Upload narration_transcript_miscellaneous.json

5_Miscellaneous/narration_transcript_miscellaneous.json

@@ -0,0 +1,102 @@
+[
+    {
+        "category": "miscellaneous",
+        "name": "User_1_1910_tripod_480.mp4",
+        "transcript": " I need to set up this tripod in the room It has to be set up so that it faces this direction and looks straight at that scene  also need the camera first time i check the battery and the smart the card are in lock this take off the cover okay  Place it and adjust the height.  okay so adjusting this a little better and moving this forward slightly  Okay, this looks like it should be pretty accurate."
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_1_1910_tripod2_480.mp4",
+        "transcript": " I'm going to set the tripod up in the other lab and first I'm just going to take this off and carefully place it and carry the tripod with me carefully.  I'm also going to inspect the other lab to see if I can use another tripod stand.  okay and if i try and lock this out it doesn't seem to function properly so delete this for now  I'm returning to this original tripod stand and the plan is to use this for understanding the process from outside perspective for an inspection task. And first what I can do is I can  make all the sides smaller okay and i think this is the smallest that it can be so i'm gonna lock this in place and  place it here at the top test if the approach works or perhaps it would be better to place this at this location that way it can also be inspected using the original  increase the length so i'm going to start increasing the height again carefully open it and lock it open it and lock it again and i will pay attention to this to make sure that it is  somewhat level right now it is not and what's lacking are these two so i will try and open this up to make this a little level um okay lock it lock it and this side also um  okay so relatively stable height okay now i'm going to grab the camera  Check the perspective. Open this up to adjust along the pitch.  carefully position it to face towards the table and lock it in place I'm going to test if I increase the height how does that impact considerably  Okay. This looks quite good to me. I think the setup is now complete. I'll switch this off."
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_1_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_2_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_3_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_4_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_5_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_6_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_7_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_8_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_9_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_10_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_11_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_12_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_13_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_14_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_411_1610_15_480.mp4",
+        "transcript": ""
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_15_412_2709_1_480.mp4",
+        "transcript": " Okay, first I'm going to turn off the light so that I can turn on the light so that I can see better and then I want to take a picture of this object and in order to do that because I want the picture to be stable and I want to take multiple ones probably while I'm doing something I'm going to get a tripod so that the camera is stable and I always get the same picture.  So the tripod is in another room so I'm going to go and get that now. I'm going to open the door and walk over and grab the tripod. So it's right over here. I'm just going to grab it and carry it over.  I'm going to close the door again so that I have a bit of peace and quiet. I'm going to put this down here and I'm going to pull out the legs and for that these screws they have to be loose. I'm just going to pull them all out all three of them so that the tripod can stand  sturdily and then right over here there's a little bubble and I want the bubble to be in the middle which makes sure that the tripod is level and then in turn the camera will be level so I don't get wonky pictures so I'm just going to move these legs around until the bubble is in the center so right now it's here and I want it to be further here meaning that this leg and this leg probably have to go down a bit  like this. Maybe just this one goes up a little bit. This is a bit tricky.  There we go. Now to secure it, I'm just going to screw these and make them tight so that the legs don't move around anymore. And I'm doing that by turning this knob clockwise. And see the bubble is in the middle. It's not perfect, but it's good for our purposes.  And I'm going to put my hair away so that it's not in the way.  Okay, now that that is centered, we also need to move the tripod a bit more. So like this, so that it's centered. And then this bubble is already centered, but I'm going to show how it works anyway. So like this, you can turn it like this to make the bubble be centered and here, but we want it back in the center. I'm going to center by, you loosen these by turning them  to the left and you tighten them by turning them right. So I want this in the middle, so I'm going to tighten that right about there. And now this is not totally centered, so I'm going to move this down a bit.  And there we go. There the bubble is centered. Now I'm going to turn this to the right to make it tight. Now this part I actually need to screw onto my camera. So I'm going to open this by turning this lever to the left. Pushing this down. There we go. Now it's open. I can take it out and screw my camera on top. And my camera is over here.  I'm going to open this camera bag up and this velcro which keeps the camera safe and then I'm taking it out and because I moved the tripod so close to the object I want still want to get a full picture of the object so I'm going to use a wide angle lens which is this bigger one so I'll take this one off and for that I'm just gonna press this button and then  turn this and it comes right off. I'm going to put this over here and then I'll take this out. It has a little lid at the bottom to make sure that nothing scratches or gets on that. I'm going to put this on here to keep this part safe.  There we go. And I'm going to put this on here. And you can see here you have these little grooves which fit into these holes. So I want this to line up here. So I'm going to put this here. And then it takes a bit of wiggling around.  Let me see here. Okay, so these actually have different sizes. So this is the shortest one. And of these, the shortest is this. So this goes right here.  And then I just turn it to secure it. And once that button pops back up, I know it's secure. Okay, now I'm going, I want to screw this onto here so that I can secure the camera to the tripod because this part does not fit on the tripod. So I need to pull this out so that I can move the screw and unscrew it by turning it counterclockwise. And then I've removed the screw. I just need to screw the rest of it out.  There we go. And now I can put this part, which the rubber part goes onto the camera so that it doesn't get damaged. And then I can just screw it back in by turning the screw  clockwise and then pushing this thing down now what I've also noticed is that if I open this up here it doesn't have a battery or an SD card yet so I'm going to put those in there they're in this upper pocket  So this is the SD card. You're always going to put it with the picture facing this way. So I'm just going to put that in right here. And then we have this battery, which goes in like this. And now that's all snapped into place. I can close this again and lock it by turning this little lever to lock.  And now we're all done and ready to take the picture. So I'm going to secure this and I want the short part of this to go in here. And then I can lock that in place by turning this  around and now that is pretty secure and i can take my picture first of course i have to take off the lens covering and then i'm going to turn on my camera by turning this switch over now i can already see that the object is nice and centered the camera is relatively level and i can now take my picture  um by pressing this button on top and it's already focusing some of the objects now that i've taken my picture i can now put the camera back so first i'm going to put the lens covering back on uh well first i'm going to turn the camera off of course then put on the lens covering and now i can take the camera off of the tripod by just turning this thing over  There we go like that. Okay. And now I'm going to, again, take this part off. So turning kind of clockwise, um, I can take the screw out and thereby this part as well. And I can screw this part back in just so everything is as I left it. Um,  by turning clockwise, so to the right. There we go, I'm gonna put this down again, and then because I want to keep these parts safe, I'm just gonna push on top to release the SD card to take it out.  and then move that small blue lever aside so that i can take the battery out and put those back in the little pocket up here close that up with the zipper and i can close this again pushing this to lock and i'm also going to put the other objective back on so i'm going to press this button again to take off  this bigger objective by turning it and then putting the lid back on.  and now I can put this camera back on here again I'm going to look for the smallest opening which happens to be this one see these are bigger so this is the smallest and it's going to fit on the smallest metal part that's sticking out here so that's this part and then I'm just going to fit that in there turn that around and the button is going to pop up  like that and now I know it's secure and I can put everything back as well in here. So first this big lens which goes over here and now the camera can go in here. Maybe this way around. And then I'm going to put this strap in here as well. Close this part to secure it.  and close the bag up and put it back on the table where I got it from. And now for the tripod, I'm also going to put this part back by just sliding the shorter side into here. And then that already snaps into place. Now all I have to do is put the legs back up. So in order to get them moving again, because right now they won't move, I just need to loosen these little screws by turning them counterclockwise.  like so and so now I can move these legs back up and I can now bring the tripod back  Also, in case, because I did not show this before, you can also turn this part to move the tripod up in case you wanted to get a picture from a higher angle. So by turning to the right, move it up. By turning to the left, you move it down. And it's obviously a lot easier when the legs are out. But yeah, now I'm going to put this back in the room.  you  And close this door and I can now turn off the light because I don't need any more light to take pictures."
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_16_411_0810_1_480.mp4",
+        "transcript": " Okay good, I'm now in room 411. I'm going to open the door. Go to room 412. My task is to take some pictures from the camera. Take the camera and the tripod. Close the door.  Go to room 411. Enter the room. Close the door. Turn on the light. What am I doing? First, set up the camera, the tripod. Loose, make it easier.  I'm going to do is find the horizontal level  Okay, the bubble is just in the middle. I can fix. Three ways to rotate. Let's adjust the height.  Take out the camera from the camera bag. Take out the camera. Be careful. And first, I'm going to remove, replace the lens. Be careful with this. Replace with this one.  out the cover on the old one with the CMOS  And then put the battery and SD card back on. Here's the SD card. This way.  When I hear the click, this is good, go. And the battery, this way. So push it, lock it. And then, if we want to put the camera onto this tripod, we need to replace this into plate.  using some tools I might need. Put it on. This goes this way.  make it tight  this big arm okay  horizontal level in the middle  Fix it clockwise. And what I want is to take a picture of the robot arm. Same horizontal, same horizontal, and the lower.  try to put the arm in the middle of the screen take picture of the arm let's see how to zoom in a little bit  Let's take one more picture with the automatic mode.  good and turn it back and turn off the machine back the cover and push this to remove from the tripod the same thing remove this plate  Put this thing back. Remove the battery and SD card. If I click the blue button, click the SD card, it will automatically push off. Put this thing back to the back.  And take out the lens. I click this button and rotate here. Put the cover back on. Put the original.  hearing the click means it's going back on put the camera back to the back put the lens back to the back protect  Back to the normal.  Loose the screw to make the tripod. Fix it a little bit. Take this tripod and the camera back. Turn off the light. Open the door. Close the door.  Knock first. Open the door. Close the door. Put the camera back on the table. Put the tripod back. And open the door. Close the door.  I went back to 4.11, opened the door, closed the door, and finished."
+    },
+    {
+        "category": "miscellaneous",
+        "name": "User_16_User_1_411_1810_1_480.mp4",
+        "transcript": " we need to make it slightly open and probably we might also need to check and change the level I think what we should do is  this okay and check the perspective so that you can have some if it is i'll turn it off good enough perspective now you don't need to take this off oh okay just set this however it was um just like this no it's just another way i think  Okay, just put this on top. Okay. Okay, now we need to adjust the tripods at that. Mm-hmm. Make the bubble inside of the circle. This bubble, yeah. Also here, it's also on. Yeah, but as long as this is aligned. Oh, sure, of course. I don't need to worry about the rest.  I'm sorry. And then fix this. Tighten everything. And then finally do a test. Or lock the feet? Yeah. To lock the feet. And then finally adjust.  And to me, this looks quite good. Okay. The setup is complete."
+    }
+]