base_model: Yukang/LongAlpaca-70B
inference: false
license: llama2
model_creator: YukangChen
model_name: LongAlpaca 70B
model_type: llama
prompt_template: >
Below is an instruction that describes a task. Write a response that
appropriately completes the request.
### Instruction:
{prompt}
### Response:
quantized_by: TheBloke
TheBloke's LLM work is generously supported by a grant from andreessen horowitz (a16z)
LongAlpaca 70B - GPTQ
- Model creator: YukangChen
- Original model: LongAlpaca 70B
Description
This repo contains GPTQ model files for YukangChen's LongAlpaca 70B.
Multiple GPTQ parameter permutations are provided; see Provided Files below for details of the options provided, their parameters, and the software used to create them.
Repositories available
- AWQ model(s) for GPU inference.
- GPTQ models for GPU inference, with multiple quantisation parameter options.
- 2, 3, 4, 5, 6 and 8-bit GGUF models for CPU+GPU inference
- YukangChen's original unquantised fp16 model in pytorch format, for GPU inference and for further conversions
Prompt template: Alpaca
Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
{prompt}
### Response:
Provided files, and GPTQ parameters
Multiple quantisation parameters are provided, to allow you to choose the best one for your hardware and requirements.
Each separate quant is in a different branch. See below for instructions on fetching from different branches.
Most GPTQ files are made with AutoGPTQ. Mistral models are currently made with Transformers.
Explanation of GPTQ parameters
- Bits: The bit size of the quantised model.
- GS: GPTQ group size. Higher numbers use less VRAM, but have lower quantisation accuracy. "None" is the lowest possible value.
- Act Order: True or False. Also known as
desc_act
. True results in better quantisation accuracy. Some GPTQ clients have had issues with models that use Act Order plus Group Size, but this is generally resolved now. - Damp %: A GPTQ parameter that affects how samples are processed for quantisation. 0.01 is default, but 0.1 results in slightly better accuracy.
- GPTQ dataset: The calibration dataset used during quantisation. Using a dataset more appropriate to the model's training can improve quantisation accuracy. Note that the GPTQ calibration dataset is not the same as the dataset used to train the model - please refer to the original model repo for details of the training dataset(s).
- Sequence Length: The length of the dataset sequences used for quantisation. Ideally this is the same as the model sequence length. For some very long sequence models (16+K), a lower sequence length may have to be used. Note that a lower sequence length does not limit the sequence length of the quantised model. It only impacts the quantisation accuracy on longer inference sequences.
- ExLlama Compatibility: Whether this file can be loaded with ExLlama, which currently only supports Llama models in 4-bit.
Branch | Bits | GS | Act Order | Damp % | GPTQ Dataset | Seq Len | Size | ExLlama | Desc |
---|---|---|---|---|---|---|---|---|---|
main | 4 | None | Yes | 0.1 | c4 | 16384 | 35.33 GB | Yes | 4-bit, with Act Order. No group size, to lower VRAM requirements. |
gptq-4bit-128g-actorder_True | 4 | 128 | Yes | 0.1 | c4 | 16384 | 36.65 GB | Yes | 4-bit, with Act Order and group size 128g. Uses even less VRAM than 64g, but with slightly lower accuracy. |
gptq-4bit-32g-actorder_True | 4 | 32 | Yes | 0.1 | c4 | 16384 | 40.66 GB | Yes | 4-bit, with Act Order and group size 32g. Gives highest possible inference quality, with maximum VRAM usage. |
gptq-3bit-128g-actorder_True | 3 | 128 | Yes | 0.1 | c4 | 16384 | 28.03 GB | No | 3-bit, with group size 128g and act-order. Higher quality than 128g-False. |
How to download, including from branches
In text-generation-webui
To download from the main
branch, enter TheBloke/LongAlpaca-70B-GPTQ
in the "Download model" box.
To download from another branch, add :branchname
to the end of the download name, eg TheBloke/LongAlpaca-70B-GPTQ:gptq-4bit-128g-actorder_True
From the command line
I recommend using the huggingface-hub
Python library:
pip3 install huggingface-hub
To download the main
branch to a folder called LongAlpaca-70B-GPTQ
:
mkdir LongAlpaca-70B-GPTQ
huggingface-cli download TheBloke/LongAlpaca-70B-GPTQ --local-dir LongAlpaca-70B-GPTQ --local-dir-use-symlinks False
To download from a different branch, add the --revision
parameter:
mkdir LongAlpaca-70B-GPTQ
huggingface-cli download TheBloke/LongAlpaca-70B-GPTQ --revision gptq-4bit-128g-actorder_True --local-dir LongAlpaca-70B-GPTQ --local-dir-use-symlinks False
More advanced huggingface-cli download usage
If you remove the --local-dir-use-symlinks False
parameter, the files will instead be stored in the central Huggingface cache directory (default location on Linux is: ~/.cache/huggingface
), and symlinks will be added to the specified --local-dir
, pointing to their real location in the cache. This allows for interrupted downloads to be resumed, and allows you to quickly clone the repo to multiple places on disk without triggering a download again. The downside, and the reason why I don't list that as the default option, is that the files are then hidden away in a cache folder and it's harder to know where your disk space is being used, and to clear it up if/when you want to remove a download model.
The cache location can be changed with the HF_HOME
environment variable, and/or the --cache-dir
parameter to huggingface-cli
.
For more documentation on downloading with huggingface-cli
, please see: HF -> Hub Python Library -> Download files -> Download from the CLI.
To accelerate downloads on fast connections (1Gbit/s or higher), install hf_transfer
:
pip3 install hf_transfer
And set environment variable HF_HUB_ENABLE_HF_TRANSFER
to 1
:
mkdir LongAlpaca-70B-GPTQ
HF_HUB_ENABLE_HF_TRANSFER=1 huggingface-cli download TheBloke/LongAlpaca-70B-GPTQ --local-dir LongAlpaca-70B-GPTQ --local-dir-use-symlinks False
Windows Command Line users: You can set the environment variable by running set HF_HUB_ENABLE_HF_TRANSFER=1
before the download command.
With git
(not recommended)
To clone a specific branch with git
, use a command like this:
git clone --single-branch --branch gptq-4bit-128g-actorder_True https://huggingface.co/TheBloke/LongAlpaca-70B-GPTQ
Note that using Git with HF repos is strongly discouraged. It will be much slower than using huggingface-hub
, and will use twice as much disk space as it has to store the model files twice (it stores every byte both in the intended target folder, and again in the .git
folder as a blob.)
How to easily download and use this model in text-generation-webui.
Please make sure you're using the latest version of text-generation-webui.
It is strongly recommended to use the text-generation-webui one-click-installers unless you're sure you know how to make a manual install.
- Click the Model tab.
- Under Download custom model or LoRA, enter
TheBloke/LongAlpaca-70B-GPTQ
.
- To download from a specific branch, enter for example
TheBloke/LongAlpaca-70B-GPTQ:gptq-4bit-128g-actorder_True
- see Provided Files above for the list of branches for each option.
- Click Download.
- The model will start downloading. Once it's finished it will say "Done".
- In the top left, click the refresh icon next to Model.
- In the Model dropdown, choose the model you just downloaded:
LongAlpaca-70B-GPTQ
- The model will automatically load, and is now ready for use!
- If you want any custom settings, set them and then click Save settings for this model followed by Reload the Model in the top right.
- Note that you do not need to and should not set manual GPTQ parameters any more. These are set automatically from the file
quantize_config.json
.
- Once you're ready, click the Text Generation tab and enter a prompt to get started!
Serving this model from Text Generation Inference (TGI)
It's recommended to use TGI version 1.1.0 or later. The official Docker container is: ghcr.io/huggingface/text-generation-inference:1.1.0
Example Docker parameters:
--model-id TheBloke/LongAlpaca-70B-GPTQ --port 3000 --quantize awq --max-input-length 3696 --max-total-tokens 4096 --max-batch-prefill-tokens 4096
Example Python code for interfacing with TGI (requires huggingface-hub 0.17.0 or later):
pip3 install huggingface-hub
from huggingface_hub import InferenceClient
endpoint_url = "https://your-endpoint-url-here"
prompt = "Tell me about AI"
prompt_template=f'''Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
{prompt}
### Response:
'''
client = InferenceClient(endpoint_url)
response = client.text_generation(prompt,
max_new_tokens=128,
do_sample=True,
temperature=0.7,
top_p=0.95,
top_k=40,
repetition_penalty=1.1)
print(f"Model output: {response}")
How to use this GPTQ model from Python code
Install the necessary packages
Requires: Transformers 4.33.0 or later, Optimum 1.12.0 or later, and AutoGPTQ 0.4.2 or later.
pip3 install transformers optimum
pip3 install auto-gptq --extra-index-url https://huggingface.github.io/autogptq-index/whl/cu118/ # Use cu117 if on CUDA 11.7
If you have problems installing AutoGPTQ using the pre-built wheels, install it from source instead:
pip3 uninstall -y auto-gptq
git clone https://github.com/PanQiWei/AutoGPTQ
cd AutoGPTQ
git checkout v0.4.2
pip3 install .
You can then use the following code
from transformers import AutoModelForCausalLM, AutoTokenizer, pipeline
model_name_or_path = "TheBloke/LongAlpaca-70B-GPTQ"
# To use a different branch, change revision
# For example: revision="gptq-4bit-128g-actorder_True"
model = AutoModelForCausalLM.from_pretrained(model_name_or_path,
device_map="auto",
trust_remote_code=False,
revision="main")
tokenizer = AutoTokenizer.from_pretrained(model_name_or_path, use_fast=True)
prompt = "Tell me about AI"
prompt_template=f'''Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
{prompt}
### Response:
'''
print("\n\n*** Generate:")
input_ids = tokenizer(prompt_template, return_tensors='pt').input_ids.cuda()
output = model.generate(inputs=input_ids, temperature=0.7, do_sample=True, top_p=0.95, top_k=40, max_new_tokens=512)
print(tokenizer.decode(output[0]))
# Inference can also be done using transformers' pipeline
print("*** Pipeline:")
pipe = pipeline(
"text-generation",
model=model,
tokenizer=tokenizer,
max_new_tokens=512,
do_sample=True,
temperature=0.7,
top_p=0.95,
top_k=40,
repetition_penalty=1.1
)
print(pipe(prompt_template)[0]['generated_text'])
Compatibility
The files provided are tested to work with AutoGPTQ, both via Transformers and using AutoGPTQ directly. They should also work with Occ4m's GPTQ-for-LLaMa fork.
ExLlama is compatible with Llama and Mistral models in 4-bit. Please see the Provided Files table above for per-file compatibility.
Huggingface Text Generation Inference (TGI) is compatible with all GPTQ models.
Discord
For further support, and discussions on these models and AI in general, join us at:
Thanks, and how to contribute
Thanks to the chirper.ai team!
Thanks to Clay from gpus.llm-utils.org!
I've had a lot of people ask if they can contribute. I enjoy providing models and helping people, and would love to be able to spend even more time doing it, as well as expanding into new projects like fine tuning/training.
If you're able and willing to contribute it will be most gratefully received and will help me to keep providing more models, and to start work on new AI projects.
Donaters will get priority support on any and all AI/LLM/model questions and requests, access to a private Discord room, plus other benefits.
- Patreon: https://patreon.com/TheBlokeAI
- Ko-Fi: https://ko-fi.com/TheBlokeAI
Special thanks to: Aemon Algiz.
Patreon special mentions: Pierre Kircher, Stanislav Ovsiannikov, Michael Levine, Eugene Pentland, Andrey, 준교 김, Randy H, Fred von Graf, Artur Olbinski, Caitlyn Gatomon, terasurfer, Jeff Scroggin, James Bentley, Vadim, Gabriel Puliatti, Harry Royden McLaughlin, Sean Connelly, Dan Guido, Edmond Seymore, Alicia Loh, subjectnull, AzureBlack, Manuel Alberto Morcote, Thomas Belote, Lone Striker, Chris Smitley, Vitor Caleffi, Johann-Peter Hartmann, Clay Pascal, biorpg, Brandon Frisco, sidney chen, transmissions 11, Pedro Madruga, jinyuan sun, Ajan Kanaga, Emad Mostaque, Trenton Dambrowitz, Jonathan Leane, Iucharbius, usrbinkat, vamX, George Stoitzev, Luke Pendergrass, theTransient, Olakabola, Swaroop Kallakuri, Cap'n Zoog, Brandon Phillips, Michael Dempsey, Nikolai Manek, danny, Matthew Berman, Gabriel Tamborski, alfie_i, Raymond Fosdick, Tom X Nguyen, Raven Klaugh, LangChain4j, Magnesian, Illia Dulskyi, David Ziegler, Mano Prime, Luis Javier Navarrete Lozano, Erik Bjäreholt, 阿明, Nathan Dryer, Alex, Rainer Wilmers, zynix, TL, Joseph William Delisle, John Villwock, Nathan LeClaire, Willem Michiel, Joguhyik, GodLy, OG, Alps Aficionado, Jeffrey Morgan, ReadyPlayerEmma, Tiffany J. Kim, Sebastain Graf, Spencer Kim, Michael Davis, webtim, Talal Aujan, knownsqashed, John Detwiler, Imad Khwaja, Deo Leter, Jerry Meng, Elijah Stavena, Rooh Singh, Pieter, SuperWojo, Alexandros Triantafyllidis, Stephen Murray, Ai Maven, ya boyyy, Enrico Ros, Ken Nordquist, Deep Realms, Nicholas, Spiking Neurons AB, Elle, Will Dee, Jack West, RoA, Luke @flexchar, Viktor Bowallius, Derek Yates, Subspace Studios, jjj, Toran Billups, Asp the Wyvern, Fen Risland, Ilya, NimbleBox.ai, Chadd, Nitin Borwankar, Emre, Mandus, Leonard Tan, Kalila, K, Trailburnt, S_X, Cory Kujawski
Thank you to all my generous patrons and donaters!
And thank you again to a16z for their generous grant.
Original model card: YukangChen's LongAlpaca 70B
LongLoRA and LongAlpaca for Long-context LLMs
For detailed usage and codes, please visit the Github project.
TABLE OF CONTENTS
- News
- Examples
- Highlights
- How to contribute
- Requirements
- Installation and quick guide
- LongAlpaca Data
- Models
- Training
- Evaluation
- Demo
- Data Generation via Pdf2Text
- Citation
- Acknowledgement
- License
News
- [2023.10.8] We release the long instruction-following dataset, LongAlpaca-12k and the corresponding models, LongAlpaca-7B, LongAlpaca-13B, and LongAlpaca-70B.
- (The previous sft models, Llama-2-13b-chat-longlora-32k-sft and Llama-2-70b-chat-longlora-32k-sft, have been depreciated.)
- [2023.10.3] We add support GPTNeoX models. Please refer to this PR for usage. Thanks for @naubull2 for this contribution.
- [2023.9.22] We release all our fine-tuned models, including 70B-32k models, LLaMA2-LongLoRA-70B-32k, LLaMA2-LongLoRA-7B-100k. Welcome to check them out!
- [2023.9.22] We release Paper and this GitHub repo, including training and evaluation code.
LongLoRA: Efficient Fine-tuning of Long-Context Large Language Models [Paper]
Yukang Chen,
Shengju Qian,
Haotian Tang,
Xin Lai,
Zhijian Liu,
Song Han,
Jiaya Jia
Highlights
- In LongLoRA approach, The proposed shifted short attention is easy to implement, compatible with Flash-Attention, and is not required during inference.
- We released all our models, including models from 7B to 70B, context length from 8k to 100k, including LLaMA2-LongLoRA-7B-100k, LLaMA2-LongLoRA-13B-64k, and LLaMA2-LongLoRA-70B-32k.
- We built up a long-context instruction-following dataset, LongAlpaca-12k. We released the corresponding LongAlpaca-7B, LongAlpaca-13B and LongAlpaca-70B models. To our best knowledge, this is the first open-sourced long-context 70B model.
How to Contribute
- Make sure to have git installed.
- Create your own fork of the project.
- Clone the repository on your local machine, using git clone and pasting the url of this project.
- Read both the
Requirements
andInstallation and Quick Guide
sections below. - Commit and push your changes.
- Make a pull request when finished modifying the project.
Usage Requirements
To download and use the pre-trained weights you will need:
- Hugging Face (HF) account with valid email. Note, the email used for HF must alse be used for the license agreement.
- Accept the Meta license and acceptable use policy
Installation and Quick Guide
To install and run the application:
- Fork this repo on github
- Clone the repository on your local machine, using git clone and pasting the url of this project.
- Run the following code:
pip install -r requirements.txt
pip install flash-attn --no-build-isolation
- Use either a Released model or Fine tune a model to fit your preferences.
- Test your model by chat.
- Deploy your own demo.
LongAlpaca Data
LongAlpaca-12k contains 9k long QA data that we collected and 3k short QA sampled from the original Alpaca data. This is to avoid the case that the model might degrade at short instruction following. The data we collect contains various types and amounts as the following figure.
Data | Short QA | Long QA | Total | Download |
---|---|---|---|---|
LongAlpaca-12k | 3k | 9k | 12k | Link |
Following the original Alpaca format, our Long QA data uses the following prompts for fine-tuning:
instruction
:str
, describes the task the model should perform. For example, to answer a question after reading a book section or paper. We vary the contents and questions to make instructions diverse.output
:str
, the answer to the instruction.
We did not use the input
format in the Alpaca format for simplicity.
Models
Models with supervised fine-tuning
Model | Size | Context | Train | Link |
---|---|---|---|---|
LongAlpaca-7B | 7B | 32768 | Full FT | Model |
LongAlpaca-13B | 13B | 32768 | Full FT | Model |
LongAlpaca-70B | 70B | 32768 | LoRA+ | Model (LoRA-weight) |
Models with context extension via fully fine-tuning
Model | Size | Context | Train | Link |
---|---|---|---|---|
Llama-2-7b-longlora-8k-ft | 7B | 8192 | Full FT | Model |
Llama-2-7b-longlora-16k-ft | 7B | 16384 | Full FT | Model |
Llama-2-7b-longlora-32k-ft | 7B | 32768 | Full FT | Model |
Llama-2-7b-longlora-100k-ft | 7B | 100000 | Full FT | Model |
Llama-2-13b-longlora-8k-ft | 13B | 8192 | Full FT | Model |
Llama-2-13b-longlora-16k-ft | 13B | 16384 | Full FT | Model |
Llama-2-13b-longlora-32k-ft | 13B | 32768 | Full FT | Model |
Models with context extension via improved LoRA fine-tuning
Model | Size | Context | Train | Link |
---|---|---|---|---|
Llama-2-7b-longlora-8k | 7B | 8192 | LoRA+ | LoRA-weight |
Llama-2-7b-longlora-16k | 7B | 16384 | LoRA+ | LoRA-weight |
Llama-2-7b-longlora-32k | 7B | 32768 | LoRA+ | LoRA-weight |
Llama-2-13b-longlora-8k | 13B | 8192 | LoRA+ | LoRA-weight |
Llama-2-13b-longlora-16k | 13B | 16384 | LoRA+ | LoRA-weight |
Llama-2-13b-longlora-32k | 13B | 32768 | LoRA+ | LoRA-weight |
Llama-2-13b-longlora-64k | 13B | 65536 | LoRA+ | LoRA-weight |
Llama-2-70b-longlora-32k | 70B | 32768 | LoRA+ | LoRA-weight |
Llama-2-70b-chat-longlora-32k | 70B | 32768 | LoRA+ | LoRA-weight |
Training
Pre-trained weights
We use LLaMA2 models as the pre-trained weights and fine-tune them to long context window sizes. Download based on your choices.
Pre-trained weights |
---|
Llama-2-7b-hf |
Llama-2-13b-hf |
Llama-2-70b-hf |
Llama-2-7b-chat-hf |
Llama-2-13b-chat-hf |
Llama-2-70b-chat-hf |
This project also supports GPTNeoX models as the base model architecture. Some candidate pre-trained weights may include GPT-NeoX-20B, Polyglot-ko-12.8B and other variants.
Fine-tuning
torchrun --nproc_per_node=8 fine-tune.py \
--model_name_or_path path_to/Llama-2-7b-hf \
--bf16 True \
--output_dir path_to_saving_checkpoints \
--cache_dir path_to_cache \
--model_max_length 8192 \
--use_flash_attn True \
--low_rank_training False \
--num_train_epochs 1 \
--per_device_train_batch_size 1 \
--per_device_eval_batch_size 2 \
--gradient_accumulation_steps 8 \
--evaluation_strategy "no" \
--save_strategy "steps" \
--save_steps 1000 \
--save_total_limit 2 \
--learning_rate 2e-5 \
--weight_decay 0.0 \
--warmup_steps 20 \
--lr_scheduler_type "constant_with_warmup" \
--logging_steps 1 \
--deepspeed "ds_configs/stage2.json" \
--tf32 True \
--max_steps 1000
- Please remember to change
path_to/Llama-2-7b-hf
,path_to_saving_checkpoints
,path_to_cache
to your own directory. - Note that you can change
model_max_length
to other values. - You could change
ds_configs/stage2.json
tods_configs/stage3.json
if you want. - Please set
use_flash_attn
asFalse
if you use V100 machines or do not install flash attention. - You can set
low_rank_training
asFalse
if you want to use fully fine-tuning. It will cost more GPU memory and slower, but the performance will be a bit better. - When training is finished, to get the full model weight:
cd path_to_saving_checkpoints && python zero_to_fp32.py . pytorch_model.bin
Supervised Fine-tuning
torchrun --nproc_per_node=8 supervised-fine-tune.py \
--model_name_or_path path_to_Llama2_chat_models \
--bf16 True \
--output_dir path_to_saving_checkpoints \
--model_max_length 32768 \
--use_flash_attn True \
--data_path LongAlpaca-12k.json \
--low_rank_training True \
--num_train_epochs 3 \
--per_device_train_batch_size 1 \
--per_device_eval_batch_size 2 \
--gradient_accumulation_steps 1 \
--evaluation_strategy "no" \
--save_strategy "steps" \
--save_steps 1000 \
--save_total_limit 2 \
--learning_rate 2e-5 \
--weight_decay 0.0 \
--warmup_steps 20 \
--lr_scheduler_type "constant_with_warmup" \
--logging_steps 1 \
--deepspeed "ds_configs/stage2.json" \
--tf32 True
- There is no need to make supervised fine-tuning upon the fine-tuned context extended models. It is all right to directly use base model as Llama2-chat models, as the amount of long instruction following data is enough for SFT.
- Our long instruction following data can be found in LongAlpaca-12k.json.
Get trainable weights in low-rank training
In low-rank training, we set embedding and normalization layers as trainable. Please use the following line to extract the trainable weights trainable_params.bin
from pytorch_model.bin
python3 get_trainable_weights.py --checkpoint_path path_to_saving_checkpoints --trainable_params "embed,norm"
Merge LoRA Weight
Merge the LoRA weights of pytorch_model.bin
and trainable parameters trainable_params.bin
, save the resulting model into your desired path in the Hugging Face format:
python3 merge_lora_weights_and_save_hf_model.py \
--base_model path_to/Llama-2-7b-hf \
--peft_model path_to_saving_checkpoints \
--context_size 8192 \
--save_path path_to_saving_merged_model
For example,
python3 merge_lora_weights_and_save_hf_model.py \
--base_model /dataset/pretrained-models/Llama-2-7b-hf \
--peft_model /dataset/yukangchen/hf_models/lora-models/Llama-2-7b-longlora-8k \
--context_size 8192 \
--save_path /dataset/yukangchen/models/Llama-2-7b-longlora-8k-merged
Evaluation
Perplexity Validation
To evaluate a model that is trained in the low-rank setting, please set both base_model
and peft_model
. base_model
is the pre-trained weight. peft_model
is the path to the saved checkpoint, which should contain trainable_params.bin
, adapter_model.bin
and adapter_config.json
. For example,
python3 eval.py --seq_len 8192 --context_size 8192 --batch_size 1 --base_model path_to/Llama-2-7b-hf --peft_model path_to_saving_checkpoints --data_path pg19/test.bin
To evaluate a model that is fully fine-tuned, you only need to set base_model
as the path to the saved checkpoint, which should contain pytorch_model.bin
and config.json
. peft_model
should be ignored.
python3 eval.py --seq_len 8192 --context_size 8192 --batch_size 1 --base_model path_to_saving_checkpoints --data_path pg19/test.bin
Note that
--seq_len
is to set the sequence length for evaluation.--context_size
is to set the context length of the model during fine-tuning.--seq_len
should not be larger than--context_size
.We have already tokenized the validation and test splits of PG19 and proof-pile dataset into
pg19/validation.bin
,pg19/test.bin
, andproof-pile/test_sampled_data.bin
, with the tokenizer of LLaMA.proof-pile/test_sampled_data.bin
contains 128 documents that are randomly sampled from the total proof-pile test split. For each document, it has at least 32768 tokens. We also release the sampled ids in proof-pile/test_sampled_ids.bin. You can download them from the links below.
Dataset | Split | Link |
---|---|---|
PG19 | validation | pg19/validation.bin |
PG19 | test | pg19/test.bin |
Proof-pile | test | proof-pile/test_sampled_data.bin |
Passkey Retrieval
We provide a manner to test the passkey retrieval accuracy. For example,
python3 passkey_retrivial.py \
--context_size 32768 \
--base_model path_to/Llama-2-7b-longlora-32k \
--max_tokens 32768 \
--interval 1000
- Note that the
context_size
is the context length during fine-tuning. max_tokens
is maximum length for the document in passkey retrieval evaluation.interval
is the interval during the document length increasing. It is a rough number because the document increases by sentences.
Demo
Local Inference
To chat with Llama-2-13b-chat-longlora-32k-sft or Llama-2-70b-chat-longlora-32k-sft, you need to run merge_lora_weights_and_save_hf_model.py
first, and then:
python3 inference.py \
--base_model path_to_model \
--question $question \
--context_size $context_length \
--max_gen_len $max_gen_len \
--flash_attn True \
--material $material_content \
--material_type $material_type \
--material_title $material_title
To ask a question related to a book:
python3 inference.py \
--base_model /data/models/Llama-2-13b-chat-longlora-32k-sft \
--question "Why doesn't Professor Snape seem to like Harry?" \
--context_size 32768 \
--max_gen_len 512 \
--flash_attn True \
--material "materials/Harry Potter and the Philosophers Stone_section2.txt" \
--material_type "book" \
--material_title "Harry Potter and the Philosophers Stone"
Note that you can ignore material_type
or material_title
.
To ask a question related to a paper:
python3 inference.py \
--base_model /data/models/Llama-2-13b-chat-longlora-32k-sft \
--question "What are the main contributions and novelties of this work?" \
--context_size 32768 \
--max_gen_len 512 \
--flash_attn True \
--material "materials/paper1.txt" \
--material_type "paper"
Online Demo
To deploy your own demo run
python3 demo.py \
--base_model path_to_model \
--context_size $context_size \
--max_gen_len $max_gen_len \
--flash_attn True
Example
python3 demo.py \
--base_model /data/models/Llama-2-13b-chat-longlora-32k-sft \
--context_size 32768 \
--max_gen_len 512 \
--flash_attn True
- Note that
flash_attn=True
will make the generation slow but save much GPU memory.
Data Generation via Pdf2text
During our dataset collection, we convert paper and books from pdf to text. The conversion quality has a large influence on the final model quality. We think that this step is non-trivial. We release the tool for the pdf2txt conversion, in the folder pdf2txt
. It is built upon pdf2image
, easyocr
, ditod
and detectron2
. Please refer to the README.md in pdf2txt
for more details.
Citation
If you find this project useful in your research, please consider citing:
@article{longlora,
title={LongLoRA: Efficient Fine-tuning of Long-Context Large Language Models},
author={Yukang Chen and Shengju Qian and Haotian Tang and Xin Lai and Zhijian Liu and Song Han and Jiaya Jia},
journal={arXiv:2309.12307},
year={2023}
}
@misc{long-alpaca,
author = {Yukang Chen and Shaozuo Yu and Shengju Qian and Haotian Tang and Xin Lai and Zhijian Liu and Song Han and Jiaya Jia},
title = {Long Alpaca: Long-context Instruction-following models},
year = {2023},
publisher = {GitHub},
journal = {GitHub repository},
howpublished = {\url{https://github.com/dvlab-research/LongLoRA}},
}
Acknowledgement
- This work is built upon the LLaMA2 as the pre-trained models.
- This work can also be built upon the GPTNeoX-HF which is based upon EleutherAI/GPTNeoX as the pre-trained model architecture.
- This work is based on DeepSpeed, peft, and Flash-Attention2 for acceleration.
- Some evaluation code is modified upon Landmark Attention.
- We use LongChat for the retrieval evaluation.
License
- LongLoRA is licensed under the Apache License 2.0. This means that it requires the preservation of copyright and license notices.
- Data and weights are under CC-BY-NC 4.0 License. They are licensed for research use only, and allowed only non-commercial. Models trained using the dataset should not be used outside of research purposes.