
International Student Experience
The International Student Experience team provides information and advice on getting settled in Trinity, as well as in Dublin. It can be an overwhelming experience, but know that our helpful team members are here to assist.
Find out more by visiting here.
International Student Welcome Guide | https://www.tcd.ie/Engineering/international/admissions/studentservices/index.php |
284f040e1b9c-1 | Find out more by visiting here.
International Student Welcome Guide
An essential handbook for international students. A helpful resource for both new and returning students at Trinity. The guide includes information on pre-arrival preparation, academic expectations, information on college supports and resources, as well as information on public transport, health insurance, visas and registration with the Irish Nationalisation and Immigration Services (INIS).
You can access the Welcome Guide here.
International Student Study Guide
The International Student Study Guide is a comprehensive resource for new international students at Trinity. Although, it is primarily focused on undergraduate students, much of the information is relevant to postgraduate students as well.
You can access the guide here.
Global Room | https://www.tcd.ie/Engineering/international/admissions/studentservices/index.php |
284f040e1b9c-2 | You can access the guide here.
Global Room
Information and Student Space specifically designed to cater to students at Trinity, with a focus on the international student community. The Global Room team provides guidance and support to international students on a wide range of issues, including immigration, accommodation and all aspects of life at Trinity. The Global Ambassador team are current Trinity students trained to help with queries that may arise during the transition to Ireland. Over 300 international-theme events held each year in the Global Room student space, such as national holidays, seminars, movie screenings, and art showcases.
You can find out more about the Global Room by visiting here. | https://www.tcd.ie/Engineering/international/admissions/studentservices/index.php |
c1a6e9cbdae8-0 | You are here
Current Students > Undergraduate > Engineering
Modules for BAI Year 1
Students are required to take the [5 credit] modules:
MAU11E01 Engineering Mathematics I
MAU11E02 Engineering Mathematics II
CSU11E03 Computer Engineering I
PYU11E04 Physics
CHU11E05 Chemistry
EEU11E06 Electrical Engineering
CEU11E07 Mechanics
MEU11E08 Introduction to Professional Engineering
CEU11E09 Engineering Design
MEU11E11 Experimental Methods
MEU11E12 Engineering Materials and Their Applications (10 ECTS)
See also:
Department of Civil, Structural and Environmental Engineering
Department of Electronic and Electrical Engineering
Department of Mechanical and Manufacturing Engineering
School of Computer Science and Statistics
Undergraduate Admissions
BAI Year 1 PDF Format
Examination Timetable
Timetable - Semester 1 | https://www.tcd.ie/Engineering/undergraduate/baiyear2/index.php |
c1a6e9cbdae8-1 | BAI Year 1 PDF Format
Examination Timetable
Timetable - Semester 1
Timetable - Semester 2
Lab/Tutorial Groups
Lab Schedule - Semester 1
Lab Schedule - Semester 2
Lab Marks - Semester 2
Handbook
Examination Regulations
Academic Year Structure | https://www.tcd.ie/Engineering/undergraduate/baiyear2/index.php |
ed333f24b0ce-0 | You are here
Current Students > Undergraduate > Engineering
Modules for BAI Year 1
Students are required to take the [5 credit] modules:
MAU11E01 Engineering Mathematics I
MAU11E02 Engineering Mathematics II
CSU11E03 Computer Engineering I
PYU11E04 Physics
CHU11E05 Chemistry
EEU11E06 Electrical Engineering
CEU11E07 Mechanics
MEU11E08 Introduction to Professional Engineering
CEU11E09 Engineering Design
MEU11E11 Experimental Methods
MEU11E12 Engineering Materials and Their Applications (10 ECTS)
See also:
Department of Civil, Structural and Environmental Engineering
Department of Electronic and Electrical Engineering
Department of Mechanical and Manufacturing Engineering
School of Computer Science and Statistics
Undergraduate Admissions
BAI Year 1 PDF Format
Examination Timetable
Timetable - Semester 1 | https://www.tcd.ie/Engineering/undergraduate/baiyear1/index.php |
ed333f24b0ce-1 | BAI Year 1 PDF Format
Examination Timetable
Timetable - Semester 1
Timetable - Semester 2
Lab/Tutorial Groups
Lab Schedule - Semester 1
Lab Schedule - Semester 2
Lab Marks - Semester 2
Handbook
Examination Regulations
Academic Year Structure | https://www.tcd.ie/Engineering/undergraduate/baiyear1/index.php |
0b663d2f48ec-0 | You are here
Current Students > Undergraduate > Engineering
Engineering
Year 1
Year 2
Year 3
Year 4
Year 5 MAI
Study Abroad
Foundation Scholarship
Transcripts | https://www.tcd.ie/Engineering/undergraduate/bai/index.php |
7862e9e1d2a9-0 | You are here
Current Students > Undergraduate > Engineering
Engineering Modules for Year 5 MAI
Due to the changing nature of covid regulations the assessment and delivery portion of modules may change. Any changes will be communicated to you by the module coordinators.
Choose your stream to see your required modules.
Biomedical Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
MEP55E02
Engineering Research Project [30 ECTS]
Semester One
MEP56BM9
Medical Devices Design Fundamentals
ME5MS3
Supply Chain Management
ME5MS7
Risk Management and Safety Assessment Systems
ME5BIO3
Tissue Engineering
ME5BIO4
Finite Element Analysis
EE5C04
Speech and Audio Engineering
EE5C16 | https://www.tcd.ie/Engineering/undergraduate/bai/year-5/index.php |
7862e9e1d2a9-1 | EE5C04
Speech and Audio Engineering
EE5C16
Deep Learning and its Applications [10 ECTS]
MEP55B21
Neural Signal Analysis [10 ECTS]
Semester Two
ME5BIO7
Advanced Medical Imaging
MEP55BM8
Active Implanted Devices and Systems [10 ECTS]
EE5C01
Motion Picture Engineering
ME5MM1
Advanced Manufacturing II - Additive Manufacturing & Laser Processing
ME5B10
Instrumentation and experimental techniques
Innovation in Product Development
Optional 15 ECTS course. Places are limited and offered competitively at the start of the academic year.
Read more
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Civil, Structural and Environmental Engineering
Module Choices | https://www.tcd.ie/Engineering/undergraduate/bai/year-5/index.php |
7862e9e1d2a9-2 | Civil, Structural and Environmental Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
CEP55E02
Engineering Research Project [30 ECTS]
Semester One
CE7E03
Air Pollution
CE7E07
Sustainable Water Supply and Sanitation
CE7C04
Façade Engineering
CE7J02
Solar Energy Conversions and Applications
CE7J04
Energy Policy and Demand
CE7S01
Geotechnical Engineering
CE7S02
Advanced Computation for Structures
CE7S03
Wind and Earthquake Engineering
CE7S09
Advanced Theory of Structures
CE7T01
Transportation Policy
CE7T02
Transport Modelling and Planning | https://www.tcd.ie/Engineering/undergraduate/bai/year-5/index.php |
7862e9e1d2a9-3 | Transportation Policy
CE7T02
Transport Modelling and Planning
ME5BIO4
Finite Element Analysis
Semester Two
CE7C05
Advanced Spatial Analysis Using GIS
CE7E04
Waste Management and Energy Recovery
CE7E05
Water Quality and Hydrological Modelling
CE7E06
Water Resource Planning and Climate Change
CE7J01
Wind Energy
CE7J06
Wave and Hydro Energy
CE7S04
Bridge Engineering
CE7S05
Advanced Concrete Technology
CE7S06
Soil Structure Interaction
CE7S07
A United Theory of Structures
CE7T04
Transportation Data and Evaluation
CE7T05
Transport Design
Innovation in Product Development | https://www.tcd.ie/Engineering/undergraduate/bai/year-5/index.php |
7862e9e1d2a9-4 | CE7T05
Transport Design
Innovation in Product Development
Optional 15 ECTS course. Places are limited and offered competitively at the start of the academic year.
Read more
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Computer Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
CSP55E02
Engineering Research Project [30 ECTS]
CS7CS3
Advanced Software Engineering [10 ECTS]
Semester One
CSU55001
Fuzzy Logic and Control Systems
CSU55004
Formal Verification
CS7CS4
Machine Learning
CS7DS4
Data Visualisation
CS7CS3
Advanced Software Engineering
CS7IS1
Knowledge and Data Engineering | https://www.tcd.ie/Engineering/undergraduate/bai/year-5/index.php |
7862e9e1d2a9-5 | Advanced Software Engineering
CS7IS1
Knowledge and Data Engineering
CS7IS3
Information Retrieval and Web Search
CS7NS1
Scalable Computing/Internet Applications
CS7NS4
Urban Computing
EEP55M01
Integrated Systems Design
EE5C16
Deep Learning and its Applications [10 ECTS]
Semester Two
CS7DS2
Optimisation Algorithms for Data Analysis
CS7GV3
Real‐time Rendering
CS71S5
Adapative Applications
CS7GV5
Real‐time Animation
CS7IS2
Artificial Intelligence
CS7CS3
Advanced Software Engineering
CS7NS2
Internet of Things
CS7NS5
Security and Privacy | https://www.tcd.ie/Engineering/undergraduate/bai/year-5/index.php |
7862e9e1d2a9-6 | Internet of Things
CS7NS5
Security and Privacy
CS7NS6
Real‐time Rendering
EE5C01
Motion Picture Engineering [10 ECTS]
Innovation in Product Development
Optional 15 ECTS course. Places are limited and offered competitively at the start of the academic year.
Read more
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Electronic and Computer Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
EE/CSP55E02
Engineering Research Project [30 ECTS]
Semester One
CSU55004
Formal Verification
CS7CS4
Machine Learning
CS7IS1
Knowledge and Data Engineering
CS7CS3
Advanced Software Engineering | https://www.tcd.ie/Engineering/undergraduate/bai/year-5/index.php |
7862e9e1d2a9-7 | Knowledge and Data Engineering
CS7CS3
Advanced Software Engineering
EEP55C03
Statistical Signal Processing [10 ECTS]
EEP5C09
Self Organising Technological Networks
EE5M01
Integrated Systems Design
EE5C16
Deep Learning and its Applications [10 ECTS]
EEPMMT07
Audio Engineering
EE5C16
Deep Learning and its Applications [10 ECTS]
EEP55C21
Cyber-physical Systems and Control [10 ECTS]
Semester Two
CS7GV3
Real‐time Rendering
CS7GV5
Real‐time Animation
CS7IS2
Artificial Intelligence
CS7NS2
Internet of Things
CS7CS3
Advanced Software Engineering
CS7NS6 | https://www.tcd.ie/Engineering/undergraduate/bai/year-5/index.php |
7862e9e1d2a9-8 | CS7CS3
Advanced Software Engineering
CS7NS6
Dstributed Systems
CSP55031
Reconfigurable Networks
EE5C01
Motion Picture Engineering [10 ECTS]
EEP55C25
Algorithims for Quantum Computing
EE5M02
Microlectronics
EEP55M08
Digital Image and Video Processing
EEMT17
Spatial Audio
Innovation in Product Development
Optional 15 ECTS course. Places are limited and offered competitively at the start of the academic year.
Read more
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Electronic Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
EEP55E02
Engineering Research Project [30 ECTS]
Semester One | https://www.tcd.ie/Engineering/undergraduate/bai/year-5/index.php |
7862e9e1d2a9-9 | Engineering Research Project [30 ECTS]
Semester One
EEP55C03
Statistical Signal Processing [10 ECTS]
EE5C04
Speech and Audio Engineering
EEP55C09
Self-organising Technological Networks [5 ECTS]
EE5M16
Deep Learning and its Applications [10 ECTS]
EE5M01
Integrated Systems Design
EEPMMT07
Audio Engineering
EEP55C21
Cyber-Physical Systems and Control
EEP55C25
Algorithms for Quantum Computing
Semester Two
EE5C01
Motion Picture Engineering [10 ECTS]
EEP55M08
Digital Image and Video Processing
EEU55M02
Microlectronics
EEMT17
Spatial Audio
CS7NS2
Internet of Things
CSP55031 | https://www.tcd.ie/Engineering/undergraduate/bai/year-5/index.php |
7862e9e1d2a9-10 | Spatial Audio
CS7NS2
Internet of Things
CSP55031
Reconfigurable Networks
Innovation in Product Development
Optional 15 ECTS course. Places are limited and offered competitively at the start of the academic year.
Read more
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Mechanical and Manufacturing Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
MEP55E02
Engineering Research Project [30 ECTS]
Semester One
ME5B09
Control Engineering II
ME5E4
Introduction to Computational Fluid Mechanics
ME5MM3
Supply Chain Management
ME5MM7
Risk Management and Safety Assessment Systems
CE7J04
Energy Policy and Demand
CE7T01 | https://www.tcd.ie/Engineering/undergraduate/bai/year-5/index.php |
7862e9e1d2a9-11 | CE7J04
Energy Policy and Demand
CE7T01
Transportation Policy
ME5BIO4
Finite element analysis
EEP55C21
Cyber Physical Systems and Control
EE5C16
Deep Learning and its Applications
MEP55B15
Low Carbon Transport Technology (Semester 1 & 2 )
MEP55B16
Low Carbon Power Technology (Semester 1 & 2 )
Semester Two
MEP55M10
Turbomachinery [5 ECTS]
CE7J01
Wind Energy
CE7J06
Wave and Hydro Energy
MEP55B14
Engineering Vibrations and Noise [5 ECTS]
EEP55C25
Algorithms for Quantam Computing [5 ECTS] | https://www.tcd.ie/Engineering/undergraduate/bai/year-5/index.php |
7862e9e1d2a9-12 | Algorithms for Quantam Computing [5 ECTS]
EEP55C24
Simulation for Geophysical Modelling [5 ECTS]
ME5B03
Advanced Thermal Fluid Sciences [10 ECTS]
ME5MM1
Advanced Manufacturing II - Additive Manufacturing & Laser Processing
Innovation in Product Development
Optional 15 ECTS course. Places are limited and offered competitively at the start of the academic year.
Read more
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Resources
Timetable - Biomedical
Timetable - Civil
Timetable - Electronic / Elec & Comp
Timetable - Mechanical
Handbook - Biomedical
Handbook - Civil
Handbook - Electronic & Computer
Handbook - Mechanical
Academic Year Structure | https://www.tcd.ie/Engineering/undergraduate/bai/year-5/index.php |
7862e9e1d2a9-13 | Handbook - Mechanical
Academic Year Structure
Examination Timetable
Examination Regulations
Biomedical Engineering
Civil, Structural and Environmental Engineering
Computer Science
Electronic and Electrical Engineering
Mechanical and Manufacturing Engineering | https://www.tcd.ie/Engineering/undergraduate/bai/year-5/index.php |
8b70989c62a5-0 | You are here
Current Students > Undergraduate > Engineering > Year Three
Engineering Modules for Year 3
Due to the changing nature of covid regulations the assessment and delivery portion of modules may change. Any changes will be communicated to you by the module coordinators.
Choose your stream to see your required modules.
Biomedical Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Semester One
MAU33E01
Engineering Mathematics V
MEU33BM1
Anatomy and Physiology
MEU33B04
Mechanical Engineering Materials
MEU33BM4
3D CAD & 3D Printing
EEU33C01
Signals and Systems
Semester Two
EEU33E03
Probability and Statistics
MEU33BM2
Biomedical Design Project
MEU33B03
Mechanics of Solids
MEU33B05 | https://www.tcd.ie/Engineering/undergraduate/bai/year-3/index.php |
8b70989c62a5-1 | Mechanics of Solids
MEU33B05
Mechanics of Machines
MEU33B07
Manufacturing Technology and Systems
MEU33BM3
Quantitative Physiology
Trinity Electives
Students take a Trinity Elective in the first semester:
Trinity Electives
A diverse range of modules to enrich the student learning experience.
Read more
Civil, Structural and Environmental Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Semester One
MAU33E01
Engineering Mathematics V
CEU33A02
Structural Design
CEU33A05
Soil Mechanics
CEU33A07
Transportation and Highway Engineering
CEU33A12
Civil Engineering Design Challenge [10 ECTS]
Semester Two
EEU33E03
Probability and Statistics
CEU33A10 | https://www.tcd.ie/Engineering/undergraduate/bai/year-3/index.php |
8b70989c62a5-2 | EEU33E03
Probability and Statistics
CEU33A10
Surveying and Geo-spatial Planning
CEU33A11
Fluids and Environment
CEU33A04
Structural Analysis
CEU33A08
Geology for Engineers
CEU33A12
Civil Engineering Design Challenge [10 ECTS]
Trinity Electives
Students take a Trinity Elective in the first semester:
Trinity Electives
A diverse range of modules to enrich the student learning experience.
Read more
Computer Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Semester One
MAU33E01
Engineering Mathematics V
EEU33C01
Signals and Systems
EEU33C02
Digital Circuits
CSU33D01
Microprocessor Systems I | https://www.tcd.ie/Engineering/undergraduate/bai/year-3/index.php |
8b70989c62a5-3 | Digital Circuits
CSU33D01
Microprocessor Systems I
CSU33D05
Data Structures and Algorithms
Semester Two
EEU33C07
Digital Systems Design
EEU33E03
Probability and Statistics
CSU23021
Microprocessor Systems II
CSU33D03
Computer Networks
CSU23016
Operating Systems
CSU33D06
Software Design Implementation
Trinity Electives
Students take a Trinity Elective in the first semester:
Trinity Electives
A diverse range of modules to enrich the student learning experience.
Read more
Electronic and Computer Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Semester One
MAU33E01
Engineering Mathematics V
EEU33C01
Signals and Systems
EEU33C02 | https://www.tcd.ie/Engineering/undergraduate/bai/year-3/index.php |
8b70989c62a5-4 | Signals and Systems
EEU33C02
Digital Circuits
CSU33D01
Microprocessor Systems I
CSU33D05
Data Structures and Algorithms
Semester Two
EEU33E03
Probability and Statistics
EEU33C05
Telecommunications
EEU33C07
Digital Systems Design
EEU33C08
Digital Circuits Design
CSU23021
Microprocessor Systems II
CSU33D03
Computer Networks
Trinity Electives
Students take a Trinity Elective in the first semester:
Trinity Electives
A diverse range of modules to enrich the student learning experience.
Read more
Electronic Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Semester One
MAU33E01
Engineering Mathematics V | https://www.tcd.ie/Engineering/undergraduate/bai/year-3/index.php |
8b70989c62a5-5 | Semester One
MAU33E01
Engineering Mathematics V
EEU33C01
Signals and Systems
EEU33C02
Digital Circuits
CSU33D01
Microprocessor Systems I
CSU33D05
Data Structures and Algorithms
Semester Two
EEU33E03
Probability and Statistics
EEU33C03
Analogue Circuits
EEU33C05
Telecommunications
EEU33C07
Digital Systems Design
EEU33C08
Digital Circuits Design
EEU33C09
Analogue Circuit Design Project
Trinity Electives
Students take a Trinity Elective in the first semester:
Trinity Electives
A diverse range of modules to enrich the student learning experience.
Read more
Mechanical and Manufacturing Engineering | https://www.tcd.ie/Engineering/undergraduate/bai/year-3/index.php |
8b70989c62a5-6 | Read more
Mechanical and Manufacturing Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Semester One
MAU33E01
Engineering Mathematics V
MEU33B02
Fluid Mechanics
MEU33B04
Mechanical Engineering Materials
MEU33B09
Universal Design Innovation [5 ECTS]
EEU33C01
Signals and Systems
MEU23B10
3D Computer Aided Design
Semester Two
EEU33E03
Probability and Statistics
MEU33B01
Thermodynamics
MEU33B03
Mechanics of Solids
MEU33B05
Mechanics of Machines
MEU33B07
Manufacturing Technology and Systems
Trinity Electives
Students take a Trinity Elective in the second semester:
Trinity Electives | https://www.tcd.ie/Engineering/undergraduate/bai/year-3/index.php |
8b70989c62a5-7 | Students take a Trinity Elective in the second semester:
Trinity Electives
A diverse range of modules to enrich the student learning experience.
Read more
Resources
Timetable - Biomedical
Timetable - Civil
Lab schedule - Electronic
Timetable - Electronic & Computer
Timetable - Mechanical
Handbook - Biomedical
Handbook - Civil
Handbook - Electronic & Computer
Handbook - Mechanical
Academic Year Structure
Examination Timetable
Examination Regulations
Course Information
Eligibility for Internship and Study Abroad | https://www.tcd.ie/Engineering/undergraduate/bai/year-3/index.php |
8b70989c62a5-8 | Examination Regulations
Course Information
Eligibility for Internship and Study Abroad
In order to be eligible to apply for an international exchange in the Senior Sophister year or to apply for the 4E4 Industrial Partnership/Internship module in the second semester of the Senior Sophister year, students must have a minimum grade of II.1 (60 – 69%) at the first sitting of the Junior Sophister Engineering examinations. Those required to sit supplemental Junior Sophister Engineering examinations will be deemed ineligible to apply. No exceptions to this rule will be considered.
Study abroad opportunities can be viewed here and information on taking an internship can be viewed in the 4E4 module descriptors for each stream on the Senior Sophister page.
Eligibility to proceed to MAI year | https://www.tcd.ie/Engineering/undergraduate/bai/year-3/index.php |
8b70989c62a5-9 | Eligibility to proceed to MAI year
Students must achieve a minimum overall mark of 60% for the combined Junior Sophister and Senior Sophister years (on a 30:70 basis) at the annual session of the B.A.I. degree year in order to be eligible to proceed to the MAI year.
MAI projects
Students will be sent a list of available MAI projects at the end of the Senior Sophister year and asked to rank their preferences from 1 to 5. The allocation is made based on a student's Junior Sophister ranking.
Biomedical Engineering
Computer Science
Civil, Structural and Environmental Engineering
Electronic and Electrical Engineering
Mechanical and Manufacturing Engineering | https://www.tcd.ie/Engineering/undergraduate/bai/year-3/index.php |
ac372d82fa64-0 | You are here
Current Students > Undergraduate > Engineering > Year Four
Engineering Modules for Year 4
Due to the changing nature of covid regulations the assessment and delivery portion of modules may change. Any changes will be communicated to you by the module coordinators.
Choose your stream to see your required modules.
Biomedical Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
MEU44E02
Biomedical Engineering Project [15 ECTS]*
Semester One
CEU44E01
Management for Engineers
MEU44BM1
Cell and Molecular Biology
MEU44BM4
Experimental and Research Methods
MEU44BM5
Biomechanics
MEU44BM6
Biomaterials
MEU44B17
Multibody Dynamics | https://www.tcd.ie/Engineering/undergraduate/bai/year-4/index.php |
ac372d82fa64-1 | Biomaterials
MEU44B17
Multibody Dynamics
EEU44C05
Digital Signal Processing
Semester Two
MEU44B01
Mechanics of Solids
MEU44B02
Forensic Materials Engineering
MEU44B05
Manufacturing Technology
MEU44B06
Manufacturing Systems and Project Management
MEU44B09
Control Engineering I
EEU44C08
Digital Media Processing
MEU44E04
Engineering Project Internship [30 ECTS]
Footnotes:
*
For students exiting with the BAI degree
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Civil, Structural and Environmental Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise. | https://www.tcd.ie/Engineering/undergraduate/bai/year-4/index.php |
ac372d82fa64-2 | Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
CEU44E02
Civil Engineering Project [15 ECTS]*
Semester One
CEU44E01
Management for Engineers
CEU44A31
Environmental Engineering
CEU44A15
Hydraulics & Hydrology
CEU44A51
Geotechnical Engineering
CEU44A61
Structures 1
CEU44E03
Research Methods
Semester Two
CEU44A01
Civil Engineering Materials
CEU44A02
Hydrogeology and Engineering Geology
CEU44A62
Structures 2: Advanced Design of Structures
CEU44A16
Transport Engineering & Modelling
CEU44E04 | https://www.tcd.ie/Engineering/undergraduate/bai/year-4/index.php |
ac372d82fa64-3 | Transport Engineering & Modelling
CEU44E04
Engineering Project Internship [30 ECTS]
Footnotes:
*
For students not taking part in CEU44E04 Engineering Project Internship
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Computer Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
Compulsory
CSU44EE2
Engineering Project [15 ECTS]*
CSU44D01
Information Managment for Engineering]*
EEU44E03
Research methods*
Semester One- Optional
EEU44C01
Integrated Systems Design
EEU44C04
Next Generation Networks
EEU44C05
Digital Signal Processing
EEU44C16 | https://www.tcd.ie/Engineering/undergraduate/bai/year-4/index.php |
ac372d82fa64-4 | EEU44C05
Digital Signal Processing
EEU44C16
Deep Learning and its Applications
CSU34021
Computer Architecture II
CSU44052
Computer Graphics
CSU44053
Computer Vision
CSU44056
Data Visualisation
CSU44000
Internet Applications
Semester Two- Optional
EEU44C08
Digital Image and Video Processing
EEU44C21
Reconfigurable Networks
CSU44D02
Knowledge Engineering
CS7NS5
Security and Privacy
CSU44D02
Knowledge Engineering
CSU44054
Augmented Reality
Footnotes:
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers. | https://www.tcd.ie/Engineering/undergraduate/bai/year-4/index.php |
ac372d82fa64-5 | Electronic and Computer Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
Compulsory
EEU44EE2
Engineering Project [15 ECTS]*
CSU44E01
Mangement for Engineers*
EEU44E03
Research Methods*
EEU44C16
Deep Learning and its applications*
EEU44C05
Digital Signal Processing *
Semester One- Optional
EEU44C01
Integrated Systems Design
EEU4C04
Next Generation Networks
EEU45C09
Self Organising Technological Networks
CSU34021
Computer Architecture II
CSU34041
Information Mangement
CSU44000
Internet Applications
CSU44052
Computer Graphics
CSU44053
Computer Vision | https://www.tcd.ie/Engineering/undergraduate/bai/year-4/index.php |
ac372d82fa64-6 | Computer Graphics
CSU44053
Computer Vision
Semester Two- Optional
CSU44D02
Knowledge Engineering
CSU44054
Augmented Reality [pre-requisites: CSU44052, CSU44053]
CSU44032
Security and Privacy
EEU44C21
Reconfigurable Networks
EEU44C02
Microlectronics
EEU44C08
Digital Image and Video Processing
MEU44B12
Introduction to Autonomous Mobile Robotics
MEU44B09
Control Engineering
EEU44E04
Engineering Project Internship [30 ECTS]
Footnotes:
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Electronic Engineering
Module Choices | https://www.tcd.ie/Engineering/undergraduate/bai/year-4/index.php |
ac372d82fa64-7 | Electronic Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
Semester One
Compulsory
EEU44E03
Research Methods
EEU44C16
Deep Learning and it Applications
EEU44C05
Digital Signal Processing
EEU44EE2
Engineering Project [15 ECTS]
CSU44E01
Management for Engineers
Semester One - Optional
CSU34021
Computer Architecture II
EEU44C01
Integrated Systems Design
EEU44C04
Next Generation Networks
EEU45C09
Self Organising Technological Networks
Semester Two- Optional
MEU44B09
Control Engineering
EEU44C08
Digital Image and Video Processing
EEU44C02 | https://www.tcd.ie/Engineering/undergraduate/bai/year-4/index.php |
ac372d82fa64-8 | Digital Image and Video Processing
EEU44C02
Microelectronics
MEU44B12
Introduction to Autonomous Mobile Robotics
EEU44E04
Engineering Project Internship [30 ECTS]
Footnotes:
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Mechanical and Manufacturing Engineering
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Semester One
CEU44E01
Management for Engineers
MEU44B04
Heat Transfer
MEU4BB07
Computer Aided Design
MEU44B13
Fluid Mechanics
MEU44BM17
Multibody Dynamics
MEU44E03
Research Methods
Semester Two
MEU44E04 | https://www.tcd.ie/Engineering/undergraduate/bai/year-4/index.php |
ac372d82fa64-9 | Research Methods
Semester Two
MEU44E04
Engineering Project Internship [30 ECTS]
MEU44B01
Mechanics of Solids
MEU44B02
Forensic Materials Engineering
MEU44B05
Manufacturing Technology
MEU44B06
Manufacturing Systems and Project Management
MEU44B09
Control Engineering I
MEU44B10
Turbomachinery
EEU44C08
Digital Image and Video Processing
MEU44B14
Engineering Vibrations & Noise
MEU44E02
Mechancial Engineering Research Project
MEU44B12
Introduction to Autonomous Mobile Robotics
Footnotes:
*
For students exiting with the BAI degree | https://www.tcd.ie/Engineering/undergraduate/bai/year-4/index.php |
ac372d82fa64-10 | Footnotes:
*
For students exiting with the BAI degree
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Resources
Timetable - Biomedical
Timetable - Civil
Timetable - Electronic & Computer
Lab Schedule - Electronic
Timetable - Mechanical
Handbook - Biomedical
Handbook - Civil
Handbook - Electronic & Computer
Handbook - Mechanical
Academic Year Structure
Examination Timetable
Examination Regulations
Course Information
Students are afforded the opportunity to further specialise in optional modules offered by each of the Engineering streams in their Senior Sophister year. Many of the modules are single-term courses. This provides flexibility and encourages increased specialist knowledge whilst ensuring graduates are ready to meet the challenges of the outside world.
Eligibility for Internship and Study Abroad | https://www.tcd.ie/Engineering/undergraduate/bai/year-4/index.php |
ac372d82fa64-11 | Eligibility for Internship and Study Abroad
In order to be eligible to apply for an international exchange in the Senior Sophister year or to apply for the 4E4 Industrial Partnership/Internship module in the second semester of the Senior Sophister year, students must have a minimum grade of II.1 (60 – 69%) at the first sitting of the Junior Sophister Engineering examinations. Those required to sit supplemental Junior Sophister Engineering examinations will be deemed ineligible to apply. No exceptions to this rule will be considered.
Study abroad opportunities can be viewed here.
Senior Sophister projects
Students must take a final year project if they intend on leaving after the fourth year and they are not taking the 4E4 Internship.
Eligibility to proceed to MAI year | https://www.tcd.ie/Engineering/undergraduate/bai/year-4/index.php |
ac372d82fa64-12 | Eligibility to proceed to MAI year
Students must achieve a minimum overall mark of 60% for the combined Junior Sophister and Senior Sophister years (on a 30:70 basis) at the annual session of the B.A.I. degree year in order to be eligible to proceed to the MAI year.
MAI projects
Students will be sent a list of available MAI projects at the end of the Senior Sophister year and asked to rank their preferences from 1 to 10. The allocation is made based on a student's Junior Sophister ranking.
2022 - 2023 MAI Project Presentation
Degree awards
Students who exit the course having obtained credit for years one to four of the course are entitled to the degrees of BA and BAI. Students who continue on to the MAI year and obtain credit for all five years of the course are entitled to the degrees of BA and MAI (St.).
Gold Medals | https://www.tcd.ie/Engineering/undergraduate/bai/year-4/index.php |
ac372d82fa64-13 | Gold Medals
Engineering students may be eligible for a Gold Medal on the basis of their degree results at the end of the Senior Sophister year. The Engineering Court of Examiners' meeting at the Annual and Reassessment sessions makes recommendations to Board for the award of Gold Medal to Engineering students based on College criteria. Gold medals are awarded by the Board to candidates of the first class who have shown exceptional merit.
For details on the criteria for the award of Gold Medals see category 1 in the Academic Registry guidelines available at: https://www.tcd.ie/academicregistry/exams/assets/local/gold-medal-criteria.pdf .
Biomedical Engineering
Computer Science
Civil, Structural and Environmental Engineering
Electronic and Electrical Engineering
Mechanical and Manufacturing Engineering | https://www.tcd.ie/Engineering/undergraduate/bai/year-4/index.php |
6034f7c88d1e-0 | You are here
Current Students > Undergraduate > Engineering with Management
Engineering with Management
Year 1
Year 2
Year 3
Year 4
Year 5 MAI
Study Abroad
Foundation Scholarship
Transcripts | https://www.tcd.ie/Engineering/undergraduate/engineering-management/index.php |
bcb717cb39e2-0 | You are here
Current Students > Undergraduate > Engineering with Management > Year Four
Engineering with Management
Modules for Year 4
Due to the changing nature of covid regulations the assessment and delivery portion of modules may change. Any changes will be communicated to you by the module coordinators.
Choose your theme to see your required modules.
MAI track
Theme 1: Energy
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Semester One
MEU44E03
Research Methods
MEU44B07
Computer Aided Engineering
MEU44EM9
User Centred Design Innovation
CEU44E01
Management for Engineers
MEU44B04
Heat Transfer (prerequisite: 3B2 Fluid Mechanics I)
MEU44B13 | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-4/index.php |
bcb717cb39e2-1 | MEU44B13
Fluid Mechanics II (prerequisite: 3B2 Fluid Mechanics I)
Semester Two
MEU44MM1
Additive Manufacturing and Laser Processing
Students choose four of the following modules in S2:
EEU44C08
Digital Image and Video Processing
MEU44B01
Mechanics of Solids
MEU44B02
Forensic Materials Engineering
MEU44B09
Control Engineering I
MEU44B12
Introduction to Autonomous Mobile Robotics
MEU44B14
Engineering Vibrations and Noise
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Theme 2: Bioengineering/Manufacturing
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Semester One | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-4/index.php |
bcb717cb39e2-2 | Module Choices
Modules are 5 ECTS unless indicated otherwise.
Semester One
MEU44E03
Research Methods
MEU44B07
Computer Aided Engineering
MEU44EM9
User Centred Design Innovation
CEU44E01
Management for Engineers
MEU44BM5
Biomechanics
MEU44BM6
Biomaterials
Semester Two
MEU44MM1
Additive Manufacturing and Laser Processing
Students choose four of the following modules in S2:
EEU44C08
Digital Image and Video Processing
MEU44B01
Mechanics of Solids
MEU44B02
Forensic Materials Engineering
MEU44B09
Control Engineering I
MEU44B12
Introduction to Autonomous Mobile Robotics | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-4/index.php |
bcb717cb39e2-3 | Control Engineering I
MEU44B12
Introduction to Autonomous Mobile Robotics
MEU44B14
Engineering Vibrations and Noise
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Theme 3: Mechanical/Manufacturing
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Semester One
MEU44E03
Research Methods
MEU44B07
Computer Aided Engineering
MEU44EM9
User Centred Design Innovation
CEU44E01
Management for Engineers
MEU44EM3
Supply Chain Management (will be mandatory in MAI year if not chosen in SS year)
MEU44B17
Multibody Dynamics (prerequisite: 3B5 Mechanics of Machines)
Semester Two | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-4/index.php |
bcb717cb39e2-4 | Semester Two
MEU44MM1
Additive Manufacturing and Laser Processing
Students choose four of the following modules in S2:
EEU44C08
Digital Image and Video Processing
MEU44B01
Mechanics of Solids
MEU44B02
Forensic Materials Engineering
MEU44B09
Control Engineering I
MEU44B12
Introduction to Autonomous Mobile Robotics
MEU44B14
Engineering Vibrations and Noise
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
BSc track
Theme 1: Energy/Fluids/Manufacturing
Semester One
MEU44E03
Research Methods
MEU44B07
Computer Aided Engineering
MEU44EM9 | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-4/index.php |
bcb717cb39e2-5 | Computer Aided Engineering
MEU44EM9
User Centred Design Innovation
CEU44E01
Management for Engineers
MEU44B04
Heat Transfer (prerequisite: 3B2 Fluid Mechanics I)
MEU44B13
Fluid Mechanics II (prerequisite: 3B2 Fluid Mechanics I)
Semester Two
MEU44E02
Research Project [15 credits]
MEU44MM1
Additive Manufacturing and Laser Processing
Students choose one of the following modules in S2:
EEU44C08
Digital Image and Video Processing
MEU44B01
Mechanics of Solids
MEU44B02
Forensic Materials Engineering
MEU44B09
Control Engineering I
MEU44B12
Introduction to Autonomous Mobile Robotics | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-4/index.php |
bcb717cb39e2-6 | Control Engineering I
MEU44B12
Introduction to Autonomous Mobile Robotics
MEU44B14
Energy Vibrations and Noise
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Theme 2: Bioengineering/Manufacturing
Semester One
MEU44E03
Research Methods
MEU44B07
Computer Aided Engineering
MEU44EM9
User Centred Design Innovation
MEU44BM5
Biomechanics
MEU44BM6
Biomaterials
Semester Two
MEU44E02
Research Project [15 credits]
CEU44E01
Management for Engineers
MEU44MM1
Additive Manufacturing and Laser Processing
Students choose one of the following modules in S2: | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-4/index.php |
bcb717cb39e2-7 | Additive Manufacturing and Laser Processing
Students choose one of the following modules in S2:
EEU44C08
Digital Image and Video Processing
MEU44B01
Mechanics of Solids
MEU44B02
Forensic Materials Engineering
MEU44B09
Control Engineering I
MEU44B12
Introduction to Autonomous Mobile Robotics
MEU44B14
Engineering Vibrations and Noise
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Theme 3: Mechanical/Manufacturing
Semester One
MEU44E03
Research Methods
MEU44B07
Computer Aided Engineering
MEU44EM9
User Centred Design Innovation
CEU44E01
Management for Engineers | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-4/index.php |
bcb717cb39e2-8 | User Centred Design Innovation
CEU44E01
Management for Engineers
MEU44EM3
Supply Chain Management (will be mandatory in MAI year if not chosen in SS year)
MEU44B17
Multibody Dynamics
Semester Two
MEU44E02
Research Project [15 credits]
MEU44MM1
Additive Manufacturing and Laser Processing
Students choose one of the following modules in S2:
EEU44C08
Digital Image and Video Processing
MEU44B01
Mechanics of Solids
MEU44B02
Forensic Materials Engineering
MEU44B09
Control Engineering I
MEU44B12
Introduction to Autonomous Mobile Robotics
MEU44B14
Engineering Vibrations and Noise | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-4/index.php |
bcb717cb39e2-9 | Introduction to Autonomous Mobile Robotics
MEU44B14
Engineering Vibrations and Noise
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Resources
Timetable
Handbook
Academic Year Structure
Examination Timetable
Examination Regulations
Course Information
Generally only those students following a theme through Junior Sophister can pursue that theme through Senior Sophister.
Eligibility for Internship and Study Abroad | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-4/index.php |
bcb717cb39e2-10 | Eligibility for Internship and Study Abroad
In order to be eligible to apply for an international exchange in the Senior Sophister year or to apply for the 4E4 Industrial Partnership/Internship module in the second semester of the Senior Sophister year, students must have a minimum grade of II.1 (60 – 69%) at the first sitting of the Junior Sophister Engineering with Management examinations. Those required to sit supplemental Junior Sophister Engineering with Management examinations will be deemed ineligible to apply. No exceptions to this rule will be considered.
Study abroad opportunities can be viewed here.
The 4E4 module descriptor can be viewed here. 4E4 Internship places are limited and are offered competitively by the Discipline of Mechanical and Manufacturing Engineering during the academic year. Successful students do not take the Engineering Project module and semester 2 modules.
Senior Sophister projects | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-4/index.php |
bcb717cb39e2-11 | Senior Sophister projects
Students must take a final year project if they intend on leaving after the fourth year and they are not taking the 4E4 Internship.
Eligibility to proceed to MAI year
Students must achieve a minimum overall mark of 60% for the combined Junior Sophister and Senior Sophister years (on a 30:70 basis) at the annual session of the B.Sc. degree year in order to be eligible to proceed to the MAI year.
MAI projects
Students will be sent a list of available MAI projects at the end of the Senior Sophister year and asked to rank their preferences from 1 to 5. The allocation is made based on a student's Junior Sophister ranking.
Degree awards | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-4/index.php |
bcb717cb39e2-12 | Degree awards
Students who exit the course having obtained credit for years one to four of the course are entitled to the degree of BSc. Students who continue on to the MAI year and obtain credit for all five years of the course are entitled to the degrees of BSc and MAI (St.).
Gold Medals
Engineering with Management students may be eligible for a Gold Medal on the basis of their degree results at the end of the Senior Sophister year. The Engineering Court of Examiners' meeting at the Annual and Reassessment sessions makes recommendations to Board for the award of Gold Medal to Engineering with Management students based on College criteria. Gold medals are awarded by the Board to candidates of the first class who have shown exceptional merit.
For details on the criteria for the award of Gold Medals see category 1 in the Academic Registry guidelines available at: https://www.tcd.ie/academicregistry/exams/assets/local/gold-medal-criteria.pdf . | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-4/index.php |
18b2372a08c4-0 | You are here
Current Students > Undergraduate > Engineering with Management > Year Three
Engineering with Management
Modules for Year 3
Due to the changing nature of covid regulations the assessment and delivery portion of modules may change. Any changes will be communicated to you by the module coordinators.
Junior Sophister Engineering with Management students can select from one of the following themes:
Theme 1: Energy
Semester One
MAU33E01
Engineering Mathematics V
MEU33EM3
Design II [10 ECTS]
MEU33B02
Fluid Mechanics
MEU33B04
Mechanical Engineering Materials
EEU33C01
Signals and Systems
Semester Two
EEU33E03
Probability and Statistics
MEU33B01
Thermodynamics
MEU33B05
Mechanics of Machines | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-3/index.php |
18b2372a08c4-1 | Thermodynamics
MEU33B05
Mechanics of Machines
MEU33EM1
Manufacturing Technology II
MEU33EM3
Design II [10 ECTS]
MEU33EM5
Manufacturing Systems and Project Management
Students take a Trinity Elective in the first semester:
Trinity Electives
A diverse range of modules to enrich the student learning experience.
Read more
Theme 2: Bioengineering/Manufacturing
Semester One
MAU33E01
Engineering Mathematics V
MEU33EM3
Design II [10 ECTS]
EEU33C01
Signals and Systems
MEU33BM1
Anatomy and Physiology
MEU33B04
Mechanical Engineering Materials
Semester Two
EEU33E03
Probability and Statistics
MEU33B05 | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-3/index.php |
18b2372a08c4-2 | EEU33E03
Probability and Statistics
MEU33B05
Mechanics of Machines
MEU33B03
Mechanics of Solids
MEU33EM1
Manufacturing Technology II
MEU33EM3
Design II [10 ECTS]
MEU33EM5
Manufacturing Systems and Project Management
Students take a Trinity Elective in the first semester:
Trinity Electives
A diverse range of modules to enrich the student learning experience.
Read more
Theme 3: Mechanical/Manufacturing
Semester One
MAU33E01
Engineering Mathematics V
MEU33EM3
Design II [10 ECTS]
EEU33C01
Signals and Systems
MEU33B02
Fluid Mechanics
MEU33B04
Mechanical Engineering Materials
Semester Two | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-3/index.php |
18b2372a08c4-3 | Fluid Mechanics
MEU33B04
Mechanical Engineering Materials
Semester Two
EEU33E03
Probability and Statistics
MEU33B05
Mechanics of Machines
MEU33B03
Mechanics of Solids
MEU33EM1
Manufacturing Technology II
MEU33EM3
Design II [10 ECTS]
MEU33EM5
Manufacturing Systems and Project Management
Students take a Trinity Elective in the first semester:
Trinity Electives
A diverse range of modules to enrich the student learning experience.
Read more
Resources
Timetable
Handbook
Academic Year Structure
Examination Timetable
Examination Regulations
Course Information
Eligibility for Internship and Study Abroad | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-3/index.php |
18b2372a08c4-4 | Examination Regulations
Course Information
Eligibility for Internship and Study Abroad
In order to be eligible to apply for an international exchange in the Senior Sophister year or to apply for the 4E4 Industrial Partnership/Internship module in the second semester of the Senior Sophister year, students must have a minimum grade of II.1 (60 – 69%) at the first sitting of the Junior Sophister Engineering with Management examinations. Those required to sit supplemental Junior Sophister Engineering with Management examinations will be deemed ineligible to apply. No exceptions to this rule will be considered.
Study abroad opportunities can be viewed here and information on taking an internship can be viewed here.
Eligibility to proceed to MAI year | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-3/index.php |
18b2372a08c4-5 | Eligibility to proceed to MAI year
Students must achieve a minimum overall mark of 60% for the combined Junior Sophister and Senior Sophister years (on a 30:70 basis) at the annual session of the B.Sc. degree year in order to be eligible to proceed to the MAI year.
MAI projects
Students will be sent a list of available MAI projects at the end of the Senior Sophister year and asked to rank their preferences from 1 to 5. The allocation is made based on a student's Junior Sophister ranking. | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-3/index.php |
5da465a9cd08-0 | You are here
Current Students > Undergraduate > Engineering with Management > Year Five (MAI)
Engineering with Management
Modules for Year 5 MAI
Due to the changing nature of covid regulations the assessment and delivery portion of modules may change. Any changes will be communicated to you by the module coordinators.
Choose your theme to see your required modules.
Theme 1: Energy/Fluids
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
MEP55E01
Engineering Research Project
[30 ECTS]
Semester One (total 15 - 20 ECTS)
Students choose one to two of the following modules in S1:
ME5MM3
Supply Chain Management (mandatory if not taken in SS year)
STU45006 | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-5/index.php |
5da465a9cd08-1 | Supply Chain Management (mandatory if not taken in SS year)
STU45006
Strategic Information Systems S1 (must be picked with STU45006 S2)
ME5E4
Introduction to Computational Fluid Dynamics
CE7J04
Energy Policy and Demand
Semester Two (total 15 to 20 ECTS)
ME5B03
Advanced Thermal Fluid Sciences
Students choose one to two of the following modules in S2:
STU45006
Strategic Information Systems S2
ME5B11
Advanced Vibrations
CE7J01
Wind Energy
CE7J06
Wave and Hydro Energy
ME5B10
Instrumentation and Experimental Techniques | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-5/index.php |
5da465a9cd08-2 | Wave and Hydro Energy
ME5B10
Instrumentation and Experimental Techniques
Students who took part in recognised internships or study abroad in Senior Sophister year will be accommodated according to the disciplines and comparative modules they have covered, at the discretion of the teaching staff.
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Theme 2: Bioengineering/Manufacturing
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
MEP55E01
Engineering Research Project [30 ECTS]
MEP56BM1
Medical Device Design Innovation Project [10 ECTS]
Semester One
ME5MM7
Risk Management and Safety Assessment Systems
Students choose one of the following modules in S1:
ME5MM3
Supply Chain Management (mandatory if not taken in SS year) | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-5/index.php |
5da465a9cd08-3 | ME5MM3
Supply Chain Management (mandatory if not taken in SS year)
STU45006
Strategic Information Systems S1 (must be picked with STU45006 S2)
ME5BIO4
Finite Element Analysis
CE7J04
Energy Policy and Demand
Semester Two (total 15 to 20 ECTS)
ME5BIO3
Tissue Engineering
Students choose one to two of the following modules in S2:
STU45006
Strategic Information Systems S2
ME5B11
Advanced Vibrations
CE7J01
Wind Energy
CE7J06
Wave and Hydro Energy
ME5B10
Instrumentation and Experimental Techniques | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-5/index.php |
5da465a9cd08-4 | Wave and Hydro Energy
ME5B10
Instrumentation and Experimental Techniques
Students who took part in recognised internships or study abroad in Senior Sophister year will be accommodated according to the disciplines and comparative modules they have covered, at the discretion of the teaching staff.
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Theme 3: Mechanical/Manufacturing
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
MEP55E01
Engineering Research Project [30 ECTS]
Semester One (total 15 - 20 ECTS)
ME5MM7
Risk Management and Safety Assessment Systems
ME5B09
Control Engineering II
Students choose zero to one of the following modules in S1:
EE5C16
Deep Learning and its Applications
STU45006 | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-5/index.php |
5da465a9cd08-5 | EE5C16
Deep Learning and its Applications
STU45006
Strategic Information Systems S1 (must be picked with STU45006 S2)
CE7J04
Energy Policy and Demand
Semester Two (total 15 to 20 ECTS)
Students choose two to three of the following modules in S2:
STU45006
Strategic Information Systems S2
ME5B11
Advanced Vibrations
CE7J01
Wind Energy
CE7J06
Wave and Hydro Energy
ME5B10
Instrumentation and Experimental Techniques
Students who took part in recognised internships or study abroad in Senior Sophister year will be accommodated according to the disciplines and comparative modules they have covered, at the discretion of the teaching staff. | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-5/index.php |
5da465a9cd08-6 | The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Theme 4: Innovation in Product Design
This theme is open for all to apply but places are limited.
Module Choices
Modules are 5 ECTS unless indicated otherwise.
Academic Year
MEP55E01
Engineering Research Project [30 ECTS]
ME5E3
Innovation in Product Design [15 ECTS]
Semester One
ME5MM7
Risk Management and Safety Assessment Systems
Students choose any two of the following modules in S1:
ME5MM3
Supply Chain Management (mandatory if not taken in SS year)
ME5B09
Control Engineering II (prerequisite: ME4B09)
CE7J04
Energy Policy and Demand
MEP56BM1 | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-5/index.php |
5da465a9cd08-7 | CE7J04
Energy Policy and Demand
MEP56BM1
Medical Device Design Innovation Project S1 (prerequisites: MEU44BM5, MEU44BM6)
EE5C16
Deep Learning and its Applications
Semester Two
ME5MM1
Additive Manufacturing and Laser Processing (mandatory for students who did not take MEU44MM1 in SS year)
MEP56BM1
Medical Device Design Innovation Project S2
Students who took part in recognised internships or study abroad in Senior Sophister year will be accommodated according to the disciplines and comparative modules they have covered, at the discretion of the teaching staff.
The availability of modules (or combinations of modules) is subject to Discipline resources, timetabling constraints and student numbers.
Resources
Timetable
Handbook
Academic Year Structure
Examination Timetable
Examination Regulations | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-5/index.php |
d16d2e3d8ad7-0 | You are here
Current Students > Undergraduate > Engineering with Management > Year One
Engineering with Management
Modules for Year 1
Junior Freshman Engineering with Management students are required to take the following modules:
Semester One
MAU11E01
Engineering Mathematics I
CHU11E05
Chemistry
MEU11E12
Engineering Materials and Applications
[10 ECTS]
MEU11EM1
Introduction to Manufacturing
STU11004
Introduction to Management Science [10 ECTS]
Semester Two
MAU11E02
Engineering Mathematics II
PYU11E04
Physics
EEU11E06 | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-1/index.php |
d16d2e3d8ad7-1 | Physics
EEU11E06
Electrical Engineering
MEU11E07
Mechanics
MEU11EM4
Introduction to Computing
STU11004
Introduction to Management Science [10 ECTS]
Resources
Timetable (Semester 2)
Lab/Tutorial Groups
Lab Schedule (Semester 2 - Weeks 2 - 6)
Lab Schedule (Semester 2 - Weeks 8 - 12)
Handbook
Academic Year Structure
Examination Timetable
Examination Regulations
Course Information | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-1/index.php |
d16d2e3d8ad7-2 | Examination Timetable
Examination Regulations
Course Information
In your studies you should aim to work a minimum of 50 hours per week. With a timetabled schedule of about 25 hours per week, this means you should be planning independent study of at least 25 hours per week. This includes reading course material prior to lectures – you should not expect to be given all the module material in the lectures and tutorials. The module descriptors above detail the module content, credit value, module coordinator and mode of assessment. | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-1/index.php |
df72f2787daf-0 | You are here
Current Students > Undergraduate > Engineering with Management > Year Two
Engineering with Management
Modules for Year 2
Due to the changing nature of covid regulations the assessment and delivery portion of modules may change. Any changes will be communicated to you by the module coordinators.
Senior Freshman Engineering with Management students are required to take the following modules:
Semester One
MAU22E01
Engineering Mathematics III
MEU22EM2
Finance
MEU22EM3
Design I
MEU23B10
3D Computer Aided Design
CEU22E04
Solids and Structures
EEU22E06
Electronics
Semester Two
MAU22E02
Engineering Mathematics IV
MEU22E05
Thermo-fluids
MEU22M11
Manufacturing Engineering Design | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-2/index.php |
df72f2787daf-1 | Thermo-fluids
MEU22M11
Manufacturing Engineering Design
MEU33B07
Manufacturing Technology and Systems
EEU22E12
Computational Science and Engineering 1
Students take a Trinity Elective in the second semester:
Trinity Electives
A diverse range of modules to enrich the student learning experience.
Read more
Resources
Timetable
Lab Schedule
Lab and Tutorial Groups
Handbook
Academic Year Structure
Examination Timetable
Examination Regulations
Course Information | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-2/index.php |
df72f2787daf-2 | Examination Timetable
Examination Regulations
Course Information
In your studies you should aim to work a minimum of 50 hours per week. With a timetabled schedule of about 25 hours per week, this means you should be planning independent study of at least 25 hours per week. This includes reading course material prior to lectures – you should not expect to be given all the module material in the lectures and tutorials. The module descriptors above detail the module content, credit value, module coordinator and mode of assessment.
The Foundation Scholarship examinations take place in January 2023. Further information on the syllabus and how to apply is available here. | https://www.tcd.ie/Engineering/undergraduate/engineering-management/year-2/index.php |
d617ebff9617-0 | You are here
Prospective Students > Postgraduate Research
Prospective Postgraduate Research Students
Be part of our multi-disciplinary research team working with academics who are at the cutting edge of their field.
Postgraduate Research | https://www.tcd.ie/Engineering/courses/postgraduate-research/index.php |
d617ebff9617-1 | Postgraduate Research
The School of Engineering has an international reputation for its research activities and currently has an annual research income of €10 million. It awards PhD, MSc by Research and MAI (Ind.) degrees. This serves to support both graduate students and postdoctoral fellows who work in a stimulating environment with modern facilities and equipment. Suitably qualified candidates can apply for registration as a graduate student working in the research areas outlined below and research funding often provides scholarships for research Masters and Doctoral students, to cover the registration, course fees and living costs of research students. Currently, there are over 110 postgraduate research students and a significant number of postdoctoral fellows and research associates, many of whom are from other European and non-European countries. | https://www.tcd.ie/Engineering/courses/postgraduate-research/index.php |
d617ebff9617-2 | Interested candidates are advised to make direct contact with the relevant academic staff member in the first instance. Information on the research activities of the staff can be obtained from the discipline links below.
How to Apply
TCD Postgraduate Information
The School has an international research reputation in many topics, including water engineering, structural materials, behaviour and control, digital media processing, communications engineering, computational engineering, energy, vibrations and acoustics, fluids, fatigue, manufacturing technology, bioengineering, transport modelling, geophysical flows, climate change and geotechnical testing. The research-led school includes internationally renowned experts in their fields. Most of its research is funded through collaborative projects involving industry, the EU and national government programmes. | https://www.tcd.ie/Engineering/courses/postgraduate-research/index.php |
d617ebff9617-3 | The principal topic areas in Civil, Structural and Environmental Engineering are Structural Engineering, Renewable Energy, Environmental Engineering, Transportation (based in the TRIP research centre see https://www.tcd.ie/transport-research/), Geotechnics and Sustainability. While sustainability is high on the agenda in many disciplines in Engineering, there is a specialised research centre in the Michael McNamara Centre for Construction Innovation and Sustainability (known as TrinityHaus). The state-of-the-art laboratories, field units and the wide ranging expertise of both the academic and the technical staff combine to create the largest civil engineering research centre in Ireland.
In Electronic and Electrical Engineering there are a number of main research areas that lie within the broad engineering discipline of Information and Communications Technology, or ICT. | https://www.tcd.ie/Engineering/courses/postgraduate-research/index.php |
d617ebff9617-4 | In Information and Communications Engineering (see https://connectcentre.ie/), activities centre on future communications systems with particular emphasis on reconfigurable and software radio, cognitive wireless networks and dynamic spectrum allocation regimes. Work in signal processing lies broadly in the areas of image/video processing, audio and acoustic signal analysis, speech recognition and synthesis and associated applications.
In ADAPT (see, https://adaptcentre.ie/), the world-leading SFI Research Centre for Digital Media Technology, staff in the School of Engineering contribute to developing next generation digital technologies that transform how people communicate by helping to analyse, personalise and deliver digital data more effectively for businesses and individuals. | https://www.tcd.ie/Engineering/courses/postgraduate-research/index.php |
d617ebff9617-5 | Advanced Engineering Materials and Microelectronic Technology is a well-established research area that includes the design and development of techniques for the measurement of the electrical properties of ferroelectric liquid crystals, glass-forming liquids and polymers and the magnetic and dielectric properties of nano-materials. In the microelectronics fabrication and test area, research interests include the preparation and characterisation of different structures formed on silicon.
Research in the Trinity Centre for Biomedical Engineering (TCBE) (www.tcd.ie/bioengineering) covers neural engineering which involves the design, development and evaluation of biomedical signal processing methods to generate active implantable devices for use in neural engineering applications. There is also work on the design and development of biomedical instrumentation primarily for clinical applications, in particular the non-invasive measurement diagnostic parameters. | https://www.tcd.ie/Engineering/courses/postgraduate-research/index.php |
d617ebff9617-6 | Mechanical, Manufacturing and Biomedical Engineering houses excellent research and laboratory facilities. Projects are carried out by research groups specialising in Fluids, Acoustics and Vibration, Heat Transfer and Thermodynamics, and Manufacturing and Materials Engineering. Researchers in these groups lead research activity in Bioengineering and Energy Devices and Systems.
The research activities of all research groups involve significant work on the application of advanced computer based numerical modelling and simulation for the solution of engineering problems so that there is a common theme of computer based analysis, modelling and experimental validation in each of these areas.
Civil, Structural and Environmental Engineering
Electronic and Electrical Engineering
Mechanical, Manufacturing and Biomedical Engineering | https://www.tcd.ie/Engineering/courses/postgraduate-research/index.php |
End of preview. Expand
in Dataset Viewer.
No dataset card yet
- Downloads last month
- 5